Metrohm Combustion IC マニュアル - 石英
2.930.9030
-
- Boat Introduction Module、石英
- 6.07311.010
- 石英燃焼チューブと共に使用する Combustion IC のための Boat Introduction Module。このモジュールにより、サンプルはサンプル用るつぼを用いて燃焼のためオーブンに移されます。サンプル用るつぼを取り扱うためのピンセットとペトリ皿も含まれています。
- <p>石英燃焼チューブと共に使用する Combustion IC のための Boat Introduction Module。このモジュールにより、サンプルはサンプル用るつぼを用いて燃焼のためオーブンに移されます。<br/>サンプル用るつぼを取り扱うためのピンセットとペトリ皿も含まれています。</p>
- PCS
- 1
- 石英燃焼チューブ (TEI)
- 6.07311.100
- Combustion Oven のための石英燃焼チューブ (TEI)。
- <p>Combustion Oven のための石英燃焼チューブ (TEI)。</p>
- PCS
- 1
- Metrosep A PCC 2 HC/4.0
- 6.1006.340
- 陰イオン濃縮ならびにマトリックス除去用です。 充填ベッドの拡大は、PEEK 製両濃縮カラムの容量を増大します。 特にマトリックス効果が濃縮カラムの過負荷となる場合、あるいはサンプルを高度のイオン強度で解析するべき場合に、大きな容量が必要となります。
- <p>陰イオン濃縮ならびにマトリックス除去用です。 充填ベッドの拡大は、PEEK 製両濃縮カラムの容量を増大します。 特にマトリックス効果が濃縮カラムの過負荷となる場合、あるいはサンプルを高度のイオン強度で解析するべき場合に、大きな容量が必要となります。</p>
- PCS
- 1
- Metrosep A Trap 1 - 100/4.0
- 6.1014.000
- 溶離液流の洗浄のために用いられる大容量の陰イオンカラム。試薬の品質が「Ultrapur」や「puriss」などの最高レベルであっても、ごくわずかな陰イオンの汚れが混入している場合があります。これらはMetrosep A Trap 1 - 100/4.0によって確実に取り除くことができます。このカラムは、特にグラジェントアプリケーションにて使用されます。
- <p>溶離液流の洗浄のために用いられる大容量の陰イオンカラム。試薬の品質が「Ultrapur」や「puriss」などの最高レベルであっても、ごくわずかな陰イオンの汚れが混入している場合があります。これらはMetrosep A Trap 1 - 100/4.0によって確実に取り除くことができます。</p><p>このカラムは、特にグラジェントアプリケーションにて使用されます。</p>
- PCS
- 1
- Metrosep I Trap 1 - 100/4.0
- 6.1014.200
- Metrosep I Trap 1 - 100/4.0 カラムは、水溶液中のイオン性、すなわち陽イオンおよび陰イオン性の汚染を除去するのに使用されます。特に「MISP」、すなわち「メトロームインラインサンプル前処理」の一環における給送水の洗浄において、その使用が推奨されます。Metrosep I Trap 1 - 100/4.0 カラムの使用により、システムブランクへの給送水の影響を大きく抑制することができます。
- <p>Metrosep I Trap 1 - 100/4.0 カラムは、水溶液中のイオン性、すなわち陽イオンおよび陰イオン性の汚染を除去するのに使用されます。特に「MISP」、すなわち「メトロームインラインサンプル前処理」の一環における給送水の洗浄において、その使用が推奨されます。Metrosep I Trap 1 - 100/4.0 カラムの使用により、システムブランクへの給送水の影響を大きく抑制することができます。</p>
- PCS
- 1
- エキストラクターロッド
- 6.1546.030
- 807 Dosing Units または シリンダーユニット OMNIS のピストン用。
- <p>807 Dosing Units または シリンダーユニット OMNIS のピストン用。</p>
- PCS
- 2
- Bottle attachment / GL 45 - 3 x UNF 10/32
- 6.1602.150
- For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.
- <p>For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.</p>
- PCS
- 1
- 溶離液および試薬のためのボトルキャップGL 45
- 6.1602.160
- 溶離液ボトル、試薬ボトルおよび洗浄ボトル用、乾燥管および吸引チューブ用コネクタ付き。
- <p>溶離液ボトル、試薬ボトルおよび洗浄ボトル用、乾燥管および吸引チューブ用コネクタ付き。</p>
- PCS
- 2
- Drying bottle / 100 mL / GL 45
- 6.1608.050
- PCS
- 1
- Eluent bottle / 2 L / GL 45
- 6.1608.070
- PCS
- 2
- Adsorbing tube, large and bent
- 6.1609.000
- For filling with adsorber material.
- For filling with adsorber material.
- PCS
- 2
- Thread adapter S 40 to GL 45
- 6.1618.020
- Adapter for bottles with S40 thread (Merck...) to GL45.
- Adapter for bottles with S40 thread (Merck...) to GL45.
