915 KF Ti-Touch
2.915.0110
915 KF Ti-Touch
ja
2.915.0110
-
- 容量滴定用ダブルPtリング電極
- 6.00346.100
- 2つの溶融プラチナリングによって従来のプラチナピン電極 (6.0338.100) よりも頑丈で、かつ洗浄しやすくなったカール フィッシャー滴定用の指示電極。
- <p>2つの溶融プラチナリングによって従来のプラチナピン電極 (6.0338.100) よりも頑丈で、かつ洗浄しやすくなったカール フィッシャー滴定用の指示電極。</p>
- PCS
- 1
- Set of seals
- 6.1244.040
- Set of seals for 6.1414.030. The set is comprised of one seal and various O-rings.
- <p>Set of seals for 6.1414.030. The set is comprised of one seal and various O-rings.</p>
- PCS
- 1
- KF Adsorber tube
- 6.1403.040
- Used with KF equipment. Including cover and O-ring.
- Used with KF equipment. Including cover and O-ring.
- PCS
- 1
- KF滴定容器上部 開口部5つ
- 6.1414.030
- カールフィッシャー容量滴定向け。
- カールフィッシャー容量滴定向け。
- PCS
- 1
- Titration vessel / 20-90 mL
- 6.1415.220
- PCS
- 1
- Titration vessel / 50-150 mL
- 6.1415.250
- PCS
- 1
- Threaded stopper / M6
- 6.1446.040
- PCS
- 2
- Stopper / B-14/15 / M8
- 6.1446.090
- PCS
- 1
- Septum 12 mm, 5 pieces
- 6.1448.010
- Set of 5 items.
- Set of 5 items.
- PCS
- 2
- Dosing tip / M8 thread
- 6.1543.110
- Transfer tip with M8 thread
- Transfer tip with M8 thread
- PCS
- 1
- エキストラクターロッド
- 6.1546.030
- 807 Dosing Units または シリンダーユニット OMNIS のピストン用。
- <p>807 Dosing Units または シリンダーユニット OMNIS のピストン用。</p>
- PCS
- 1
- Bottle attachment / GL 45 / green
- 6.1602.105
- For direct dosing from reagent bottles with GL 45 thread.
- <p>For direct dosing from reagent bottles with GL 45 thread.</p>
- PCS
- 2
- Amber glass bottle / 1000 mL / GL 45
- 6.1608.023
- For Exchange Units. Bottle for auxiliary solutions.
- For Exchange Units. Bottle for auxiliary solutions.
- PCS
- 1
- Round glass bottle / 1000 mL / GL 45
- 6.1608.030
- PCS
- 1
- Adsorber tube with tubing nipple
- 6.1609.010
- Lid with tubing nipple.
- <p>Lid with tubing nipple.</p>
- PCS
- 1
- ボトルキャップのオーバーフロー防止
- 6.1623.000
- 廃棄物ボトル用ボトルキャップのオーバーフロー防止、吸引ポンプ使用時、廃棄物ボトルのオーバーフローを防ぎます
- <p>廃棄物ボトル用ボトルキャップのオーバーフロー防止、吸引ポンプ使用時、廃棄物ボトルのオーバーフローを防ぎます</p>
- PCS
- 1
- PVC tubing / 4 mm / 6 mm / 2 m
- 6.1801.120
- PCS
- 1
- PTFE tubing / M8 / 0.5 m
- 6.1805.200
- PCS
- 2
- Tubing adapter olive / M8 outer
- 6.1808.050
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- PCS
- 1
- Tube
- 6.1819.030
- For M8 threaded holes. For 6.1602.1XX bottle attachments and 6.1608.0XX bottles
- For M8 threaded holes. For 6.1602.1XX bottle attachments and 6.1608.0XX bottles
- PCS
- 1
- Tube
- 6.1819.050
- For M8 threaded holes of 6.1602.10X Bottle attachments with 6.1608.030 Aspiration bottle. For 703 and 803 Ti Stand, 681 Pump Unit and 679 Rancimat
- For M8 threaded holes of 6.1602.10X Bottle attachments with 6.1608.030 Aspiration bottle. For 703 and 803 Ti Stand, 681 Pump Unit and 679 Rancimat
- PCS
- 1
- Aspiration tip M8 with M10 screw nipple
- 6.1821.070
- For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.
