Foi redireccionado para a sua versão local da página solicitada.
Pedir orçamento
930 Combustion IC PP (AJ)

930 Combustion IC PP (AJ)

2.930.9010

    • Metrosep A PCC 2 HC/4.0
    • 6.1006.340
    • For anion preconcentration and matrix elimination. The enlargement of the packing bed increases the capacity of the two preconcentration columns completely made of PEEK. The high capacity is required primarily when matrix effects might cause an overloading of the preconcentration column or when samples with high ionic strength are to be analyzed.
    • <p>For anion preconcentration and matrix elimination. The enlargement of the packing bed increases the capacity of the two preconcentration columns completely made of PEEK. The high capacity is required primarily when matrix effects might cause an overloading of the preconcentration column or when samples with high ionic strength are to be analyzed.</p>
    • PCS
    • 1
    • Metrosep A Trap 1 - 100/4.0
    • 6.1014.000
    • High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.This column is primarily used with gradient applications.
    • <p>High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.</p><p>This column is primarily used with gradient applications.</p>
    • PCS
    • 1
    • Metrosep I Trap 1 - 100/4.0
    • 6.1014.200
    • The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
    • <p>The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.</p>
    • PCS
    • 1
    • Piston tongs
    • 6.1546.030
    • For pistons for 807 Dosing Units or cylinder units OMNIS.
    • <p>For pistons for 807 Dosing Units or cylinder units OMNIS.</p>
    • PCS
    • 2
    • Bottle attachment / GL 45 - 3 x UNF 10/32
    • 6.1602.150
    • For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.
    • <p>For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.</p>
    • PCS
    • 1
    • Bottle attachment GL 45 for eluents and reagents
    • 6.1602.160
    • For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.
    • <p>For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.</p>
    • PCS
    • 2
    • Thread adapter S 40 to GL 45
    • 6.1618.020
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • PCS
    • 2
    • PTFE capillary 0.5 mm i.d. / 3 m
    • 6.1803.030
    • Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • PCS
    • 3
    • Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    • 6.1803.130
    • Connecting capillary from the eluent components to the Eluent Synthesizer
    • Connecting capillary from the eluent components to the Eluent Synthesizer
    • PCS
    • 1
    • Adapter 807 Dosing Unit Port 4, M6 inner 
    • 6.1808.280
    • Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.
    • <p>Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.</p>
    • PCS
    • 1
    • PEEK sample loop 250 µL
    • 6.1825.290
    • Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.
    • <p>Sample loop for &laquo;Metrohm intelligent Partial loop Technique&raquo; (MiPT) and&nbsp;for PILS (particle into liquid sampler). With 2 Peek pressure screws.</p>
    • PCS
    • 1
    • PEEK capillary 0.5 mm i.d., 15 cm
    • 6.1831.040
    • For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • PCS
    • 1
    • Colored sleeves for capillaries
    • 6.2251.000
    • Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
    • Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
    • PCS
    • 1
    • Absorber tube to the Absorber Module
    • 6.2421.000
    • Absorber tube for the absorption of the combustion gases from the Combustion Module.
    • <p>Absorber tube for the absorption of the combustion gases from the Combustion Module. </p>
    • PCS
    • 1
    • Capillary cutter
    • 6.2621.080
    • Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.
    • <p>Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.</p>
    • PCS
    • 1
    • Pressure screw 5x
    • 6.2744.010
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • PCS
    • 3
    • Pressure screw 2x
    • 6.2744.014
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • PCS
    • 1
    • Coupling olive/UNF 10/32, 2x
    • 6.2744.034
    • Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.
    • <p>Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.</p>
    • PCS
    • 1
    • Pressure screw long
    • 6.2744.090
    • Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
    • Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
    • PCS
    • 4
    • Pressure screw PEEK UNF 1/4-28, 3 pieces
    • 6.2744.170
    • Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
    • Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
    • PCS
    • 1
    • Adapter UNF 10/32 outer / M6 inner
    • 6.2744.200
    • Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
    • Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
    • PCS
    • 1
    • Screw stopper 10/32 long
    • 6.2744.220
    • For Professional IC Instruments. For sealing unused ports of degassers and MCS.