- PCS
- 2
- PTFE capillary 0.5 mm i.d. / 3 m
- 6.1803.030
- Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
- Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
- PCS
- 3
- PTFE 製キャピラリー 0.75 mm 内径 / 3 m
- 6.1803.160
- 920 Absorber Module で使用するための PTFE 製キャピラリー。
- <p>920 Absorber Module で使用するための PTFE 製キャピラリー。</p>
- PCS
- 4
- FEP tubing / M6 / 13 cm
- 6.1805.010
- With light and kink protection.
- With light and kink protection.
- PCS
- 2
- FEP tubing / M6 / 150 cm
- 6.1805.030
- With light and kink protection
- With light and kink protection
- PCS
- 2
- T connector / M6 inner
- 6.1808.060
- 3 M6 inner threads.
- <p>3 M6 inner threads.</p>
- PCS
- 1
- 807 Dosing Unit ポート 4 アダプター、M6 内側
- 6.1808.280
- FEP チューブ / M6 との接続のため、807 Dosing Unit のポート 4 に使用するアダプター。
- <p>FEP チューブ / M6 との接続のため、807 Dosing Unit のポート 4 に使用するアダプター。</p>
- PCS
- 1
- Silicone tubing 6 mm i.d. / 2 m
- 6.1816.080
- Drainage tubing to the "Waste Collector".
- <p>Drainage tubing to the "Waste Collector".</p>
- PCS
- 2
- FEP aspiration tubing to 2 L bottle
- 6.1819.100
- Aspiration tubing to bottle attachment with M6 connector. For the production of eluents.
- <p>Aspiration tubing to bottle attachment with M6 connector. For the production of eluents.</p>
- PCS
- 2
- PEEK sample loop 250 µL
- 6.1825.290
- Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.
- <p>Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.</p>
- PCS
- 1
- PharMed® pump tubing (orange/yellow), 3-stopper
- 6.1826.420
- For MSM regeneration with peristaltic pump.
- <p>For MSM regeneration with peristaltic pump.</p>
- PCS
- 1
- PEEK capillary 0.5 mm i.d., 15 cm
- 6.1831.040
- For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
- For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
- PCS
- 1
- Clip for SGJ 14/15
- 6.2023.020
- Clip for SGJ 14/16
- Clip for SGJ 14/16
- PCS
- 2
- Dosino holder for the Absorber Module
- 6.2057.230
- Holder for fastening Dosinos to the Absorber Module.
- <p>Holder for fastening Dosinos to the Absorber Module.</p>
- PCS
- 2
- Cable USB A - USB B 1.8 m
- 6.2151.020
- USB connecting cable
- USB connecting cable
- PCS
- 1
- Colored sleeves for capillaries
- 6.2251.000
- Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
- Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
- PCS
- 1
- Absorber tube to the Absorber Module
- 6.2421.000
- Absorber tube for the absorption of the combustion gases from the Combustion Module.
- <p>Absorber tube for the absorption of the combustion gases from the Combustion Module. </p>
- PCS
- 1
- キャピラリーカッター
- 6.2621.080
- カッターツール、合成樹脂製キャピラリーの簡単な切断用、1/16"および 1/8"、交換刃 5 枚込み。
- <p>カッターツール、合成樹脂製キャピラリーの簡単な切断用、1/16"および 1/8"、交換刃 5 枚込み。</p>
- PCS
- 1
- Pressure screw 5x
- 6.2744.010
- With UNF 10/32 connection. For the connection of PEEK capillaries
- With UNF 10/32 connection. For the connection of PEEK capillaries
- PCS
- 3
- Pressure screw 2x
- 6.2744.014
- With UNF 10/32 connection. For the connection of PEEK capillaries
- With UNF 10/32 connection. For the connection of PEEK capillaries
- PCS
- 1
- カップリング チューブニップル/UNF 10/32、2個
- 6.2744.034
- 圧力調整ネジとポンプチューブを接続。2個。ペリスタリックポンプ付きIC装置用。
- <p>圧力調整ネジとポンプチューブを接続。2個。ペリスタリックポンプ付きIC装置用。</p>
- PCS
- 1
- M6 thread / UNF 10/32 adapter
- 6.2744.080
- With M6 outer thread. For IC instruments.
- <p>With M6 outer thread. For IC instruments.</p>
- PCS
- 3
- Pressure screw long
- 6.2744.090
- Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
- Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
- PCS
- 4
- Pressure screw PEEK UNF 1/4-28, 3 pieces
- 6.2744.170
- Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
- Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
- PCS
- 1
- Pump tubing connector with security lock and filter
- 6.2744.180
- For the connection of a pump tubing and a capillary with built-in filter
- For the connection of a pump tubing and a capillary with built-in filter
- PCS
- 1
- Adapter UNF 10/32 outer / M6 inner
- 6.2744.200
- Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
- Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
- PCS
- 1
- Screw stopper 10/32 long
- 6.2744.220
- For Professional IC Instruments. For sealing unused ports of degassers and MCS.
- For Professional IC Instruments. For sealing unused ports of degassers and MCS.
- PCS
- 8
- PEEK pressure screw 14 mm, 3 pcs.
- 6.2744.350
- With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.
- <p>With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.</p>
- PCS
- 2
- Holder for absorber tubing
- 6.2766.000
- Holder for fastening the absorber tubing in the Absorber Module.
