906 Titrando
2.906.0010
4.83
/ 5.0 4 nhận xét trên trang SelectScience
- Tổng quan
High-end titrator for potentiometric and volumetric Karl Fischer titration with one measuring interface and internal buret drive.
- built-in buret drive
- dynamic (DET), monotonic (MET) and endpoint titration (SET), enzymatic and pH-STAT titrations (STAT), Karl Fischer titration (KFT)
- Measurement with ion-selective electrodes (MEAS CONC)
- "iTrode" intelligent electrodes
- Dosing functions with monitoring, liquid handling
- four MSB connectors for additional stirrers or dosing device systems
- USB connector
- For use with OMNIS Software, tiamo software, or Touch Control
- Complies with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required
Tìm hiểu thêm 906 Titrando
Chuẩn độ điện thế Titrando
Từ thiết bị chuẩn độ độc lập đến giải pháp tự động hóa hoàn toàn trong một mạng lưới bao quát: thiết bị chuẩn độ điện thế có thể được biến đổi theo yêu cầu chuyên biệt của bạn.Tại sao Chuẩn độ điện thế Titrando?
Thiết bị Của bạn 906 Titrando
Tải về bản PDF



- Phụ kiện tiêu chuẩn
- Phụ kiện tùy chọn
RS-232/USB box
6.2148.020
Extends the Titrando, USB Sample Processors, Dosing Interface, Titrosampler by two RS-232 interfaces for connecting e.g. balances, PC, LIMS. Requires 6.2151.030 cable.
800 Dosino
2.800.0010
The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
801 Stirrer with stand
2.801.0040
Magnetic stirrer including base plate, support rod and electrode holder for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimat and 780/781 pH meters as well as the 856 and 867 measuring modules. With permanently attached cable for MSB (Metrohm Serial Bus).
802 Stirrer for 804 Ti Stand
2.802.0040
Rod stirrer including 6.1909.010 stirring propeller.
Những bài viết liên quan
22 thg 11, 2021
Green hydrogen generation: A cross-disciplinary challenge rooted in electrochemistry
1 / 1