    • For Professional IC Instruments. For sealing unused&nbsp;ports of degassers and MCS.
    • PCS
    • 8
    • PEEK pressure screw 14 mm, 3 pcs.
    • 6.2744.350
    • With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.
    • <p>With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.</p>
    • PCS
    • 2
    • Holder for absorber tubing
    • 6.2766.000
    • Holder for fastening the absorber tubing in the Absorber Module.
    • <p>Holder for fastening the absorber tubing in the Absorber Module.</p>
    • PCS
    • 1
    • Holder for inlet valve
    • 6.2766.010
    • Holder for inlet valve to the Absorber Module.
    • <p>Holder for inlet valve to the Absorber Module.</p>
    • PCS
    • 1
    • Inlet valve PEEK
    • 6.2824.170
    • Metal-free check valve for the inlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.
    • <p>Metal-free check valve for the inlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.</p>
    • PCS
    • 1
    • MSM Rotor A
    • 6.2832.000
    • Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
    • Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
    • PCS
    • 1
    • Adapter sleeve, MSM
    • 6.2842.020
    • Not only the MSM Rotor A but also the MSM-LC Rotor A can be installed in the rotor housing with the aid of the adapter sleeve.
    • <p>Not only the MSM Rotor A but also the MSM-LC Rotor A can be installed in the rotor housing with the aid of the adapter sleeve.</p>
    • PCS
    • 1
    • 807 Dosing Unit 5 mL
    • 6.3032.150
    • 807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • Accessory kit: Vario/Flex Basic
    • 6.5000.000
    • Basic set of accessories for a Professional IC Vario or Compact IC Flex.
    • <p>Basic set of accessories for a Professional IC Vario or Compact IC Flex.</p>
    • PCS
    • 1
    • Accessory kit: Vario/Flex ONE
    • 6.5000.010
    • Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.
    • <p>Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.</p>
    • PCS
    • 1
    • Accessory kit: Vario/Flex SeS
    • 6.5000.020
    • Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.
    • <p>Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.</p>
    • PCS
    • 1
    • 800 Dosino (cable length 0.65 m)
    • 1.800.0040
    • Drive with write/read hardware for intelligent dosing units. With permanently attached cable (length 0.65 m).
    • <p>Drive with write/read hardware for intelligent dosing units. With permanently attached cable (length 0.65 m).</p>
    • PCS
    • 2
    • IC Conductivity Detector
    • 1.850.9010
    • Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.
    • <p>Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.</p>
    • PCS
    • 1
    • 920 Absorber Module
    • 1.920.0010
    • The 920 Absorber Module combines the Combustion Module with the ion chromatograph. The 920 Absorber Module ensures that the gaseous compounds of the analytes are dissolved and channeled to the IC. It is responsible for the entire Liquid Handling. In addition to Combustion IC, it can also be used for gas analysis.
    • <p>The 920 Absorber Module combines the Combustion Module with the ion chromatograph. The 920 Absorber Module ensures that the gaseous compounds of the analytes are dissolved and channeled to the IC. It is responsible for the entire Liquid Handling. In addition to Combustion IC, it can also be used for gas analysis.</p>
    • PCS
    • 1
    • 930 Compact IC Flex Oven/SeS/PP/Deg
    • 1.930.2560
    • The 930 Compact IC Flex Oven/SeS/PP/Deg is the intelligent Compact IC instrument with column oven, sequential suppression, peristaltic pump for suppressor regeneration and built-in degasser. The instrument can be used with any separation and detection methods.Typical areas of application:Anion or cation determinations with sequential suppression and conductivity detection
    • <p>The 930 Compact IC Flex Oven/SeS/PP/Deg is the intelligent Compact IC instrument with <strong>column oven</strong>, <strong>sequential suppression</strong>, <strong>peristaltic pump</strong> for suppressor regeneration and built-in <strong>degasser</strong>. The instrument can be used with any separation and detection methods.<br/><br/>Typical areas of application:</p><ul><li>Anion or cation determinations with sequential suppression and conductivity detection</li></ul>
    • PCS
    • 1
    • Metrosep A PCC 2 HC/4.0
    • 6.1006.340
    • For anion preconcentration and matrix elimination. The enlargement of the packing bed increases the capacity of the two preconcentration columns completely made of PEEK. The high capacity is required primarily when matrix effects might cause an overloading of the preconcentration column or when samples with high ionic strength are to be analyzed.