- <p>Holder for fastening the absorber tubing in the Absorber Module.</p>
- PCS
- 1
- Holder for inlet valve
- 6.2766.010
- Holder for inlet valve to the Absorber Module.
- <p>Holder for inlet valve to the Absorber Module.</p>
- PCS
- 1
- インレットバルブ PEEK
- 6.2824.170
- 装置 940、930、925、883、882、881、850 の IC ポンプヘッドインレット側用のメタルフリーのチェックバルブです。
- <p>装置 940、930、925、883、882、881、850 の IC ポンプヘッドインレット側用のメタルフリーのチェックバルブです。</p>
- PCS
- 1
- MSM Rotor A
- 6.2832.000
- Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
- Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
- PCS
- 1
- アダプタスリーブ、MSM
- 6.2842.020
- アダプタスリーブを用いれば、MSM Rotor A と MSM-LC Rotor A のいずれも、ローターハウジングに取り付けることができます。
- <p>アダプタスリーブを用いれば、MSM Rotor A と MSM-LC Rotor A のいずれも、ローターハウジングに取り付けることができます。</p>
- PCS
- 1
- 807 Dosing Unit 5 mL
- 6.3032.150
- 807 Dosing Unit、5 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、5 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- 807 Dosing Unit 10 mL
- 6.3032.210
- 807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- Accessory kit: Vario/Flex Basic
- 6.5000.000
- Basic set of accessories for a Professional IC Vario or Compact IC Flex.
- <p>Basic set of accessories for a Professional IC Vario or Compact IC Flex.</p>
- PCS
- 1
- Accessory kit: Vario/Flex ONE
- 6.5000.010
- Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.
- <p>Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.</p>
- PCS
- 1
- Accessory kit: Vario/Flex SeS
- 6.5000.020
- Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.
- <p>Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.</p>
- PCS
- 1
-
- Combustion Oven (TEI)
- 1.0136.0600
- PCS
- 1
- 800 Dosino (Kabellänge 0.65 m)
- 1.800.0040
- Antrieb mit Schreib-/Lesehardware für intelligente Dosiereinheiten. Mit fest montiertem Kabel (Länge 0.65 m).
- <p>Antrieb mit Schreib-/Lesehardware für intelligente Dosiereinheiten. Mit fest montiertem Kabel (Länge 0.65 m).</p>
- PCS
- 2
- IC Conductivity Detector
- 1.850.9010
- インテリジェントIC装置のためのコンパクトかつインテリジェントな高出力電気伝導度検出器。 優れた温度安定性、保護された検出器ブロック内の総合的な信号処理、最新版のDSP (Digital Signal Processing) が高精度の測定を保証します。稼動範囲がダイナミックなので測定範囲の変更は(自動のものも含めて)必要ありません。
- <p>インテリジェントIC装置のためのコンパクトかつインテリジェントな高出力電気伝導度検出器。 優れた温度安定性、保護された検出器ブロック内の総合的な信号処理、最新版のDSP (Digital Signal Processing) が高精度の測定を保証します。稼動範囲がダイナミックなので測定範囲の変更は(自動のものも含めて)必要ありません。</p>
- PCS
- 1
- 920 Absorber Module
- 1.920.0010
- 920 吸収モジュールは燃焼モジュールをイオンクロマトグラフと繋げます。920 吸収モジュールは、分析物の気体状の化合物を分解しICへ転送します。このモジュールはリキッドハンドリング全体を担当します。このモジュールは燃焼法ICの他、ガス分析にも使用することができます。
- <p>920 吸収モジュールは燃焼モジュールをイオンクロマトグラフと繋げます。920 吸収モジュールは、分析物の気体状の化合物を分解しICへ転送します。このモジュールはリキッドハンドリング全体を担当します。このモジュールは燃焼法ICの他、ガス分析にも使用することができます。</p>
- PCS
- 1
- 930 Compact IC Flex Oven/SeS/PP/Deg
- 1.930.2560
- 930 コンパクト IC Flex Oven/SeS/PP/Deg はカラムオーブン、連続サプレッション、サプレッサー再生のためのペリスタリックポンプ、内蔵式脱気装置を備えたインテリジェントコンパクトIC装置です。この装置は任意の分離メソッドおよび検出メソッドによって使用することができます。典型的な使用領域:- 連続サプレッションおよび電気伝導度検出器による陰イオンの測定
- <p>930 コンパクト IC Flex Oven/SeS/PP/Deg は<strong>カラムオーブン</strong>、<strong>連続サプレッション</strong>、サプレッサー再生のための<strong>ペリスタリックポンプ</strong>、内蔵式<strong>脱気装置</strong>を備えたインテリジェントコンパクトIC装置です。この装置は任意の分離メソッドおよび検出メソッドによって使用することができます。</p> <p>典型的な使用領域:</p> <p>- 連続サプレッションおよび電気伝導度検出器による陰イオンの測定</p>
