Ionic Surfactant Electrode
6.0507.120
- Oversikt over funksjoner
- Tekniske spesifikasjoner
This surfactant electrode has to be used in combination with a reference electrode and is suitable, e.g., for:
- titration of anionic surfactants in aqueous matrices
- titration of cationic surfactants in aqueous matrices
This electrode shows an excellent response due to ionophores immobilized in the membrane.
This surfactant electrode has to be used in combination with a reference electrode and is suitable, e.g., for:
- titration of anionic surfactants in aqueous matrices
- titration of cationic surfactants in aqueous matrices
This electrode shows an excellent response due to ionophores immobilized in the membrane.
Bli kjent med Detail
Utruste Din Ionic Surfactant Electrode
Scope of delivery and opt. parts (PDF)




- inkluderte deler
- valgfrie deler
Storage vessel
6.2008.040
Together with 6.2008.050 storage vessel holder. it provides a support for the electrode on 807 Dosing Units.
Sleeve with SGJ 14/12 mm
6.1236.020
Sleeve with SGJ 14/12 mm and O-ring.
LL ISE reference electrode
6.0750.100
Silver / silver chloride reference electrode with double junction system.This reference electrode is well suited for:automated applications; ion measurements; surfactant titrations; The ground-joint diaphragm, which is insensitive to contamination, offers a constant and reproducible electrolyte outflow. Additionally, the reference electrolyte is gelified for even better signal stability. The sensor is delivered with c(KCl) = 3 mol/L as bridge electrolyte, which can be freely selected and exchanged as needed.
Ag/AgCl reference electrode (length 12.5 cm)
6.0726.100
Silver/silver chloride reference electrode with Double-Junction System, installation length 10 cm.The standard ground-joint 14/15 enables easy assembly, and the flexible ground-joint diaphragm, which is insensitive to contamination, can be replaced at any time. The reference electrolyte and the bridge electrolyte can be selected freely according to use, and are easy to replace. This sensor is supplied without electrolyte filling.
Electrode cable / 1 m / F
6.2104.020
For connecting electrodes with Metrohm plug-in head G to Metrohm instruments (socket F).
Relaterte artikler
1 / 1