    • <p>For anion preconcentration and matrix elimination. The enlargement of the packing bed increases the capacity of the two preconcentration columns completely made of PEEK. The high capacity is required primarily when matrix effects might cause an overloading of the preconcentration column or when samples with high ionic strength are to be analyzed.</p>
    • PCS
    • 1
    • Metrosep A Trap 1 - 100/4.0
    • 6.1014.000
    • High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.This column is primarily used with gradient applications.
    • <p>High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.</p><p>This column is primarily used with gradient applications.</p>
    • PCS
    • 1
    • Metrosep I Trap 1 - 100/4.0
    • 6.1014.200
    • The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
    • <p>The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.</p>
    • PCS
    • 1
    • Piston tongs
    • 6.1546.030
    • For pistons for 807 Dosing Units or cylinder units OMNIS.
    • <p>For pistons for 807 Dosing Units or cylinder units OMNIS.</p>
    • PCS
    • 2
    • Bottle attachment / GL 45 - 3 x UNF 10/32
    • 6.1602.150
    • For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.
    • <p>For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.</p>
    • PCS
    • 1
    • Bottle attachment GL 45 for eluents and reagents
    • 6.1602.160
    • For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.
    • <p>For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.</p>
    • PCS
    • 2
    • Thread adapter S 40 to GL 45
    • 6.1618.020
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • PCS
    • 2
    • PTFE capillary 0.5 mm i.d. / 3 m
    • 6.1803.030
    • Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • PCS
    • 3
    • Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    • 6.1803.130
    • Connecting capillary from the eluent components to the Eluent Synthesizer
    • Connecting capillary from the eluent components to the Eluent Synthesizer
    • PCS
    • 1
    • Adapter 807 Dosing Unit Port 4, M6 inner 
    • 6.1808.280
    • Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.
    • <p>Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.</p>
    • PCS
    • 1
    • PEEK sample loop 250 µL
    • 6.1825.290
    • Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.
    • <p>Sample loop for &laquo;Metrohm intelligent Partial loop Technique&raquo; (MiPT) and&nbsp;for PILS (particle into liquid sampler). With 2 Peek pressure screws.</p>
    • PCS
    • 1
    • PEEK capillary 0.5 mm i.d., 15 cm
    • 6.1831.040
    • For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • PCS
    • 1
    • Colored sleeves for capillaries
    • 6.2251.000
    • Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
    • Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
    • PCS
    • 1
    • Absorber tube to the Absorber Module
    • 6.2421.000
    • Absorber tube for the absorption of the combustion gases from the Combustion Module.
    • <p>Absorber tube for the absorption of the combustion gases from the Combustion Module. </p>
    • PCS
    • 1
    • Capillary cutter
    • 6.2621.080
    • Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.
    • <p>Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.</p>
    • PCS
    • 1
    • Pressure screw 5x
    • 6.2744.010
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • PCS
    • 3
    • Pressure screw 2x
    • 6.2744.014
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • PCS
    • 1
    • Coupling olive/UNF 10/32, 2x
    • 6.2744.034
    • Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.
    • <p>Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.</p>
    • PCS
    • 1
    • Pressure screw long
    • 6.2744.090
    • Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
    • Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
    • PCS
    • 4
    • Pressure screw PEEK UNF 1/4-28, 3 pieces
    • 6.2744.170
    • Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
    • Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
    • PCS
    • 1
    • Adapter UNF 10/32 outer / M6 inner
    • 6.2744.200
    • Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
    • Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
    • PCS
    • 1
    • Screw stopper 10/32 long
    • 6.2744.220
    • For Professional IC Instruments. For sealing unused ports of degassers and MCS.
    • For Professional IC Instruments. For sealing unused&nbsp;ports of degassers and MCS.
    • PCS
    • 8
    • PEEK pressure screw 14 mm, 3 pcs.