- PCS
- 1
- Boat Introduction Module、石英
- 6.07311.010
- 石英燃焼チューブと共に使用する Combustion IC のための Boat Introduction Module。このモジュールにより、サンプルはサンプル用るつぼを用いて燃焼のためオーブンに移されます。サンプル用るつぼを取り扱うためのピンセットとペトリ皿も含まれています。
- <p>石英燃焼チューブと共に使用する Combustion IC のための Boat Introduction Module。このモジュールにより、サンプルはサンプル用るつぼを用いて燃焼のためオーブンに移されます。<br/>サンプル用るつぼを取り扱うためのピンセットとペトリ皿も含まれています。</p>
- PCS
- 1
- 石英燃焼チューブ (TEI)
- 6.07311.100
- Combustion Oven のための石英燃焼チューブ (TEI)。
- <p>Combustion Oven のための石英燃焼チューブ (TEI)。</p>
- PCS
- 1
- Metrosep A PCC 2 HC/4.0
- 6.1006.340
- 陰イオン濃縮ならびにマトリックス除去用です。 充填ベッドの拡大は、PEEK 製両濃縮カラムの容量を増大します。 特にマトリックス効果が濃縮カラムの過負荷となる場合、あるいはサンプルを高度のイオン強度で解析するべき場合に、大きな容量が必要となります。
- <p>陰イオン濃縮ならびにマトリックス除去用です。 充填ベッドの拡大は、PEEK 製両濃縮カラムの容量を増大します。 特にマトリックス効果が濃縮カラムの過負荷となる場合、あるいはサンプルを高度のイオン強度で解析するべき場合に、大きな容量が必要となります。</p>
- PCS
- 1
- Metrosep A Trap 1 - 100/4.0
- 6.1014.000
- 溶離液流の洗浄のために用いられる大容量の陰イオンカラム。試薬の品質が「Ultrapur」や「puriss」などの最高レベルであっても、ごくわずかな陰イオンの汚れが混入している場合があります。これらはMetrosep A Trap 1 - 100/4.0によって確実に取り除くことができます。このカラムは、特にグラジェントアプリケーションにて使用されます。
- <p>溶離液流の洗浄のために用いられる大容量の陰イオンカラム。試薬の品質が「Ultrapur」や「puriss」などの最高レベルであっても、ごくわずかな陰イオンの汚れが混入している場合があります。これらはMetrosep A Trap 1 - 100/4.0によって確実に取り除くことができます。</p><p>このカラムは、特にグラジェントアプリケーションにて使用されます。</p>
- PCS
- 1
- Metrosep I Trap 1 - 100/4.0
- 6.1014.200
- Metrosep I Trap 1 - 100/4.0 カラムは、水溶液中のイオン性、すなわち陽イオンおよび陰イオン性の汚染を除去するのに使用されます。特に「MISP」、すなわち「メトロームインラインサンプル前処理」の一環における給送水の洗浄において、その使用が推奨されます。Metrosep I Trap 1 - 100/4.0 カラムの使用により、システムブランクへの給送水の影響を大きく抑制することができます。
- <p>Metrosep I Trap 1 - 100/4.0 カラムは、水溶液中のイオン性、すなわち陽イオンおよび陰イオン性の汚染を除去するのに使用されます。特に「MISP」、すなわち「メトロームインラインサンプル前処理」の一環における給送水の洗浄において、その使用が推奨されます。Metrosep I Trap 1 - 100/4.0 カラムの使用により、システムブランクへの給送水の影響を大きく抑制することができます。</p>
- PCS
- 1
- エキストラクターロッド
- 6.1546.030
- 807 Dosing Units または シリンダーユニット OMNIS のピストン用。
- <p>807 Dosing Units または シリンダーユニット OMNIS のピストン用。</p>
- PCS
- 2
- Bottle attachment / GL 45 - 3 x UNF 10/32
- 6.1602.150
- For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.
- <p>For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.</p>
- PCS
- 1
- 溶離液および試薬のためのボトルキャップGL 45
- 6.1602.160
- 溶離液ボトル、試薬ボトルおよび洗浄ボトル用、乾燥管および吸引チューブ用コネクタ付き。
- <p>溶離液ボトル、試薬ボトルおよび洗浄ボトル用、乾燥管および吸引チューブ用コネクタ付き。</p>
- PCS
- 2
- Drying bottle / 100 mL / GL 45
- 6.1608.050
- PCS
- 1
- Eluent bottle / 2 L / GL 45
- 6.1608.070
- PCS
- 2
- Adsorbing tube, large and bent
- 6.1609.000
- For filling with adsorber material.
- For filling with adsorber material.
- PCS
- 2
- Thread adapter S 40 to GL 45
- 6.1618.020
- Adapter for bottles with S40 thread (Merck...) to GL45.
- Adapter for bottles with S40 thread (Merck...) to GL45.
- PCS
- 2
- PTFE capillary 0.5 mm i.d. / 3 m
- 6.1803.030
- Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
- Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
- PCS
- 3
- PTFE 製キャピラリー 0.75 mm 内径 / 3 m
- 6.1803.160
- 920 Absorber Module で使用するための PTFE 製キャピラリー。
- <p>920 Absorber Module で使用するための PTFE 製キャピラリー。</p>
- PCS
- 4
- FEP tubing / M6 / 13 cm
- 6.1805.010
- With light and kink protection.
