電気伝導度測定セル c = 0.5 cm-1Pt1000付き (固定式ケーブル、0.65 m)

6.00923.080

6.00923.080

セル定数c = 0.5 cm^-1(指針値) の4極式電気伝導度測定セル、内蔵型Pt1000温度センサーおよびOMNIS Measuring Module Conductivityとの接続のための固定式ケーブル (0.65 m) 付き。

頑丈かつ耐破損性に優れたPEEK製のプラスチックシャフトにより、このセンサーは機械的に非常に耐性が高く、以下の液体などにおける中程度の電気伝導度 (15 µS/cm から 250 mS/cm) の測定に適しています:

Shaft material	PEEK
測定レンジ（理論値）	0.01...200
Measuring unit	mS/cm
Temperature range, long-term (°C)	0...70
Temperature range, short-term (°C)	0...70
Max. installation length (mm)	125
SGJ sleeve	フレキシブルな摺り接手
Shaft diameter top (mm)	12
Shaft diameter bottom (mm)	12
Min. immersion depth (mm)	30
Electrode plug-in head	Fixed cable, plug N
Temperature sensor	Pt1000
Type	4-wire, Pt
セル定数、指針値 (1/cm)	0.5

- Sleeve with SGJ 14/12 mm
- 6.1236.050
- Sleeve with SGJ 14/12 mm, polyethylene.
- PCS
- 1
- Sleeve with SGJ 14/12 mm
- 6.1236.050
- Sleeve with SGJ 14/12 mm, polyethylene.
- PCS
- 1
- 測定モジュール電気伝導度
- 6.02101.020
- Measurement channel for one OMNIS Titrator or Titration Module for the connection of conductivity measuring cells.
- PCS
- 1
- KCl ion standard 250 mL
- 6.2301.060
- KCl ion standard (c(ion) = 0.1000 +/-0.0005 mol/L), can also be used as standard solution for conductometry 12.87 mS/cm (25 °C).
- PCS
- 1
- Conductivity standard 100 µS/cm 250 mL
- 6.2324.010
- Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
- PCS
- 1
- Conductivity standard 100 µS/cm, 5 x 30 mL
- 6.2324.110
- Conductivity standard for calibration of conductivity measuring cells with cell constant = 0.1/cm.
- PCS
- 1