Ứng dụng

The commercialization of Li-ion batteries in 1991 was the culmination of in-depth R&D conducted by scientists and engineers around the globe over the preceding few decades. Further development of Li-ion batteries and alternative rechargeable batteries has continued until today. As the world is rapidly moving towards a new era defined by green technologies, more practical and accurate R&D is required in order to meet the increasing demands for energy storage systems, specifically from the automotive industry. This white paper presents the basics of the Li-ion battery technology and guides the reader through the relevant techniques and terminologies in Li-ion battery research.

The acid number (AN) is a measure for the quality of oils and their potential to enhance corrosion. When analyzing fresh, unused oils, the AN is used to ensure the specified quality from the manufacturer, whereas for used oils the AN is determined to observe its increase until a critical level is reached. Although it is generally assumed that the AN correlates to the corrosive potential of the oil, this is not exactly correct, as it is the change of the AN value which indicates this issue. Therefore it is necessary to determine the AN on a regular basis.Several standards already exist to determine AN via titration methods, however it is also possible to measure this parameter via spectroscopic (NIRS) methodology. No matter which technique you choose, Metrohm has you covered with high-performance instruments suitable for these published norms.

Underestimation of quality control (QC) processes is one of the major factors leading to internal and external product failure, which have been reported to cause a loss of turnover between 10–30%. As a result, many different norms are put in place to support manufacturers with their QC process. However, time to result and the associated costs for chemicals can be quite excessive, leading many companies to implement near-infrared spectroscopy (NIRS) in their QC process. This paper illustrates the potential of NIRS and displays cost saving potentials up to 90%.

Electrochemical measurements utilizing a rotating cylinder electrode (RCE) are widely used in industrial corrosion applications when simulation of realistic pipe conditions are necessary in a lab environment. This white paper allows further insight into the particularities and parameters which govern the electrochemical measurements, in particular measurements performed in turbulent flow conditions, and shows a complete picture of the best practice use of this technique. The annexes provide an overview and short explanation of the parameters and laws specific to the fluid behavior in electrochemical cells with RCE.

«Dissolved oxygen» describes the amount of oxygen molecules (O2) which are dissolved in a liquid phase under certain conditions. In this white paper, two different methods for the analysis of dissolved oxygen, titration and direct measurement, are compared and contrasted to help analysts determine which method is more suitable for their specific applications. Here, we primarily focus on the determination of dissolved O2 in water. However, the same principle applies for other liquid phases such as non-alcoholic or alcoholic beverages.

The FOS/TAC value is an important characteristic to assess the status of the fermenter before costly problems arise. The new Eco Titrator from Metrohm allows the determination of this quotient in a fast, cost-efficient, and precise way.

With significant global viral outbreaks becoming the norm rather than generational outliers, it is imperative that fast, sensitive, and cost-effective testing is available to the masses. Screen-printed electrodes (SPEs) allow rapid, widespread testing of populations for infectious disease, without the need of skilled personnel or burdensome equipment in the field. The possibility of point-of-care (POC) testing with SPEs has been exhibited in several recent studies. Metrohm DropSens combines high production capabilites of custom-made SPEs with a valid ISO 13485 certification "Manufacturing of sensors for medical devices", meaning testing procedures developed on these SPEs can be reliably scaled up for larger operations, with easier regulatory approval for commercialization.

Rancidity of oils and fats is a factor which can immediately reduce the sale price of these products to customers in the food and cosmetics industries. Oils which remain stable over longer periods of time are more highly valued as they lead to a higher quality end product. Rancidity is a natural process which occurs as fats and oils age and oxidize, and can be delayed or even stopped by addition of antioxidants at the right time.Determination of rancidity is possible in several ways (e.g., measuring the acid number or peroxide value), though these tests only give information about the current state of the product, with no indication about the remaining shelf life. One analytical method that can measure this time span until spoilage is the Rancimat method, which artificially ages the samples to determine whether antioxidants may be needed to help manufacturers get the full value from their oils.

Nông nghiệp ở quy mô lớn mà không có phân bón không còn khả thi trong thế giới hiện đại. Để trồng đủ lượng nông sản cho gần 8 tỷ người cũng như cho vật nuôi và mục đích sử dụng công nghiệp, các loại phân bón có thành phần dinh dưỡng khác nhau có sẵn để đáp ứng nhu cầu riêng biệt của nhiều loại đất khác nhau. Thông tin về thành phần của phân bón (ví dụ: tổng nitơ, phốt pho và kali) có sẵn để giúp lựa chọn loại phân bón lý tưởng cho một loại đất cụ thể. Theo thông lệ, các thành phần này được xác định bằng phương pháp trọng lượng (ví dụ: phốt pho, kali hoặc sunfat) hoặc bằng ICP-OES (ví dụ: phốt pho hoặc kali). Các phương pháp này có nhược điểm là thời gian phân tích dài kết hợp với việc chuẩn bị mẫu tốn nhiều công sức (trọng lượng) hoặc yêu cầu thiết bị đắt tiền với chi phí vận hành cao (ICP-OES). Tài liệu này trình bày chi tiết cách chuẩn độ nhiệt là phương pháp thay thế nhanh và rẻ để cung cấp thông tin về hàm lượng các chất dinh dưỡng khác nhau trong các loại phân bón khác nhau.