- With light and kink protection.
- PCS
- 2
- FEP tubing / M6 / 150 cm
- 6.1805.030
- With light and kink protection
- With light and kink protection
- PCS
- 2
- T connector / M6 inner
- 6.1808.060
- 3 M6 inner threads.
- <p>3 M6 inner threads.</p>
- PCS
- 1
- 807 Dosing Unit ポート 4 アダプター、M6 内側
- 6.1808.280
- FEP チューブ / M6 との接続のため、807 Dosing Unit のポート 4 に使用するアダプター。
- <p>FEP チューブ / M6 との接続のため、807 Dosing Unit のポート 4 に使用するアダプター。</p>
- PCS
- 1
- Silicone tubing 6 mm i.d. / 2 m
- 6.1816.080
- Drainage tubing to the "Waste Collector".
- <p>Drainage tubing to the "Waste Collector".</p>
- PCS
- 2
- FEP aspiration tubing to 2 L bottle
- 6.1819.100
- Aspiration tubing to bottle attachment with M6 connector. For the production of eluents.
- <p>Aspiration tubing to bottle attachment with M6 connector. For the production of eluents.</p>
- PCS
- 2
- PEEK sample loop 250 µL
- 6.1825.290
- Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.
- <p>Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.</p>
- PCS
- 1
- PharMed® pump tubing (orange/yellow), 3-stopper
- 6.1826.420
- For MSM regeneration with peristaltic pump.
- <p>For MSM regeneration with peristaltic pump.</p>
- PCS
- 1
- PEEK capillary 0.5 mm i.d., 15 cm
- 6.1831.040
- For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
- For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
- PCS
- 1
- Clip for SGJ 14/15
- 6.2023.020
- Clip for SGJ 14/16
- Clip for SGJ 14/16
- PCS
- 2
- Dosino holder for the Absorber Module
- 6.2057.230
- Holder for fastening Dosinos to the Absorber Module.
- <p>Holder for fastening Dosinos to the Absorber Module.</p>
- PCS
- 2
- Cable USB A - USB B 1.8 m
- 6.2151.020
- USB connecting cable
- USB connecting cable
- PCS
- 1
- Colored sleeves for capillaries
- 6.2251.000
- Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
- Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
- PCS
- 1
- Absorber tube to the Absorber Module
- 6.2421.000
- Absorber tube for the absorption of the combustion gases from the Combustion Module.
- <p>Absorber tube for the absorption of the combustion gases from the Combustion Module. </p>
- PCS
- 1
- キャピラリーカッター
- 6.2621.080
- カッターツール、合成樹脂製キャピラリーの簡単な切断用、1/16"および 1/8"、交換刃 5 枚込み。
- <p>カッターツール、合成樹脂製キャピラリーの簡単な切断用、1/16"および 1/8"、交換刃 5 枚込み。</p>
- PCS
- 1
- Pressure screw 5x
- 6.2744.010
- With UNF 10/32 connection. For the connection of PEEK capillaries
- With UNF 10/32 connection. For the connection of PEEK capillaries
- PCS
- 3
- Pressure screw 2x
- 6.2744.014
- With UNF 10/32 connection. For the connection of PEEK capillaries
- With UNF 10/32 connection. For the connection of PEEK capillaries
- PCS
- 1
- カップリング チューブニップル/UNF 10/32、2個
- 6.2744.034
- 圧力調整ネジとポンプチューブを接続。2個。ペリスタリックポンプ付きIC装置用。
- <p>圧力調整ネジとポンプチューブを接続。2個。ペリスタリックポンプ付きIC装置用。</p>
- PCS
- 1
- M6 thread / UNF 10/32 adapter
- 6.2744.080
- With M6 outer thread. For IC instruments.
- <p>With M6 outer thread. For IC instruments.</p>
- PCS
- 3
- Pressure screw long
- 6.2744.090
- Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
- Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
- PCS
- 4
- Pressure screw PEEK UNF 1/4-28, 3 pieces
- 6.2744.170
- Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
- Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
- PCS
- 1
- Pump tubing connector with security lock and filter
- 6.2744.180
- For the connection of a pump tubing and a capillary with built-in filter
- For the connection of a pump tubing and a capillary with built-in filter
- PCS
- 1
- Adapter UNF 10/32 outer / M6 inner
- 6.2744.200
- Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
- Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
- PCS
- 1
- Screw stopper 10/32 long
- 6.2744.220
- For Professional IC Instruments. For sealing unused ports of degassers and MCS.
- For Professional IC Instruments. For sealing unused ports of degassers and MCS.
- PCS
- 8
- PEEK pressure screw 14 mm, 3 pcs.
- 6.2744.350
- With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.
- <p>With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.</p>
- PCS
- 2
- Holder for absorber tubing
- 6.2766.000
- Holder for fastening the absorber tubing in the Absorber Module.
- <p>Holder for fastening the absorber tubing in the Absorber Module.</p>
- PCS
- 1
- Holder for inlet valve
- 6.2766.010
- Holder for inlet valve to the Absorber Module.
