815 Robotic USB Sample Processor XL (1T/0P)
2.815.0030
- Tổng quan
Robotic USB Sample Processor XL with one workstation for the automatic processing of routine samples in series with large quantities and for complex sample preparation or parallel runs. Up to two pumps (membrane or peristaltic) and three dosing devices for Liquid Handling tasks can be connected.
Because of the multitude of application variants, rack, stirrer, titration head, robotic arm, Swing Head and sample vessels must be tailored to the application and ordered separately.
The control is "stand alone" using Touch Control. The following software products can be selected for the PC control: tiamo™ titration software, MagIC Net chromatography software, viva voltammetry software, or OMNIS.
Tìm hiểu thêm 815 Robotic USB Sample Processor XL (1T/0P)
Tự động hóa với Titrando
Các tùy chọn tự động hóa linh hoạt và có thể mở rộng từ việc thao tác với chất lỏng đến đồng hóa và đo trực tiếp.Tại sao Tự động hóa với Titrando?
Thiết bị Của bạn 815 Robotic USB Sample Processor XL (1T/0P)
Tải về bản PDF







- Phụ kiện tiêu chuẩn
- Phụ kiện tùy chọn
Sleeve with SGJ 14/12 mm
6.1236.020
Sleeve with SGJ 14/12 mm and O-ring.
FEP tubing / M6 / 80 cm
6.1805.110
With light and kink protection
Cable USB A – mini-DIN 8-pin
6.2151.000
Controller cable
Hexagon key 4 mm
6.2621.030
Hiển thị thêm
772 Pump Unit – aspirate
2.772.0120
Peristaltic pump for direct connection to Sample Processors. The "Aspiration" version contains extensive accessories for the aspiration of titered-out solutions.
772 Pump Unit – rinse
2.772.0130
Peristaltic pump for direct connection to Sample Processors. The "Rinse" version contains extensive accessories for rinsing.
786 Swing Head with transfer head left
2.786.0010
Additional equipment for Robotic Sample Processors XL for transferring / pipetting from small sample vessels into larger titration vessels on the rack or into an external titration cell; this can be located to the left of the work station.
786 Swing Head with transfer head right
2.786.0020
Additional equipment for Robotic Sample Processors XL for transferring / pipetting from small sample vessels into larger titration vessels on the rack or into an external titration cell; this can be located to the right of the work station.
Hiển thị thêm
Những bài viết liên quan
22 thg 11, 2021
Green hydrogen generation: A cross-disciplinary challenge rooted in electrochemistry
1 / 1
