You have been redirected to your local version of the requested page
Request quote
OMNIS Sample Robot L Pick&Place

OMNIS Sample Robot L Pick&Place

2.1012.1010

This product has been discontinued, but is still supported.
Go to replacement product
    • Sample beakers, plastic (PP), 120 mL, 20 pieces 
    • 6.01400.200
    • Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces. 
    • <p>Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces.<br/> </p>
    • PCS
    • 7
    • Titration head 3xNS14 / 4x6.4 mm (P&P)
    • 6.01403.030
    • Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing. 
    • <p>Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&amp;Place modules of the OMNIS Sample Robot Pick&amp;Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.</p><p> </p>
    • PCS
    • 1
    • Beaker adapter for OMNIS 120 mL sample beaker
    • 6.01404.030
    • Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&Place modules
    • <p>Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&amp;Place modules</p>
    • PCS
    • 2
    • Aspiration tip automation
    • 6.01543.100
    • Aspiration tip for automated OMNIS titrations.
    • <p>Aspiration tip for automated OMNIS titrations.</p>
    • PCS
    • 2
    • Silicone tubing 8/12 2.5 m
    • 6.01803.000
    • Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
    • <p>Silicone tubing for connecting to the drainage of the Pick&amp;Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.</p>
    • PCS
    • 2
    • Stirring propeller 20 mm ETFE
    • 6.01900.030
    • Stirring propeller, 20 mm, with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"
    • <p>Stirring propeller, 20 mm, with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"</p>
    • PCS
    • 1
    • Rack base
    • 6.02001.010
    • Rack base for extending the main modules to the OMNIS Sample Robot
    • <p>Rack base for extending the main modules to the OMNIS Sample Robot</p>
    • PCS
    • 2
    • Module base M/L
    • 6.02003.010
    • Module base for extending the main modules M and L to the OMNIS Sample Robot.
    • <p>Module base for extending the main modules M and L to the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • OMNIS sample rack, 16 x 120 mL, (PP)
    • 6.02041.030
    • OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.Plastic: Polypropylene (PP)
    • <p>OMNIS sample rack for OMNIS Sample Robot Pick&amp;Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.</p><p>Plastic: Polypropylene (PP)</p>
    • PCS
    • 7
    • Gripper fingers 43 - 65 mm
    • 6.02601.010
    • Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 43 to 65 mm.
    • <p>Gripper fingers for OMNIS Sample Robot Pick&amp;Place for gripping sample beakers with an outer diameter of 43 to 65 mm.</p>
    • PCS
    • 1
    • Cable cover for Sample Robot
    • 6.02706.000
    • The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.
    • <p>The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • "Peristaltic" (2-channel) pump module accessory set
    • 6.05001.010
    • The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.
    • <p>The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.</p>
    • PCS
    • 2
    • Container 10 L
    • 6.1621.000
    • As rinsing or waste container in automated systems.
    • As rinsing or waste container in automated systems.
    • PCS
    • 4
    • Cap for 10-L container
    • 6.1621.100
    • Cap for 10-L container. For easy and safe transportation of filled containers.
    • Cap for 10-L container. For easy and safe transportation of filled containers.
    • PCS
    • 4
    • Guiding sleeve
    • 6.2709.070
    • For fixation of buret and dosing tips in titration heads and electrode holders
    • For fixation of buret and dosing tips in titration heads and electrode holders
    • PCS
    • 2
    • Spray nozzle
    • 6.2740.020
    • For the fine-spraying of the rinsing solution.
    • <p>For the fine-spraying of the rinsing solution.</p>
    • PCS
    • 6
    • Rod Stirrer "Sample Robot"
    • 1.1006.0010
    • Rod stirrer with permanently mounted cable (2.5 m) for direct connection to the OMNIS Sample Robot.
    • <p>Rod stirrer with permanently mounted cable (2.5 m) for direct connection to the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • Main module Pick&Place L
    • 1.1012.0020
    • Main module for setting up an OMNIS Sample Robot Pick&Place in size L. This module is equipped with the main lift and one gripper. One module base and two rack bases are required to complete the setup. It must be equipped with sample racks, gripper fingers and workstations, e.g., Pick&Place module or a pump module in order to use it to set up a functioning Sample Robot. The selection of these components proceeds in accordance with the application.
    • <p>Main module for setting up an OMNIS Sample Robot Pick&amp;Place in size L. This module is equipped with the main lift and one gripper. One module base and two rack bases are required to complete the setup. It must be equipped with sample racks, gripper fingers and workstations, e.g., Pick&amp;Place module or a pump module in order to use it to set up a functioning Sample Robot. The selection of these components proceeds in accordance with the application.</p>
    • PCS
    • 1
    • Pick&Place module
    • 1.1014.0010
    • Module for installation in the module plate of the Pick&amp;Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&amp;Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.
    • <p>Module for installation in the module plate of the Pick&amp;Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&amp;Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.</p>
    • PCS
    • 1
    • Sample beakers, plastic (PP), 120 mL, 20 pieces 