    • 6.2744.350
    • With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.
    • <p>With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.</p>
    • PCS
    • 2
    • Holder for absorber tubing
    • 6.2766.000
    • Holder for fastening the absorber tubing in the Absorber Module.
    • <p>Holder for fastening the absorber tubing in the Absorber Module.</p>
    • PCS
    • 1
    • Holder for inlet valve
    • 6.2766.010
    • Holder for inlet valve to the Absorber Module.
    • <p>Holder for inlet valve to the Absorber Module.</p>
    • PCS
    • 1
    • Inlet valve PEEK
    • 6.2824.170
    • Metal-free check valve for the inlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.
    • <p>Metal-free check valve for the inlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.</p>
    • PCS
    • 1
    • MSM Rotor A
    • 6.2832.000
    • Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
    • Suppressor rotor for all IC instruments with MSM (Metrohm Suppressor Module)
    • PCS
    • 1
    • Adapter sleeve, MSM
    • 6.2842.020
    • Not only the MSM Rotor A but also the MSM-LC Rotor A can be installed in the rotor housing with the aid of the adapter sleeve.
    • <p>Not only the MSM Rotor A but also the MSM-LC Rotor A can be installed in the rotor housing with the aid of the adapter sleeve.</p>
    • PCS
    • 1
    • 807 Dosing Unit 5 mL
    • 6.3032.150
    • 807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • Accessory kit: Vario/Flex Basic
    • 6.5000.000
    • Basic set of accessories for a Professional IC Vario or Compact IC Flex.
    • <p>Basic set of accessories for a Professional IC Vario or Compact IC Flex.</p>
    • PCS
    • 1
    • Accessory kit: Vario/Flex ONE
    • 6.5000.010
    • Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.
    • <p>Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.</p>
    • PCS
    • 1
    • Accessory kit: Vario/Flex SeS
    • 6.5000.020
    • Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.
    • <p>Set of accessories for sequential suppression (SeS) for Professional IC Vario and Compact IC Flex instruments. Without Suppressor Rotor.</p>
    • PCS
    • 1
    • 948 Continuous IC Module, CEP
    • 2.948.0010
    • Automated hydroxide eluent production takes place with the 948 Continuous IC Module. Isocratic eluents can be produced and gradients can be run.The 948 Continuous IC Module, CEP is comprised of the following parts:948 Continuous IC Module; Eluent Producer Cartridge (EPC, 6.02850.200); Continuous anion trap (CT, 6.02850.100); High-pressure degasser (H-DEG, 6.02850.000); Example methods according to 948 Continuous IC Module manual. 
    • <p>Automated hydroxide eluent production takes place with the 948 Continuous IC Module. Isocratic eluents can be produced and gradients can be run.<br />The 948 Continuous IC Module, CEP is comprised of the following parts:</p><ul><li>948 Continuous IC Module</li><li>Eluent Producer Cartridge (EPC, 6.02850.200)</li><li>Continuous anion trap (CT, 6.02850.100)</li><li>High-pressure degasser (H-DEG, 6.02850.000)</li></ul><p><a href="http://www.metrohm.com/content/dam/metrohm/shared/method-files/Example_methods_948.zip">Example methods</a> according to 948 Continuous IC Module manual.<br />&nbsp;</p>
    • PCS
    • 1
    • MSM-HC Rotor A, Hydroxide
    • 6.2842.100
    • Suppressor rotor with high capacity for hydroxide eluents for all IC instruments with MSM-HC (Metrohm Suppressor Module with high capacity).
    • <p>Suppressor rotor with high capacity for hydroxide eluents for all IC instruments with MSM-HC (Metrohm Suppressor Module with high capacity).</p>
    • PCS
    • 1
    • IC equipment: Dosino regeneration
    • 6.5330.190
    • Accessory set for the assembly of a Dosino for automatic regeneration of the Metrohm Suppressor Module (MSM).