- <p>Holder for inlet valve to the Absorber Module.</p>
- PCS
- 1
- インレットバルブ PEEK
- 6.2824.170
- 装置 940、930、925、883、882、881、850 の IC ポンプヘッドインレット側用のメタルフリーのチェックバルブです。
- <p>装置 940、930、925、883、882、881、850 の IC ポンプヘッドインレット側用のメタルフリーのチェックバルブです。</p>
- PCS
- 1
- MSM Rotor A
- 6.2832.000
- Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
- Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
- PCS
- 1
- アダプタスリーブ、MSM
- 6.2842.020
- アダプタスリーブを用いれば、MSM Rotor A と MSM-LC Rotor A のいずれも、ローターハウジングに取り付けることができます。
- <p>アダプタスリーブを用いれば、MSM Rotor A と MSM-LC Rotor A のいずれも、ローターハウジングに取り付けることができます。</p>
- PCS
- 1
- 807 Dosing Unit 5 mL
- 6.3032.150
- 807 Dosing Unit、5 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、5 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- 807 Dosing Unit 10 mL
- 6.3032.210
- 807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- Accessory kit: Vario/Flex Basic
- 6.5000.000
- Basic set of accessories for a Professional IC Vario or Compact IC Flex.
- <p>Basic set of accessories for a Professional IC Vario or Compact IC Flex.</p>
- PCS
- 1
- Accessory kit: Vario/Flex ONE
- 6.5000.010
- Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.
- <p>Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.</p>
- PCS
- 1
- Accessory kit: Vario/Flex SeS
- 6.5000.020
- Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.
- <p>Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.</p>
- PCS
- 1
-
- 948 Continuous IC Module, CEP
- 2.948.0010
- 948 Continuous IC Module を使って水酸化溶離液を自動で生成できます。グラジェントだけでなく、アイソクラティック溶離液の製造も可能です。948 Continuous IC Module, CEP は以下のコンポーネントで構成されています:948 Continuous IC Module; Eluent Producer Cartridge (EPC、6.02850.200); 連続陰イオントラップ (CT、6.02850.100); 高圧デガッサー (H-DEG、6.02850.000); メソッド例ハンドブック 948 Continuous IC Module に従う。
- <p>948 Continuous IC Module を使って水酸化溶離液を自動で生成できます。グラジェントだけでなく、アイソクラティック溶離液の製造も可能です。<br />948 Continuous IC Module, CEP は以下のコンポーネントで構成されています:</p><ul><li>948 Continuous IC Module</li><li>Eluent Producer Cartridge (EPC、6.02850.200)</li><li>連続陰イオントラップ (CT、6.02850.100)</li><li>高圧デガッサー (H-DEG、6.02850.000)</li></ul><p><a href="http://www.metrohm.com/content/dam/metrohm/shared/method-files/Example_methods_948.zip">メソッド例</a>ハンドブック 948 Continuous IC Module に従う。<br /> </p>
- PCS
- 1
- Boat Introduction Module、セラミック
- 6.07311.020
- セラミック燃焼チューブと共に使用する Combustion IC のための Boat Introduction Module。このモジュールにより、サンプルはサンプル用るつぼを用いて燃焼のためオーブンに移されます。サンプル用るつぼを取り扱うためのピンセットとペトリ皿も含まれています。
- <p>セラミック燃焼チューブと共に使用する Combustion IC のための Boat Introduction Module。このモジュールにより、サンプルはサンプル用るつぼを用いて燃焼のためオーブンに移されます。<br/>サンプル用るつぼを取り扱うためのピンセットとペトリ皿も含まれています。</p>
- PCS
- 1
- Liquid Introduction Module、自動(TEI)
- 6.07311.040
- Liquid Introduction Module により、Liquid Autosampler CIC によるサンプルの直接注入を用いた液体サンプルの燃焼が可能となります。このモジュールは、沸点が 420 °C 未満のサンプルに使用することができます。さらに、このモジュールにより気体サンプルまたは LPG サンプルを GLS Sampler CIC からオーブンに導くこともできます。