- <p>For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.</p>
- PCS
- 1
- Stirring bar / 16 mm
- 6.1903.020
- Stirring Bar with magnetic core, PTFE coated, length 16 mm
- Stirring Bar with magnetic core, PTFE coated, length 16 mm
- PCS
- 2
- Stirring bar / 25 mm
- 6.1903.030
- Stirring bar with magnetic core, PTFE covering, length 25 mm.
- <p>Stirring bar with magnetic core, PTFE covering, length 25 mm.</p>
- PCS
- 2
- Clamping ring
- 6.2013.010
- For support rods with a diameter of 10 mm.
- <p>For support rods with a diameter of 10 mm.</p>
- PCS
- 1
- Support rod / 300 mm
- 6.2016.050
- PCS
- 1
- Clip for SGJ 14/15
- 6.2023.020
- Clip for SGJ 14/16
- Clip for SGJ 14/16
- PCS
- 1
- Holding clip for bottles
- 6.2043.005
- Holding spring for reagent bottles in exchange units.
- <p>Holding spring for reagent bottles in exchange units.</p>
- PCS
- 2
- Electrode cable / 1 m / F
- 6.2104.020
- For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
- For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
- PCS
- 1
- 卓上電源アダプタ 100 - 240 V/24 V DC
- 6.2164.010
- 卓上電源アダプタ 915 KF Ti-Touch、916 Ti-Touch、917 Coulometerおよび全てのEco Titratoren / Eco Dosimat向け。
- <p>卓上電源アダプタ 915 KF Ti-Touch、916 Ti-Touch、917 Coulometerおよび全てのEco Titratoren / Eco Dosimat向け。</p>
- PCS
- 1
- Weighing boats
- 6.2412.000
- Weighing boat made of glass for the 6.1414.030 titration vessel lid or the 6.1455.31X, 6.1464.32X, 6.1465.320 titration vessel. For KF water determinations. Including protective tube.
- <p>Weighing boat made of glass for the 6.1414.030 titration vessel lid or the 6.1455.31X, 6.1464.32X, 6.1465.320 titration vessel. For KF water determinations. Including protective tube.</p>
- PCS
- 1
- Hexagon key 4 mm
- 6.2621.030
- PCS
- 1
- Screw nipple
- 6.2730.010
- Made of PP. For 6.1448.010 Septum or for mounting 6.1403.040 Drying tube or 6.0338.100 Electrode in 6.1414.030 and 6.1414.040 KF Titration vessel lids. Used for KF titrations.
- Made of PP. For 6.1448.010 Septum or for mounting 6.1403.040 Drying tube or 6.0338.100 Electrode in 6.1414.030 and 6.1414.040 KF Titration vessel lids. Used for KF titrations.
- PCS
- 2
- Septum stopper
- 6.2730.020
- With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.
- With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.
- PCS
- 1
- Stopper
- 6.2730.030
- Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.
- <p>Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.</p>
- PCS
- 3
- Wrench
- 6.2739.000
- For tightening connectors
- For tightening connectors
- PCS
- 1
- Molecular sieve
- 6.2811.000
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- PCS
- 1
- 807 Dosing Unit 10 mL
- 6.3032.210
- 807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- USB flash drive for Ti-Touch
- 6.6066.000
- USB flash drive for 915 KF Ti-Touch and 916 Ti-Touch.
- USB flash drive for 915 KF Ti-Touch and 916 Ti-Touch.
