930 Combustion IC PP (AJ)
2.930.9010
51 Recenzji/(je) na portalu SelectScience
- Przegląd funkcji
- Specyfikacja techniczna
The 930 Combustion IC PP (AJ) enables the analysis of halogens and sulfur in flammable samples of all types using inline combustion digestion (pyrohydrolysis) with subsequent ion chromatography determination (Combustion IC). It comprises all required components, e.g., the Combustion Module from Analytik Jena (2.136.0700), the 920 Absorber Module, the 930 Compact IC Flex Oven/SeS/PP/Deg, and the MagIC Net software. If necessary, the 930 Metrohm Combustion IC package can be supplemented with an Autosampler for solid or liquid samples (MMS 5000 Autosampler). The entire analysis, including sample input and sample digestion, is completely automated and is completely controlled by MagIC Net.
Dowiedz się więcej: 930 Combustion IC PP (AJ)
Techniki łączone
Rozszerzenie zakresu chromatografii jonowej: zaawansowane pobieranie próbki, czuła detekcja lub analiza wieloparametrowa.Dlaczego Techniki łączone?
Wyposaż Twój 930 Combustion IC PP (AJ)
Pobierz akcesoria pdf
Pobierz akcesoria pdf- części w zestawie
- opcjonalne części
Metrosep A PCC 2 HC/4.0
6.1006.340
For anion preconcentration and matrix elimination. The enlargement of the packing bed increases the capacity of the two preconcentration columns completely made of PEEK. The high capacity is required primarily when matrix effects might cause an overloading of the preconcentration column or when samples with high ionic strength are to be analyzed.
Metrosep A Trap 1 - 100/4.0
6.1014.000
High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.This column is primarily used with gradient applications.
Metrosep I Trap 1 - 100/4.0
6.1014.200
The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
Piston tongs
6.1546.030
For pistons for 807 Dosing Units or cylinder units OMNIS.
Zobacz więcej
Powiązane artykuły
29 maj 2023
Przetwarzanie emitowanego układu węgla na źródła chemicznych metodami elektrochemicznymi
15 maj 2023
Sterowanie procesem kąpieli do niklowania bezprądowego za pomocą czujników bezrtęciowych
30 maj 2022
