Surfactrode Refill
6.0507.140
- Prezentare generală a caracteristicilor
- Specificații tehnice
This surfactant electrode has to be used in combination with a reference electrode and is suitable, e.g., for:
- titrations of surfactants in non-aqueous matrices (without chloroform)
- two-phase titrations (pH > 10)
Thanks to the renewable electrode surface, this electrode offers a practically unlimited working life and is mainly used for samples such as detergents and soap.
This surfactant electrode has to be used in combination with a reference electrode and is suitable, e.g., for:
- titrations of surfactants in non-aqueous matrices (without chloroform)
- two-phase titrations (pH > 10)
Thanks to the renewable electrode surface, this electrode offers a practically unlimited working life and is mainly used for samples such as detergents and soap.
Faceți cunoștință cu Detail
Echipați al dvs. Surfactrode Refill
Descărcați accesorii PDF






- părți incluse
- părți opționale
Storage vessel
6.2008.040
Together with 6.2008.050 storage vessel holder. it provides a support for the electrode on 807 Dosing Units.
Sleeve with SGJ 14/12 mm
6.1236.020
Sleeve with SGJ 14/12 mm and O-ring.
Filling tool
6.2826.010
For the 6.0507.140 surfactant electrode
Surfactrode refill paste
6.2319.000
Refill paste for 6.0507.140 Surfactrode Refill
LL ISE reference electrode
6.0750.100
Silver / silver chloride reference electrode with double junction system.This reference electrode is well suited for:automated applications; ion measurements; surfactant titrations; The ground-joint diaphragm, which is insensitive to contamination, offers a constant and reproducible electrolyte outflow. Additionally, the reference electrolyte is gelified for even better signal stability. The sensor is delivered with c(KCl) = 3 mol/L as bridge electrolyte, which can be freely selected and exchanged as needed.
Ag/AgCl reference electrode (length 12.5 cm)
6.0726.100
Silver/silver chloride reference electrode with Double-Junction System, installation length 10 cm.The standard ground-joint 14/15 enables easy assembly, and the flexible ground-joint diaphragm, which is insensitive to contamination, can be replaced at any time. The reference electrolyte and the bridge electrolyte can be selected freely according to use, and are easy to replace. This sensor is supplied without electrolyte filling.
Electrode cable / 1 m / F
6.2104.020
For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
Articole înrudite
30 mai 2022
Handheld 785 nm Raman applications: Cutting edge material ID capabilities in your pocket
1 / 1