- PCS
- 1
-
- 800 Dosino (Kabellänge 0.65 m)
- 1.800.0040
- Antrieb mit Schreib-/Lesehardware für intelligente Dosiereinheiten. Mit fest montiertem Kabel (Länge 0.65 m).
- <p>Antrieb mit Schreib-/Lesehardware für intelligente Dosiereinheiten. Mit fest montiertem Kabel (Länge 0.65 m).</p>
- PCS
- 1
- 915 KF Ti-Touch
- 1.915.0010
- PCS
- 1
- 容量滴定用ダブルPtリング電極
- 6.00346.100
- 2つの溶融プラチナリングによって従来のプラチナピン電極 (6.0338.100) よりも頑丈で、かつ洗浄しやすくなったカール フィッシャー滴定用の指示電極。
- <p>2つの溶融プラチナリングによって従来のプラチナピン電極 (6.0338.100) よりも頑丈で、かつ洗浄しやすくなったカール フィッシャー滴定用の指示電極。</p>
- PCS
- 1
- Set of seals
- 6.1244.040
- Set of seals for 6.1414.030. The set is comprised of one seal and various O-rings.
- <p>Set of seals for 6.1414.030. The set is comprised of one seal and various O-rings.</p>
- PCS
- 1
- KF Adsorber tube
- 6.1403.040
- Used with KF equipment. Including cover and O-ring.
- Used with KF equipment. Including cover and O-ring.
- PCS
- 1
- KF滴定容器上部 開口部5つ
- 6.1414.030
- カールフィッシャー容量滴定向け。
- カールフィッシャー容量滴定向け。
- PCS
- 1
- Titration vessel / 20-90 mL
- 6.1415.220
- PCS
- 1
- Titration vessel / 50-150 mL
- 6.1415.250
- PCS
- 1
- Threaded stopper / M6
- 6.1446.040
- PCS
- 2
- Stopper / B-14/15 / M8
- 6.1446.090
- PCS
- 1
- Septum 12 mm, 5 pieces
- 6.1448.010
- Set of 5 items.
- Set of 5 items.
- PCS
- 2
- Dosing tip / M8 thread
- 6.1543.110
- Transfer tip with M8 thread
- Transfer tip with M8 thread
- PCS
- 1
- エキストラクターロッド
- 6.1546.030
- 807 Dosing Units または シリンダーユニット OMNIS のピストン用。
- <p>807 Dosing Units または シリンダーユニット OMNIS のピストン用。</p>
- PCS
- 1
- Bottle attachment / GL 45 / green
- 6.1602.105
- For direct dosing from reagent bottles with GL 45 thread.
- <p>For direct dosing from reagent bottles with GL 45 thread.</p>
- PCS
- 2
- Amber glass bottle / 1000 mL / GL 45
- 6.1608.023
- For Exchange Units. Bottle for auxiliary solutions.
- For Exchange Units. Bottle for auxiliary solutions.
- PCS
- 1
- Round glass bottle / 1000 mL / GL 45
- 6.1608.030
- PCS
- 1
- Adsorber tube with tubing nipple
- 6.1609.010
- Lid with tubing nipple.
- <p>Lid with tubing nipple.</p>
- PCS
- 1
- ボトルキャップのオーバーフロー防止
- 6.1623.000
- 廃棄物ボトル用ボトルキャップのオーバーフロー防止、吸引ポンプ使用時、廃棄物ボトルのオーバーフローを防ぎます
- <p>廃棄物ボトル用ボトルキャップのオーバーフロー防止、吸引ポンプ使用時、廃棄物ボトルのオーバーフローを防ぎます</p>
- PCS
- 1
- PVC tubing / 4 mm / 6 mm / 2 m
- 6.1801.120
- PCS
- 1
- PTFE tubing / M8 / 0.5 m
- 6.1805.200
- PCS
- 2
- Tubing adapter olive / M8 outer
- 6.1808.050
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- PCS
- 1
- Tube
- 6.1819.030
- For M8 threaded holes. For 6.1602.1XX bottle attachments and 6.1608.0XX bottles
- For M8 threaded holes. For 6.1602.1XX bottle attachments and 6.1608.0XX bottles
- PCS
- 1
- Tube
- 6.1819.050
- For M8 threaded holes of 6.1602.10X Bottle attachments with 6.1608.030 Aspiration bottle. For 703 and 803 Ti Stand, 681 Pump Unit and 679 Rancimat
- For M8 threaded holes of 6.1602.10X Bottle attachments with 6.1608.030 Aspiration bottle. For 703 and 803 Ti Stand, 681 Pump Unit and 679 Rancimat
- PCS
- 1
- Aspiration tip M8 with M10 screw nipple
- 6.1821.070
- For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.
