元の言語のページへ戻りました
5リング電気伝導度測定セル c = 0.7cm-1Pt1000付き (固定式ケーブル、0.65 m)

5リング電気伝導度測定セル c = 0.7cm-1Pt1000付き (固定式ケーブル、0.65 m)

6.00925.100

5リング電気伝導度測定セル c = 0.7cm-1Pt1000付き (固定式ケーブル、0.65 m)

ja

6.00925.100

特長

セル定数c = 0.7 cm-1 (指針値) の5リング電気伝導度測定セル、内蔵型Pt1000温度センサーおよびOMNIS Measuring Module Conductivityとの接続のための固定式ケーブル (0.65 m) 付き。
このセンサーは、以下の液体などにおける中程度の電気伝導度 (5 µS/cmから20 mS/cm) の測定に適しています:

  • 飲料水
  • 表流水
  • 廃水

 

技術仕様

Shaft materialPEEK
Shaft material (completion)PCTFE/PEEK
測定レンジ(理論値)0.005...200
Measuring unitmS/cm
Temperature range, long-term (°C)0...70
Temperature range, short-term (°C)0...70
Max. installation length (mm)125
SGJ sleeveフレキシブルな摺り接手
Shaft diameter top (mm)12
Shaft diameter bottom (mm)12
Min. immersion depth (mm)34
Electrode plug-in headFixed cable, plug N
Temperature sensorPt1000
Type5-ring, Pt
セル定数、指針値 (1/cm)0.7
このフィールドは必須です。
    • Sleeve with SGJ 14/12 mm
    • 6.1236.050
    • Sleeve with SGJ 14/12 mm, polyethylene.
    • Sleeve with SGJ 14/12 mm, polyethylene.
    • PCS
    • 1
    • Sleeve with SGJ 14/12 mm
    • 6.1236.050
    • Sleeve with SGJ 14/12 mm, polyethylene.
    • Sleeve with SGJ 14/12 mm, polyethylene.
    • PCS
    • 1
    • 測定モジュール 電気伝導度
    • 6.02101.020
    • 電気伝導度測定セルと接続するための OMNIS Titrator もしくは滴定モジュールの計測チャンネル。
    • <p>電気伝導度測定セルと接続するための OMNIS Titrator もしくは滴定モジュールの計測チャンネル。</p>
    • PCS
    • 1
    • KCl ion standard 250 mL
    • 6.2301.060
    • KCl ion standard (c(ion) = 0.1000 +/-0.0005 mol/L), can also be used as standard solution for conductometry 12.87 mS/cm (25 °C).
    • <p>KCl ion standard (c(ion) = 0.1000 +/-0.0005 mol/L), can also be used as standard solution for conductometry 12.87 mS/cm (25 &deg;C).</p>
    • PCS
    • 1
    • Conductivity standard 100 µS/cm 250 mL
    • 6.2324.010
    • Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
    • Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
    • PCS
    • 1
    • Conductivity standard 100 µS/cm, 5 x 30 mL
    • 6.2324.110
    • Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
    • Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
    • PCS
    • 1