    • <p>Accessory set for the assembly of a Dosino for automatic regeneration of the Metrohm Suppressor Module (MSM).</p>
    • PCS
    • 1
    • MagIC Net 4.2 Compact: 1 license
    • 6.6059.421
    • Professional chromatography software from Metrohm for controlling one intelligent Compact IC instrument, one detector and one Autosampler, or one 771 Compact Interface. The software permits checks, data acquisition, data evaluation and data monitoring as well as report generation of ion chromatographic analyses.Graphical user interface for routine operations, extensive database programs, method development, configuration and manual control panel; very flexible user management, efficient database operations, extensive data export functions, individually configurable report generator, control and monitoring of all system components and the chromatography results.MagIC Net Compact complies fully with FDA Regulation 21 CFR Part 11 as well as GLP.MagIC Net is available in 15 dialog languages: German, English, Chinese, Traditional Chinese, French, Italian, Spanish, Portuguese, Bulgarian, Czech, Hungarian, Japanese, Korean, Russian, SlovakianWith this version, the graphic user interface has been modernized, which improves, among other things, the scaling and sharpness of the user interface on 4K monitors.1 license.The installation and documents are supplied on a USB flash drive.
    • <p>Professional chromatography software from Metrohm for controlling one intelligent Compact IC instrument, one detector and one Autosampler, or one 771 Compact Interface. The software permits checks, data acquisition, data evaluation and data monitoring as well as report generation of ion chromatographic analyses.</p><p>Graphical user interface for routine operations, extensive database programs, method development, configuration and manual control panel; very flexible user management, efficient database operations, extensive data export functions, individually configurable report generator, control and monitoring of all system components and the chromatography results.</p><p>MagIC Net Compact complies fully with FDA Regulation 21 CFR Part 11 as well as GLP.</p><p>MagIC Net is available in 15 dialog languages: German, English, Chinese, Traditional Chinese, French, Italian, Spanish, Portuguese, Bulgarian, Czech, Hungarian, Japanese, Korean, Russian, Slovakian</p><p>With this version, the graphic user interface has been modernized, which improves, among other things, the scaling and sharpness of the user interface on 4K monitors.</p><p>1 license.</p><p>The installation and documents are supplied on a USB flash drive.</p>
    • PCS
    • 1
    • MagIC Net 4.2 Professional: 1 license
    • 6.6059.422
    • Professional chromatography software from Metrohm for controlling all intelligent Professional IC systems, Compact IC systems and their peripherals, all detectors and the various Auto samplers, 800 Dosino, 771 Compact Interface, etc. The software permits checks, data acquisition, data evaluation and data monitoring as well as report generation of ion chromatographic analyses.Graphical user interface for routine operations, extensive database programs, method development, configuration and manual control panel; very flexible user management, efficient database operations, extensive data export functions, individually configurable report generator, control and monitoring of all system components and the chromatography results.MagIC Net Professional complies fully with FDA Regulation 21 CFR Part 11 as well as GLP.MagIC Net is available in 15 dialog languages: German, English, Chinese, Traditional Chinese, French, Italian, Spanish, Portuguese, Bulgarian, Czech, Hungarian, Japanese, Korean, Russian, SlovakianWith this version, the graphic user interface has been modernized, which improves, among other things, the scaling and sharpness of the user interface on 4K monitors.1 licenseThe installation and documents are supplied on a USB flash drive.