    • 6.01400.200
    • Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces. 
    • <p>Sample beakers, plastic (polypropylene, PP), 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces.<br/> </p>
    • PCS
    • 7
    • Titration head 3xNS14 / 4x6.4 mm (P&P)
    • 6.01403.030
    • Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&Place modules of the OMNIS Sample Robot Pick&Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing. 
    • <p>Titration head with 3 NS14 and 4x 6.4 mm openings for using 120 mL beakers in Pick&amp;Place modules of the OMNIS Sample Robot Pick&amp;Place with two retracted dosing tips. Prepared for being equipped with rinsing and aspiration tubing.</p><p> </p>
    • PCS
    • 1
    • Beaker adapter for OMNIS 120 mL sample beaker
    • 6.01404.030
    • Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&Place modules
    • <p>Beaker adapter for centering the 120 mL sample beaker in the slide of the Pick&amp;Place modules</p>
    • PCS
    • 2
    • Aspiration tip automation
    • 6.01543.100
    • Aspiration tip for automated OMNIS titrations.
    • <p>Aspiration tip for automated OMNIS titrations.</p>
    • PCS
    • 2
    • Silicone tubing 8/12 2.5 m
    • 6.01803.000
    • Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
    • <p>Silicone tubing for connecting to the drainage of the Pick&amp;Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.</p>
    • PCS
    • 2
    • Stirring propeller 20 mm ETFE
    • 6.01900.030
    • Stirring propeller, 20 mm, with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"
    • <p>Stirring propeller, 20 mm, with adjustable height for use with Rod Stirrer "Titrator" or Rod Stirrer "Sample Robot"</p>
    • PCS
    • 1
    • Rack base
    • 6.02001.010
    • Rack base for extending the main modules to the OMNIS Sample Robot
    • <p>Rack base for extending the main modules to the OMNIS Sample Robot</p>
    • PCS
    • 2
    • Module base M/L
    • 6.02003.010
    • Module base for extending the main modules M and L to the OMNIS Sample Robot.
    • <p>Module base for extending the main modules M and L to the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • OMNIS sample rack, 16 x 120 mL, (PP)
    • 6.02041.030
    • OMNIS sample rack for OMNIS Sample Robot Pick&Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.Plastic: Polypropylene (PP)
    • <p>OMNIS sample rack for OMNIS Sample Robot Pick&amp;Place, suitable for 16 sample beakers. The following sample beakers can be used: 6.01400.200, 6.01400.300, 6.01400.303.</p><p>Plastic: Polypropylene (PP)</p>
    • PCS
    • 7
    • Gripper fingers 43 - 65 mm
    • 6.02601.010
    • Gripper fingers for OMNIS Sample Robot Pick&Place for gripping sample beakers with an outer diameter of 43 to 65 mm.
    • <p>Gripper fingers for OMNIS Sample Robot Pick&amp;Place for gripping sample beakers with an outer diameter of 43 to 65 mm.</p>
    • PCS
    • 1
    • Cable cover for Sample Robot
    • 6.02706.000
    • The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.
    • <p>The cable cover protects the MDL and Ethernet cables connectors on the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • "Peristaltic" (2-channel) pump module accessory set
    • 6.05001.010
    • The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.
    • <p>The accessory set contains all of the components required for the tube connections between a rinsing pump and an aspiration pump at the "Peristaltic" pump module. In addition to preassembled tubing with Luer connectors, each of these also includes two press clamps and pump tubing.</p>
    • PCS
    • 2
    • Container 10 L
    • 6.1621.000
    • As rinsing or waste container in automated systems.
    • As rinsing or waste container in automated systems.
    • PCS
    • 4
    • Cap for 10-L container
    • 6.1621.100
    • Cap for 10-L container. For easy and safe transportation of filled containers.
    • Cap for 10-L container. For easy and safe transportation of filled containers.
    • PCS
    • 4
    • Guiding sleeve
    • 6.2709.070
    • For fixation of buret and dosing tips in titration heads and electrode holders
    • For fixation of buret and dosing tips in titration heads and electrode holders
    • PCS
    • 2
    • Spray nozzle
    • 6.2740.020
    • For the fine-spraying of the rinsing solution.
    • <p>For the fine-spraying of the rinsing solution.</p>
    • PCS
    • 6
    • Sample beakers, clear glass, 120 mL, 20 pieces 
    • 6.01400.300
    • Sample beakers, clear glass, 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces.
    • <p>Sample beakers, clear glass, 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces.</p>
    • PCS
    • 1
    • Sample beakers, amber glass, 120 mL, 20 pieces
    • 6.01400.303
    • Sample beakers, amber glass, 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces
    • <p>Sample beakers, amber glass, 120 mL, suitable for 602041030 OMNIS sample rack, 20 pieces</p>
    • PCS
    • 1
    • Consumable Kit OMNIS Gripper
    • 6.05700.000
    • Four slide sleeves and rubber gripper fingers each for replacement on the gripper finger of the OMNIS Sample Robot.
    • <p>Four slide sleeves and rubber gripper fingers each for replacement on the gripper finger of the OMNIS Sample Robot.</p>
    • PCS
    • 1
    • Consumable Kit OMNIS Pump Module (2-channel)
    • 6.05700.010
    • Two pump tubings each and associated press clamps for replacement in the OMNIS pump module. One Consumable Kit can be used for re-equipping two peristaltic pumps of the pump module.
    • <p>Two pump tubings each and associated press clamps for replacement in the OMNIS pump module. One Consumable Kit can be used for re-equipping two peristaltic pumps of the pump module.</p>
    • PCS
    • 1