Ionic Surfactant Electrode
6.0507.120
- Visão geral
- Especificações técnicas
This surfactant electrode has to be used in combination with a reference electrode and is suitable, e.g., for:
- titration of anionic surfactants in aqueous matrices
- titration of cationic surfactants in aqueous matrices
This electrode shows an excellent response due to ionophores immobilized in the membrane.
This surfactant electrode has to be used in combination with a reference electrode and is suitable, e.g., for:
- titration of anionic surfactants in aqueous matrices
- titration of cationic surfactants in aqueous matrices
This electrode shows an excellent response due to ionophores immobilized in the membrane.
Conheça Detail
Equipamento Seu Ionic Surfactant Electrode
Descarregar acessórios PDF




- peças incluídas
- peças opcionais
Storage vessel
6.2008.040
Together with 6.2008.050 storage vessel holder. it provides a support for the electrode on 807 Dosing Units.
Sleeve with SGJ 14/12 mm
6.1236.020
Sleeve with SGJ 14/12 mm and O-ring.
LL ISE reference electrode
6.0750.100
Silver / silver chloride reference electrode with double junction system.This reference electrode is well suited for:automated applications; ion measurements; surfactant titrations; The ground-joint diaphragm, which is insensitive to contamination, offers a constant and reproducible electrolyte outflow. Additionally, the reference electrolyte is gelified for even better signal stability. The sensor is delivered with c(KCl) = 3 mol/L as bridge electrolyte, which can be freely selected and exchanged as needed.
Ag/AgCl reference electrode (length 12.5 cm)
6.0726.100
Silver/silver chloride reference electrode with Double-Junction System, installation length 10 cm.The standard ground-joint 14/15 enables easy assembly, and the flexible ground-joint diaphragm, which is insensitive to contamination, can be replaced at any time. The reference electrolyte and the bridge electrolyte can be selected freely according to use, and are easy to replace. This sensor is supplied without electrolyte filling.
Electrode cable / 1 m / F
6.2104.020
For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
Artigos relacionados
20 de jan. de 2025
Entendendo a titulação potenciométrica: Uma técnica vital na análise farmacêutica
7 de out. de 2024
Por que controlar a temperatura para resultados NIRS mais precisos e reprodutíveis
16 de out. de 2023
Aplicação de métodos validados pela USP para equivalência de colunas de separação
1 / 1