    • <p>Professional chromatography software from Metrohm for controlling all intelligent Professional IC systems, Compact IC systems and their peripherals, all detectors and the various Auto samplers, 800 Dosino, 771 Compact Interface, etc. The software permits checks, data acquisition, data evaluation and data monitoring as well as report generation of ion chromatographic analyses.</p><p>Graphical user interface for routine operations, extensive database programs, method development, configuration and manual control panel; very flexible user management, efficient database operations, extensive data export functions, individually configurable report generator, control and monitoring of all system components and the chromatography results.</p><p>MagIC Net Professional complies fully with FDA Regulation 21 CFR Part 11 as well as GLP.</p><p>MagIC Net is available in 15 dialog languages: German, English, Chinese, Traditional Chinese, French, Italian, Spanish, Portuguese, Bulgarian, Czech, Hungarian, Japanese, Korean, Russian, Slovakian</p><p>With this version, the graphic user interface has been modernized, which improves, among other things, the scaling and sharpness of the user interface on 4K monitors.</p><p>1 license</p><p>The installation and documents are supplied on a USB flash drive.</p>
    • PCS
    • 1
    • MagIC Net 4.2 Multi: 3 licenses
    • 6.6059.423
    • Client/server-compatible chromatography software from Metrohm for controlling all intelligent Professional IC systems, Compact IC systems and their peripherals, all detectors and the various Autosamplers, 800 Dosino, 771 Compact Interface, etc. The software permits checks, data acquisition, data evaluation and data monitoring as well as report generation of ion chromatographic analyses.Data and method are centrally stored on a Server.Graphical user interface for routine operations, extensive database programs, method development, configuration and manual control panel; very flexible user management, efficient database operations, extensive data export functions, individually configurable report generator, control and monitoring of all system components and the chromatography results.MagIC Net Multi complies fully with FDA Regulation 21 CFR Part 11 as well as with GLP.MagIC Net is available in 15 dialog languages: German, English, Chinese, Traditional Chinese, French, Italian, Spanish, Portuguese, Bulgarian, Czech, Hungarian, Japanese, Korean, Russian, SlovakianWith this version, the graphic user interface has been modernized, which improves, among other things, the scaling and sharpness of the user interface on 4K monitors.Performance for client/server systems with servers outside the in-house company network has been improved.Client/server version with 3 licenses
    • <p>Client/server-compatible chromatography software from Metrohm for controlling all intelligent Professional IC systems, Compact IC systems and their peripherals, all detectors and the various Autosamplers, 800 Dosino, 771 Compact Interface, etc. <br/>The software permits checks, data acquisition, data evaluation and data monitoring as well as report generation of ion chromatographic analyses.<br/>Data and method are centrally stored on a Server.<br/> <br/>Graphical user interface for routine operations, extensive database programs, method development, configuration and manual control panel; very flexible user management, efficient database operations, extensive data export functions, individually configurable report generator, control and monitoring of all system components and the chromatography results.</p><p>MagIC Net Multi complies fully with FDA Regulation 21 CFR Part 11 as well as with GLP.</p><p>MagIC Net is available in 15 dialog languages: German, English, Chinese, Traditional Chinese, French, Italian, Spanish, Portuguese, Bulgarian, Czech, Hungarian, Japanese, Korean, Russian, Slovakian</p><p>With this version, the graphic user interface has been modernized, which improves, among other things, the scaling and sharpness of the user interface on 4K monitors.<br/>Performance for client/server systems with servers outside the in-house company network has been improved.</p><p>Client/server version with 3 licenses</p>
    • PCS
    • 1
    • Combustion tube (AJ)
    • 6.7301.000
    • Quartz combustion tube for the Combustion Module.
    • <p>Quartz combustion tube for the Combustion Module.</p>
    • PCS
    • 1
    • Guide tubing for ABD (old)
    • 6.7301.100
    • Guide tubing for Automatic Boat Driver of the Combustion Module (up to ABD serial number 1709 590).
    • <p>Guide tubing for Automatic Boat Driver of the Combustion Module (up to ABD serial number 1709 590).</p>
    • PCS
    • 1
    • Hook for ABD
    • 6.7301.110
    • Quartz glass hook for quartz glass boat in the Automatic Boat Driver of the Combustion Module.
    • <p>Quartz glass hook for quartz glass boat in the Automatic Boat Driver of the Combustion Module.</p>
    • PCS
    • 1
    • Septum 12.5 mm
    • 6.7301.140
    • Septum for liquid sample port, 5 pcs.
    • <p>Septum for liquid sample port, 5 pcs.</p>
    • PCS
    • 1
    • Manual dosing syringe 100 µL
    • 6.7301.160
    • Manual dosing syringe for manual liquid sample injection
    • <p>Manual dosing syringe for manual liquid sample injection</p>
    • PCS
    • 1
    • O-ring 14 × 4 mm for ABD
    • 6.7301.170
    • Sealing ring for connection between ABD and quartz glass tubing
    • <p>Sealing ring for connection between ABD and quartz glass tubing</p>
    • PCS
    • 1
    • Finger-Tight-Set 1/8 in.