- <p>Liquid Introduction Module により、Liquid Autosampler CIC によるサンプルの直接注入を用いた液体サンプルの燃焼が可能となります。このモジュールは、沸点が 420 °C 未満のサンプルに使用することができます。<br/>さらに、このモジュールにより気体サンプルまたは LPG サンプルを GLS Sampler CIC からオーブンに導くこともできます。</p>
- PCS
- 1
- サンプル用るつぼ、石英、pk=30
- 6.07311.210
- Metrohm Combustion IC (TEI) におけるサンプル注入のための石英製サンプル用るつぼ、30 個。
- <p>Metrohm Combustion IC (TEI) におけるサンプル注入のための石英製サンプル用るつぼ、30 個。</p>
- PCS
- 1
- MSM-HC Rotor A、水酸化物
- 6.2842.100
- MSM-HC (高キャパシティ Metrohm サプレッサーモジュール) を有するすべての IC 装置のための水酸化物溶離液用高キャパシティのサプレッサーローター。
- <p>MSM-HC (高キャパシティ Metrohm サプレッサーモジュール) を有するすべての IC 装置のための水酸化物溶離液用高キャパシティのサプレッサーローター。</p>
- PCS
- 1
- MagIC Net 4.x CompactからMagIC Net 4.x Professionalへのアップグレード: 1ライセンス
- 6.6059.406
- MagIC Net CompactからMagIC Net Professionalへのプログラム拡張。
- <p>MagIC Net CompactからMagIC Net Professionalへのプログラム拡張。</p>
- PCS
- 1
- MagIC Net 4.x CompactからMagIC Net 4.x Multiへのアップグレード: 3ライセンス
- 6.6059.407
- MagIC Net CompactからMagIC Net Multiへのプログラム拡張。
- <p>MagIC Net CompactからMagIC Net Multiへのプログラム拡張。</p>
- PCS
- 1
- MagIC Net 4.2 Compact: 1ライセンス
- 6.6059.421
- Metrohm のインテリジェントな Compact IC 装置、検出器、オートサンプラーあるいは 771 Compact Interface のコントロール用のプロフェッショナルなクロマトグラフィーソフトウェア。このソフトウェアにより、イオンクロマトグラフィー分析のチェック、データ取得・評価・モニタリングならびにレポート作成が可能。ルーチンオペレーションのためのグラフィック ユーザーインターフェース、広範なデータベース プログラム、メソッド開発、コンフィグレーションならびに手動のシステム制御; 非常にフレキシブルなユーザー管理、高性能なデータベース オペレーション、広範なデータエクスポート機能、独自設定可能なレポート作成機能、全システム コンポーネントおよびクロマトグラフィー結果のコントロールおよびモニタリング。MagIC Net Compact は FDA 規定 21 CFR パート 11 および GLP に完全に準拠。MagIC Net は 15 のダイアログ言語で使用可能です: ドイツ語、英語、中国語 (繁体、簡体)、フランス語、イタリア語、スペイン語、ポルトガル語、ブルガリア語、チェコ語、ハンガリー語、日本語、韓国語、ロシア語、スロバキア語このバージョンではグラフィックユーザーインターフェースが新しくなり、4K モニターでのスケーリングやユーザーインターフェースの鮮明さ等が向上しました。1 ライセンス。インストールファイルと文書は 1 つの USB スティックに保存され、納品されます。
- <p>Metrohm のインテリジェントな Compact IC 装置、検出器、オートサンプラーあるいは 771 Compact Interface のコントロール用のプロフェッショナルなクロマトグラフィーソフトウェア。このソフトウェアにより、イオンクロマトグラフィー分析のチェック、データ取得・評価・モニタリングならびにレポート作成が可能。</p><p>ルーチンオペレーションのためのグラフィック ユーザーインターフェース、広範なデータベース プログラム、メソッド開発、コンフィグレーションならびに手動のシステム制御; 非常にフレキシブルなユーザー管理、高性能なデータベース オペレーション、広範なデータエクスポート機能、独自設定可能なレポート作成機能、全システム コンポーネントおよびクロマトグラフィー結果のコントロールおよびモニタリング。</p><p>MagIC Net Compact は FDA 規定 21 CFR パート 11 および GLP に完全に準拠。</p><p>MagIC Net は 15 のダイアログ言語で使用可能です: ドイツ語、英語、中国語 (繁体、簡体)、フランス語、イタリア語、スペイン語、ポルトガル語、ブルガリア語、チェコ語、ハンガリー語、日本語、韓国語、ロシア語、スロバキア語</p><p>このバージョンではグラフィックユーザーインターフェースが新しくなり、4K モニターでのスケーリングやユーザーインターフェースの鮮明さ等が向上しました。</p><p>1 ライセンス。</p><p>インストールファイルと文書は 1 つの USB スティックに保存され、納品されます。</p>
- PCS
- 1
- MagIC Net 4.2 Professional: 1ライセンス
- 6.6059.422