- <p>For aspirating reagent in combination with 803 Ti Stand and volumetric Karl Fischer cell. The aspiration tip fits tubing with an M8 thread. The attached tubing nipple has an M10 thread.</p>
- PCS
- 1
- Stirring bar / 16 mm
- 6.1903.020
- Stirring Bar with magnetic core, PTFE coated, length 16 mm
- Stirring Bar with magnetic core, PTFE coated, length 16 mm
- PCS
- 2
- Stirring bar / 25 mm
- 6.1903.030
- Stirring bar with magnetic core, PTFE covering, length 25 mm.
- <p>Stirring bar with magnetic core, PTFE covering, length 25 mm.</p>
- PCS
- 2
- Clamping ring
- 6.2013.010
- For support rods with a diameter of 10 mm.
- <p>For support rods with a diameter of 10 mm.</p>
- PCS
- 1
- Support rod / 300 mm
- 6.2016.050
- PCS
- 1
- Clip for SGJ 14/15
- 6.2023.020
- Clip for SGJ 14/16
- Clip for SGJ 14/16
- PCS
- 1
- Holding clip for bottles
- 6.2043.005
- Holding spring for reagent bottles in exchange units.
- <p>Holding spring for reagent bottles in exchange units.</p>
- PCS
- 2
- Electrode cable / 1 m / F
- 6.2104.020
- For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
- For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
- PCS
- 1
- 卓上電源アダプタ 100 - 240 V/24 V DC
- 6.2164.010
- 卓上電源アダプタ 915 KF Ti-Touch、916 Ti-Touch、917 Coulometerおよび全てのEco Titratoren / Eco Dosimat向け。
- <p>卓上電源アダプタ 915 KF Ti-Touch、916 Ti-Touch、917 Coulometerおよび全てのEco Titratoren / Eco Dosimat向け。</p>
- PCS
- 1
- Weighing boats
- 6.2412.000
- Weighing boat made of glass for the 6.1414.030 titration vessel lid or the 6.1455.31X, 6.1464.32X, 6.1465.320 titration vessel. For KF water determinations. Including protective tube.
- <p>Weighing boat made of glass for the 6.1414.030 titration vessel lid or the 6.1455.31X, 6.1464.32X, 6.1465.320 titration vessel. For KF water determinations. Including protective tube.</p>
- PCS
- 1
- Hexagon key 4 mm
- 6.2621.030
- PCS
- 1
- Screw nipple
- 6.2730.010
- Made of PP. For 6.1448.010 Septum or for mounting 6.1403.040 Drying tube or 6.0338.100 Electrode in 6.1414.030 and 6.1414.040 KF Titration vessel lids. Used for KF titrations.
- Made of PP. For 6.1448.010 Septum or for mounting 6.1403.040 Drying tube or 6.0338.100 Electrode in 6.1414.030 and 6.1414.040 KF Titration vessel lids. Used for KF titrations.
- PCS
- 2
- Septum stopper
- 6.2730.020
- With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.
- With E.301.0041 O-ring. For 6.1448.010 Septum and 6.1414.030 Titration vessel lid. Used for KF applications.
- PCS
- 1
- Stopper
- 6.2730.030
- Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.