    • 6.7301.180
    • Finger-Tight for gas connection on the Automatic Boat Driver
    • <p>Finger-Tight for gas connection on the Automatic Boat Driver</p>
    • PCS
    • 1
    • Sluice seal for ABD
    • 6.7301.190
    • Seal for the sluice on the Automatic Boat Driver.
    • <p>Seal for the sluice on the Automatic Boat Driver.</p>
    • PCS
    • 1
    • Guide tubing for ABD (new)
    • 6.7301.200
    • Guide tubing for Automatic Boat Driver of the Combustion Module (ABD serial numbers starting with 1709591)
    • <p>Guide tubing for Automatic Boat Driver of the Combustion Module (ABD serial numbers starting with 1709591)</p>
    • PCS
    • 1
    • T connector CIC
    • 6.7301.210
    • T connector after on the outlet of the oven for supplying absorption solution.
    • <p>T connector after on the outlet of the oven for supplying absorption solution.</p>
    • PCS
    • 1
    • Non-return tubing Combustion IC
    • 6.7301.230
    • Non-return tubing for the protection of the gas box
    • <p>Non-return tubing for the protection of the gas box</p>
    • PCS
    • 1
    • Flame sensor
    • 6.7301.250
    • Flame sensor for fully automatic sample combustion
    • <p>Flame sensor for fully automatic sample combustion</p>
    • PCS
    • 1
    • Ceramic combustion tube CIC AJ, complete
    • 6.7301.300
    • Ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).
    • <p>Ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).</p>
    • PCS
    • 1
    • Outer tube, ceramic combustion tube AJ
    • 6.7301.310
    • Outer tube of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).
    • <p>Outer tube of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).</p>
    • PCS
    • 1
    • Connecting tube, ceramic combustion tube AJ
    • 6.7301.320
    • Connecting tube of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).
    • <p>Connecting tube of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).</p>
    • PCS
    • 1
    • Ceramic inlay, ceramic combustion tube AJ
    • 6.7301.330
    • Ceramic inlay of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).
    • <p>Ceramic inlay of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).</p>
    • PCS
    • 1
    • Frit, ceramic combustion tube AJ
    • 6.7301.340
    • Frit of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).
    • <p>Frit of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).</p>
    • PCS
    • 1
    • Clamping screw, ceramic combustion tube AJ
    • 6.7301.350
    • Clamping screw of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).
    • <p>Clamping screw of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).</p>
    • PCS
    • 1
    • Union nut, ceramic combustion tube AJ
    • 6.7301.360
    • Union nut of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).
    • <p>Union nut of the ceramic combustion tube for the Combustion Module (Oven + ABD, AJ).</p>
    • PCS
    • 1
    • Kit for solid samples for MMS 5000, 35 positions
    • 6.7302.000
    • Kit for solid samples for MMS 5000 with rack for sample boats, grippers and 10 quartz glass boats.
    • <p>Kit for solid samples for MMS 5000 with rack for sample boats, grippers and 10 quartz glass boats.</p>
    • PCS
    • 1
    • Quartz boat 40 x 9 mm (AJ)
    • 6.7302.100
    • Quartz glass boat for sample injection in Combustion Module, 10 pcs.
    • <p>Quartz glass boat for sample injection in Combustion Module, 10 pcs.</p>
    • PCS
    • 1
    • Quartz vial, 6 x 18 mm, for CIC, 50 pcs.
    • 6.7302.110
    • Sample vials made of quartz for Combustion IC. The sample vials are used when the sample contains alkali and/or alkaline earth cations which could affect the quartz combustion tube. These cations reaction with the quartz in the sample vial and are thus kept away from the combustion tube. Quartz wool (6.7302.120) is used to fix the samples in place in the sample vials.
    • <p>Sample vials made of quartz for Combustion IC. The sample vials are used when the sample contains alkali and/or alkaline earth cations which could affect the quartz combustion tube. These cations reaction with the quartz in the sample vial and are thus kept away from the combustion tube. Quartz wool (6.7302.120) is used to fix the samples in place in the sample vials.</p>
    • PCS
    • 1
    • Quartz wool for 6.7302.110, 10 g
    • 6.7302.120
    • Quartz wool for fixing the sample in place in the sample vial made of quartz (6.7302.110).