- すべてのインテリジェントな Professional IC システム、コンパクトな IC 装置とそれらの周辺機器、すべての検出器と様々なオートサンプラー、800 Dosino、771 Compact Interface などのコントロールのためのプロフェッショナルな Metrohm クロマトグラフィーソフトウェア。このソフトウェアにより、イオンクロマトグラフィー分析のチェック、データ取得、評価・モニタリングとレポートの作成が可能となります。ルーチンオペレーションのためのグラフィック ユーザーインターフェース、広範なデータベース プログラム、メソッド開発、コンフィグレーションならびに手動のシステム制御; 非常にフレキシブルなユーザー管理、高性能なデータベース オペレーション、広範なデータエクスポート機能、独自設定可能なレポート作成機能、全システム コンポーネントおよびクロマトグラフィー結果のコントロールおよびモニタリング。MagIC Net Professional は FDA 規定21 CFR Part 11 および GLP に完全に準拠しています。MagIC Net は 15 のダイアログ言語で使用可能です: ドイツ語、英語、中国語 (繁体、簡体)、フランス語、イタリア語、スペイン語、ポルトガル語、ブルガリア語、チェコ語、ハンガリー語、日本語、韓国語、ロシア語、スロバキア語このバージョンではグラフィックユーザーインターフェースが新しくなり、4K モニターでのスケーリングやユーザーインターフェースの鮮明さ等が向上しました。1ライセンスインストールファイルと文書は 1 つの USB スティックに保存され、納品されます。
- <p>すべてのインテリジェントな Professional IC システム、コンパクトな IC 装置とそれらの周辺機器、すべての検出器と様々なオートサンプラー、800 Dosino、771 Compact Interface などのコントロールのためのプロフェッショナルな Metrohm クロマトグラフィーソフトウェア。このソフトウェアにより、イオンクロマトグラフィー分析のチェック、データ取得、評価・モニタリングとレポートの作成が可能となります。</p><p>ルーチンオペレーションのためのグラフィック ユーザーインターフェース、広範なデータベース プログラム、メソッド開発、コンフィグレーションならびに手動のシステム制御; 非常にフレキシブルなユーザー管理、高性能なデータベース オペレーション、広範なデータエクスポート機能、独自設定可能なレポート作成機能、全システム コンポーネントおよびクロマトグラフィー結果のコントロールおよびモニタリング。</p><p>MagIC Net Professional は FDA 規定21 CFR Part 11 および GLP に完全に準拠しています。</p><p>MagIC Net は 15 のダイアログ言語で使用可能です: ドイツ語、英語、中国語 (繁体、簡体)、フランス語、イタリア語、スペイン語、ポルトガル語、ブルガリア語、チェコ語、ハンガリー語、日本語、韓国語、ロシア語、スロバキア語</p><p>このバージョンではグラフィックユーザーインターフェースが新しくなり、4K モニターでのスケーリングやユーザーインターフェースの鮮明さ等が向上しました。</p><p>1ライセンス</p><p>インストールファイルと文書は 1 つの USB スティックに保存され、納品されます。</p>
- PCS
- 1
- MagIC Net 4.2 Multi: 3 ライセンス
- 6.6059.423
- すべてのインテリジェントな Professional IC システム、コンパクトな IC 装置とそれらの周辺機器、すべての検出器と様々なオートサンプラー、800 Dosino、771 Compact Interface などのコントロールのためのクライアント/サーバーに対応可能な Metrohm クロマトグラフィーソフトウェア。このソフトウェアにより、イオンクロマトグラフィー分析のチェック、データ取得、評価・モニタリングとレポートの作成が可能となります。データとメソッドは一元的に保存されます。ルーチンオペレーションのためのグラフィック ユーザーインターフェース、広範なデータベース プログラム、メソッド開発、コンフィグレーションならびに手動のシステム制御; 非常にフレキシブルなユーザー管理、高性能なデータベース オペレーション、広範なデータエクスポート機能、独自設定可能なレポート作成機能、全システム コンポーネントおよびクロマトグラフィー結果のコントロールおよびモニタリング。MagIC Net Multi は FDA 規定21 CFR パート 11および GLP に完全に準拠しています。MagIC Net は 15 のダイアログ言語で使用可能です: ドイツ語、英語、中国語 (繁体、簡体)、フランス語、イタリア語、スペイン語、ポルトガル語、ブルガリア語、チェコ語、ハンガリー語、日本語、韓国語、ロシア語、スロバキア語このバージョンではグラフィックユーザーインターフェースが新しくなり、4K モニターでのスケーリングやユーザーインターフェースの鮮明さ等が向上しました。社外ネットワークのサーバーによるクライアントサーバーシステムのための性能が向上しました。3 つのライセンスを有するクライアント・サーバーバージョン
- <p>すべてのインテリジェントな Professional IC システム、コンパクトな IC 装置とそれらの周辺機器、すべての検出器と様々なオートサンプラー、800 Dosino、771 Compact Interface などのコントロールのためのクライアント/サーバーに対応可能な Metrohm クロマトグラフィーソフトウェア。<br/>このソフトウェアにより、イオンクロマトグラフィー分析のチェック、データ取得、評価・モニタリングとレポートの作成が可能となります。<br/>データとメソッドは一元的に保存されます。<br/> <br/>ルーチンオペレーションのためのグラフィック ユーザーインターフェース、広範なデータベース プログラム、メソッド開発、コンフィグレーションならびに手動のシステム制御; 非常にフレキシブルなユーザー管理、高性能なデータベース オペレーション、広範なデータエクスポート機能、独自設定可能なレポート作成機能、全システム コンポーネントおよびクロマトグラフィー結果のコントロールおよびモニタリング。</p><p>MagIC Net Multi は FDA 規定21 CFR パート 11および GLP に完全に準拠しています。</p><p>MagIC Net は 15 のダイアログ言語で使用可能です: ドイツ語、英語、中国語 (繁体、簡体)、フランス語、イタリア語、スペイン語、ポルトガル語、ブルガリア語、チェコ語、ハンガリー語、日本語、韓国語、ロシア語、スロバキア語</p><p>このバージョンではグラフィックユーザーインターフェースが新しくなり、4K モニターでのスケーリングやユーザーインターフェースの鮮明さ等が向上しました。<br/>社外ネットワークのサーバーによるクライアントサーバーシステムのための性能が向上しました。</p><p>3 つのライセンスを有するクライアント・サーバーバージョン</p>
- PCS
- 1