- <p>Complete with nipple and O-ring. For 6.1414.030 titration vessel lids. For KF instruments, VA measurement stands, VA Computrace and IC Dilution.</p>
- PCS
- 3
- Wrench
- 6.2739.000
- For tightening connectors
- For tightening connectors
- PCS
- 1
- Molecular sieve
- 6.2811.000
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- PCS
- 1
- 807 Dosing Unit 10 mL
- 6.3032.210
- 807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- USB flash drive for Ti-Touch
- 6.6066.000
- USB flash drive for 915 KF Ti-Touch and 916 Ti-Touch.
- USB flash drive for 915 KF Ti-Touch and 916 Ti-Touch.
- PCS
- 1
-
- Polytron PT 1300 D
- 2.136.0100
- Polytron PT 1300 D - Metrohm バージョンOMNIS Software、tiamo™ または Touch Control による直接操作が可能なホモゲナイザー。Polytron PT1300 D は制御装置と駆動システムから構成されています。駆動システムのカップリングシステムにより、余計なツールを使用することなくユニットを容易かつ迅速に交換することが可能です。固体のサンプルを難なくすり潰すことができます。この装置は粘性を有するサンプルを均一に混ぜ合わせるのにも大変適しています。
- <p>Polytron PT 1300 D - Metrohm バージョン</p><p>OMNIS Software、tiamo™ または Touch Control による直接操作が可能なホモゲナイザー。</p><p>Polytron PT1300 D は制御装置と駆動システムから構成されています。駆動システムのカップリングシステムにより、余計なツールを使用することなくユニットを容易かつ迅速に交換することが可能です。<br/>固体のサンプルを難なくすり潰すことができます。この装置は粘性を有するサンプルを均一に混ぜ合わせるのにも大変適しています。</p>
- PCS
- 1
- 感熱式プリンタ Custom Q3X
- 2.142.0100
- 以下の装置のためのUSBインターフェース付きコンパクトプリンター 900 Touch Control; 915 KF Ti-Touch; 916 Ti-Touch; 917 Coulometer; 877 / 848 Titrino plus; 865 / 876 Dosimat plus; 91X Meter (ケーブル6.2151.140); Eco Dosimat / Titrator; 862 Compact Titrosampler; 870 KF Titrino plus; 899 Coulometer; 用紙幅 60 mm (40 字)。USBケーブル 6.2151.120 付属。
- <p>以下の装置のためのUSBインターフェース付きコンパクトプリンター<br /> </p><ul><li>900 Touch Control</li><li>915 KF Ti-Touch</li><li>916 Ti-Touch</li><li>917 Coulometer</li><li>877 / 848 Titrino plus</li><li>865 / 876 Dosimat plus</li><li>91X Meter (ケーブル6.2151.140)</li><li>Eco Dosimat / Titrator</li><li>862 Compact Titrosampler</li><li>870 KF Titrino plus</li><li>899 Coulometer</li></ul><p><br />用紙幅 60 mm (40 字)。USBケーブル 6.2151.120 付属。</p>
- PCS
- 1
- ドットインパクトプリンター TX-900MH
- 2.143.0200
- 以下の製品ためのUSBおよびRS232インターフェース付きコンパクト ドットインパクトプリンター 900 Touch Control (+); 915 KF Ti-Touch (+); 916 Ti-Touch (+); 917 Coulometer (+); 91X Meter (+)Eco Dosimat / Titrator (+); 877 / 848 Titrino plus (6.2151.100 の追加必要); 865 / 876 Dosimat plus (6.2151.100 の追加必要); 862 Compact Titrosampler (6.2151.100 の追加必要); 870 KF Titrino plus (6.2151.100 の追加必要); 899 Coulometer (6.2151.100 の追加必要); (+) ケーブルが納品内容に含まれています
