電気伝導度測定セル c = 0.1cm-1Pt1000付き (固定式ケーブル)
6.0916.040
電気伝導度測定セル c = 0.1cm-1Pt1000付き (固定式ケーブル)
ja
6.0916.040
特長
セル定数c = 0.1 cm-1 (指針値) のステンレス製電気伝導度測定セル、内蔵Pt1000温度センサーおよび856 Conductivity Moduleとの接続のための固定式ケーブル (1.2 m) 付き。
このセンサーは、脱イオン水などでの低い電気伝導度 (0 から 300 µS/cm) の測定、またはUSP 645>に則した測定に適しています。
技術仕様
| SGJ sleeve | すり合わせ 14/15 |
|---|---|
| Shaft material | Stainless steel 18/13 |
| Measuring range (theoretical) | 0.1...300 |
| Measuring unit | uS/cm |
| Temperature range, long-term (°C) | 0...70 |
| Temperature range, short-term (°C) | 0...70 |
| Max. installation length (mm) | 125 |
| Shaft diameter top (mm) | 12 |
| Shaft diameter bottom (mm) | 12 |
| Min. immersion depth (mm) | 35 |
| Electrode plug-in head | 固定电缆，插头 N |
| Temperature sensor | Pt1000 |
| Type | Stainless steel |
| Cell constant, guide value (1/cm) | 0.1 |
-
- Sleeve with SGJ 14/12 mm
- 6.1236.050
- Sleeve with SGJ 14/12 mm, polyethylene.
- Sleeve with SGJ 14/12 mm, polyethylene.
- PCS
- 1
-
- Sleeve with SGJ 14/12 mm
- 6.1236.050
- Sleeve with SGJ 14/12 mm, polyethylene.
- Sleeve with SGJ 14/12 mm, polyethylene.
- PCS
- 1
-
- Flow-through measuring vessel
- 6.1420.100
- For 12 mm dia. electrodes (pH, metal, conductivity)
- For 12 mm dia. electrodes (pH, metal, conductivity)
- PCS
- 1
- Conductivity standard 100 µS/cm, 5 x 30 mL
- 6.2324.110
- Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
- Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
- PCS
- 1
- Conductivity standard 100 µS/cm 250 mL
- 6.2324.010
- Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
- Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
- PCS
- 1