    • <p>Quartz wool for fixing the sample in place in the sample vial made of quartz (6.7302.110).</p>
    • PCS
    • 1
    • Ceramic boat 40 x 9 mm (AJ)
    • 6.7302.130
    • Ceramic boat for sample injection in Combustion Module, 10 pcs.
    • <p>Ceramic boat for sample injection in Combustion Module, 10 pcs.</p>
    • PCS
    • 1
    • Gripper for boat
    • 6.7302.200
    • Gripper for solid changer setup MMS 5000
    • <p>Gripper for solid changer setup MMS 5000</p>
    • PCS
    • 1
    • Kit for liquid samples for MMS 5000, 112 positions
    • 6.7303.000
    • Kit for liquid samples for MMS 5000 with rack for sample vessels, 100 µL syringe with replaceable needle and 100 snap-ring bottles.
    • <p>Kit for liquid samples for MMS 5000 with rack for sample vessels, 100 µL syringe with replaceable needle and 100 snap-ring bottles.</p>
    • PCS
    • 1
    • Glass vial, 1.5 mL, 100 pieces
    • 6.7303.100
    • For use with the following sample changers: Liquid Autosampler CIC (TEI), MMS 5000 Autosampler (AJ) and 889 Sample Center.
    • <p>For use with the following sample changers: Liquid Autosampler CIC (TEI), MMS 5000 Autosampler (AJ) and 889 Sample Center.</p>
    • PCS
    • 1
    • Septum for 67303100, 100 pieces
    • 6.7303.110
    • For use with the 67303100 Glass vial on the following sample changers: Liquid Autosampler CIC (TEI), MMS 5000 Autosampler (AJ), and 889 Sample Center.
    • <p>For use with the 67303100 Glass vial on the following sample changers: Liquid Autosampler CIC (TEI), MMS 5000 Autosampler (AJ), and 889 Sample Center.</p>
    • PCS
    • 1
    • Septum for rinsing vessel
    • 6.7303.240
    • Septum for rinsing vessel in the liquids kit for MMS 5000
    • <p>Septum for rinsing vessel in the liquids kit for MMS 5000</p>
    • PCS
    • 1
    • Septum to waste vessel
    • 6.7303.250
    • Septum to waste vessel in the MMS 5000 (2.136.0800).
    • <p>Septum to waste vessel in the MMS 5000 (2.136.0800).</p>
    • PCS
    • 1
    • FAST connector, angled
    • 6.7304.000
    • For connections with the quartz glass tubing
    • <p>For connections with the quartz glass tubing</p>
    • PCS
    • 1
    • FAST connector, straight
    • 6.7304.010
    • For connections with the quartz glass tubing
    • <p>For connections with the quartz glass tubing</p>
    • PCS
    • 1
    • Oxygen/argon connection tubing, 2 m
    • 6.7304.020
    • Connection tubing for gas supply for the Combustion Module
    • <p>Connection tubing for gas supply for the Combustion Module</p>
    • PCS
    • 1
    • Oven coupling for LPG/GSS (AJ)
    • 6.7304.030
    • Connector for connecting the LPG/GSS module (AJ) to the combustion oven. For Metrohm Combustion IC.
    • <p>Connector for connecting the LPG/GSS module (AJ) to the combustion oven. For Metrohm Combustion IC.</p>
    • PCS
    • 1
    • PEEK gas inlet tube for GSS/LPG
    • 6.7305.030
    • Flexible tube made of PEEK guided through 6.730.5020 perforated septum.
    • <p>Flexible tube made of PEEK guided through 6.730.5020 perforated septum.</p>
    • PCS
    • 1
    • T-connector to LPG/GSS Module
    • 6.7305.050
    • T-connector with two 6/4 mm, 10 cm and 70 cm connection tubings
    • <p>T-connector with two 6/4 mm, 10 cm and 70 cm connection tubings</p>
    • PCS
    • 1