Pt1000 を備えた dUnitrode
6.00200.300
Pt1000 を備えた dUnitrode
ja
6.00200.300
特長
Pt1000 温度センサー内蔵のデジタル複合 pH 電極。これらは、特に以下に適しています:
- 困難な、または粘性の高い、あるいはアルカリ性のサンプルでの pH 測定および滴定
- 高温時
- 長期測定
固定グランドジョイントダイアフラムは汚れに対して耐性があります。
参照電解液(さんしょうでんかいえき): c(KCl) = 3 mol/L、保存液で保管。
あるいは: T>80°C での測定用参照内部液: Idrolyte、Idrolyte で保管。
dTrode は OMNIS Titrator にて使用できます。
技術仕様
| Shaft material | Glass |
|---|---|
| Measuring unit | pH |
| Temperature range, long-term (°C) | 0 ... 80 |
| Temperature range, short-term (°C) | 0 .... 100 |
| 使用可能pH範囲 | 0...14 |
| Max. installation length (mm) | 125 |
| SGJ sleeve | フレキシブルなジョイントソケット |
| Shaft diameter top (mm) | 12 |
| Shaft diameter bottom (mm) | 12 |
| Min. immersion depth (mm) | 20 |
| Electrode plug-in head | Metrohm plug-in head Q |
| Temperature sensor | Pt1000 |
| Indicator electrode shape | Hemisphere |
| Membrane glass type | U |
| Membrane resistance | 150...600 |
| Electrode zero point (mV) | ±15 |
| Electrode slope | >0.97 |
| Diaphragm | Fixed ground-joint diaphragm |
| Reference electrolyte type | c(KCl) = 3 mol/L |
| 10 cmの水カラムでの内部液流量 (µL/h) | 5...30 |
| Reference system | LL system |
| Resistance (kOhm) | < 5 |
-
- 電極ケーブル プラグへッド Q / プラグ P、0.55 m
- 6.02104.300
- dTrode (プラグへッド Q) を OMNIS のデジタル測定モジュールに接続するケーブル
- <p>dTrode (プラグへッド Q) を OMNIS のデジタル測定モジュールに接続するケーブル</p>
- PCS
- 1
- 電極ケーブル プラグへッド Q / プラグ P、1.5 m
- 6.02104.310
- dTrode (プラグへッド Q) を OMNIS のデジタル測定モジュールに接続するケーブル
- <p>dTrode (プラグへッド Q) を OMNIS のデジタル測定モジュールに接続するケーブル</p>
- PCS
- 1
- Electrolyte 3 mol/L KCl (250 mL)
- 6.2308.020
- Electrolyte solution c(KCl) = 3 mol/L, (for Ag/AgCl reference systems)
- PCS
- 1
- Idrolyte (250 mL)
- 6.2308.040
- Idrolyte (for 6.0224.100 Electrode and Unitrode at T >80°C)
- PCS
- 1
- Storage solution
- 6.2323.000
- Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L
- PCS
- 1
- pHit kit
- 6.2325.000
- Maintenance kit for pH electrodes The kit contains:50 mL cleaning solution; 50 mL 3M KCl solution; 50 mL storage solution; 2 Storage vessels; Instructions for use;
- PCS
- 1
- 洗浄液 3 x 50 mL
- 6.2325.100
- Reliable measuring results over long periods of time can be guaranteed only if the pH glass membrane and the diaphragm receive preventive and regular care. Cleaning by etching with toxic chemicals or applying mechanical treatment to the diaphragm is not only complicated and expensive, it also accelerates the ageing of the pH glass electrode.The cleaning solution was developed for easy and gentle cleaning of pH glass electrodes. Regular use can considerably prolong their service life.This cleaning solution is also part of the pHit kit.
- PCS
- 1