- <p> 以下の製品ためのUSBおよびRS232インターフェース付きコンパクト ドットインパクトプリンター </p><ul><li>900 Touch Control (+)</li><li>915 KF Ti-Touch (+)</li><li>916 Ti-Touch (+)</li><li>917 Coulometer (+)</li><li>91X Meter (+)<br/>Eco Dosimat / Titrator (+)</li><li>877 / 848 Titrino plus (6.2151.100 の追加必要)</li><li>865 / 876 Dosimat plus (6.2151.100 の追加必要)</li><li>862 Compact Titrosampler (6.2151.100 の追加必要)</li><li>870 KF Titrino plus (6.2151.100 の追加必要)</li><li>899 Coulometer (6.2151.100 の追加必要)</li></ul><p> </p><p>(+) ケーブルが納品内容に含まれています</p>
- PCS
- 1
- 800 Dosino
- 2.800.0010
- 800 Dosino 高機能電動ビュレットのドージングユニット用書き込み・読み取り用ハードウェア付き駆動部。固定されたケーブル付き (長さ150 cm)。
- <p>800 Dosino 高機能電動ビュレットのドージングユニット用書き込み・読み取り用ハードウェア付き駆動部。固定されたケーブル付き (長さ150 cm)。</p>
- PCS
- 1
- 805 Dosimat
- 2.805.0010
- Dosing device for the Titrando and Sample Processors with read/write hardware for intelligent Exchange Units. With permanently attached cable. Without Exchange Unit.
- Dosing device for the Titrando and Sample Processors with read/write hardware for intelligent Exchange Units. With permanently attached cable. Without Exchange Unit.
- PCS
- 1
- 810 Sample Processor
- 2.810.0010
- 916 Ti-Touch または 915 KF Ti-Touch を用いたルーチンサンプルの自動分析のためのサンプルプロセッサー。少量から中量までの、連続した、カール フィッシャー滴定などの電位差滴定の自動処理のための、ワークステーションおよび内蔵式ダイヤフラムポンプ付きサンプルプロセッサー。内蔵式ポンプの他に、もう一つのポンプ(ダイヤフラムポンプもしくはペリスタリックポンプ)とリキッドハンドリングの作業のためのドージングデバイスを3つまで接続することができます。様々な用途に対応するため、ラック、スターラー、滴定ヘッド、スイングヘッド、サンプル容器などはアプリケーションに合わせて別途ご注文ください。
- <p>916 Ti-Touch または 915 KF Ti-Touch を用いたルーチンサンプルの自動分析のためのサンプルプロセッサー。<br/><br/>少量から中量までの、連続した、カール フィッシャー滴定などの電位差滴定の自動処理のための、ワークステーションおよび内蔵式ダイヤフラムポンプ付きサンプルプロセッサー。内蔵式ポンプの他に、もう一つのポンプ(ダイヤフラムポンプもしくはペリスタリックポンプ)とリキッドハンドリングの作業のためのドージングデバイスを3つまで接続することができます。<br/><br/>様々な用途に対応するため、ラック、スターラー、滴定ヘッド、スイングヘッド、サンプル容器などはアプリケーションに合わせて別途ご注文ください。</p><p> </p>
- PCS
- 1
- Holder for Polytron
- 6.2047.110
- Holder to fix the Polytron at the stand rod.
- Holder to fix the Polytron at the stand rod.
- PCS
- 1
- Protective cover for 900 Touch Control
- 6.2723.300
- Protective cover for 900 Touch Control
- Protective cover for 900 Touch Control
- PCS
- 1
- 807 Dosing Unit 2 mL
- 6.3032.120
- 807 Dosing Unit、2 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、2 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- 807 Dosing Unit 5 mL
- 6.3032.150
- 807 Dosing Unit、5 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、5 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- 807 Dosing Unit 20 mL
- 6.3032.220
- 807 Dosing Unit、20 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、20 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- 807 Dosing Unit 50 mL
- 6.3032.250
- 807 Dosing Unit、50 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、50 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1