906 Titrando
2.906.0010
4.83
/ 5.0 4 Reviews på SelectScience
- Overblik over funktioner
High-end titrator for potentiometric and volumetric Karl Fischer titration with one measuring interface and internal buret drive.
- built-in buret drive
- dynamic (DET), monotonic (MET) and endpoint titration (SET), enzymatic and pH-STAT titrations (STAT), Karl Fischer titration (KFT)
- Measurement with ion-selective electrodes (MEAS CONC)
- "iTrode" intelligent electrodes
- Dosing functions with monitoring, liquid handling
- four MSB connectors for additional stirrers or dosing device systems
- USB connector
- For use with OMNIS Software, tiamo software, or Touch Control
- Complies with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required
Få mere at vide Detail
Titrando
Fra stand-alone titrator til en fuldautomatisk løsning i et overordnet netværk: en potentiometrisk titrator, der kan skræddersyes til dine specifikke krav.Hvorfor? Titrando?
Udstyr Din 906 Titrando
Download PDF med tilbehør



- Inkluderede dele
- Valgfrie dele
RS-232/USB box
6.2148.020
Extends the Titrando, USB Sample Processors, Dosing Interface, Titrosampler by two RS-232 interfaces for connecting e.g. balances, PC, LIMS. Requires 6.2151.030 cable.
800 Dosino
2.800.0010
The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
801 Stirrer with stand
2.801.0040
Magnetic stirrer including base plate, support rod and electrode holder for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimat and 780/781 pH meters as well as the 856 and 867 measuring modules. With permanently attached cable for MSB (Metrohm Serial Bus).
802 Stirrer for 804 Ti Stand
2.802.0040
Rod stirrer including 6.1909.010 stirring propeller.
Relaterede artikler
1 / 1