Knowledge of the water content in lubricating oils, additives, and similar products is important in the manufacturing, purchase, sale, or transfer of petroleum products to help estimate their quality and performance characteristics. Monitoring the water content in such products can prevent damage to infrastructure and ensure safe operation by avoiding corrosion processes and subsequent engine wear. This White Paper explains the easy determination of moisture in petroleum samples by coulometric Karl Fischer titration according to the three procedures outlined in ASTM Method D6304. A comparison is given between the procedures to determine which is most suitable for different sample types.

Ion measurement can be conducted in several different ways, e.g., ion chromatography (IC), inductively coupled plasma optical emission spectrometry (ICP-OES), or atom absorption spectroscopy (AAS). Each of these are well-established, widely used methods in analytical laboratories. However, the initial costs are relatively high. In contrast, ion measurement by the use of an ion-selective electrode (ISE) is a promising alternative to these costly techniques. This White Paper explains the challenges which may be encountered when applying standard addition or direct measurement, and how to overcome them in order for analysts to gain more confidence with this type of analysis.

This white paper summarizes the steps involved in converting an existing manual titration procedure to semi-automated or automated titration procedures. It discusses topics such as selecting the right electrode and titration mode. For a better understanding, the discussion topics are illustrated with three examples.

Like any defense and security professional, border agents must quickly and accurately identify suspicious substances at the point of contact. When that substance is fentanyl, which is deadly in microdoses, the stakes are even higher. The Mira DS handheld Raman system from Metrohm Raman offers safe, no-contact identification of over 200 fentanyl analogues. Mira DS protects border agents, while they protect citizens from deadly narcotics, drug smugglers, and illegal entry of goods.

Sulfites are well-known additives in foods and beverages used to extend shelf life and preserve colors. Such properties have led to the broad usage of sulfites in a range of foodstuffs like fruits, cereals, vegetables, seafood, juices, alcoholic and non-alcoholic (soft) beverages, and in some meat products. The term «sulfites» describes a group of molecules that include sulfur dioxide (SO2) and chemically related molecules like sodium sulfite (Na2SO3), sodium bisulfite (NaHSO3), or sodium metabisulfite (Na2S2O5). Sulfite intake has been correlated with several adverse reactions, and therefore sulfites are included in the FAO/WHO Codex Alimentarius list. Labelling sulfite content in foods and beverages is necessary when the total concentration exceeds 10 mg/kg. Metrohm ion chromatography allows the reliable measurement of sulfite in different matrices using either conductivity or amperometric detection. The inclusion of automated sample preparation and cleaning steps with Metrohm instrumentation saves additional analyst time and helps increase sample throughput.

Ion chromatography mass spectrometry (IC-MS) is a powerful tool that can handle many challenging analytical tasks which cannot be performed adequately by IC alone. IC-MS is a robust, sensitive, and selective technique used for the determination of polar contaminants like inorganic anions, organic acids, haloacetic acids, oxyhalides, or alkali and alkaline earth metals. After separation of the sample components via IC, mass selective detection guarantees peak identity with low detection limits. The inclusion of automated Metrohm Inline Sample Preparation (MISP) allows not only water samples, but also chemicals, organic solvents, or post-explosion residues to be readily analyzed without need for extensive manual laboratory work. This White Paper explains the benefits of IC-MS over IC in certain cases, the hyphenation of IC and different MS systems, as well as related norms and standards.

The demand for microelectronics and printed circuit boards (PCBs) has steadily increased as more flat panel displays, LEDs, photovoltaics, and other essential intermediates are required to create modern consumer devices. This is favorable for the semiconductor industry, though challenges may arise to deliver on time while upholding high quality standards. To be successful, several processes must be optimized in order to increase production efficiency. This White Paper describes the capabilities of the modern analytical method near-infrared (NIR) spectroscopy for assessing the quality of acid baths for etching of microelectronics and printed electronics. Not only are analysis times sharply reduced to less than a minute, the related running costs are also significantly lower – certainly a boost in efficiency that should not be overlooked!

Mục đích của việc thẩm định quy trình phân tích là để chứng minh rằng nó phù hợp với mục đích sử dụng riêng. Các khuyến cáo về thẩm định phương pháp phân tích có thể được tìm thấy trong ICH Guidance Q2(R1) Validation of Analytical Procedures: Text and Methodology [1] và trong USP General Chapter <1225> Validation of Compendial Procedures. Mục đích của tài liệu này là để cung cấp một vài khuyến cáo về thẩm định phương pháp chuẩn độ.

In this White Paper, details of the electronic (PGSTAT) and electrochemical cell grounding are presented together with the necessity of using a floating PGSTAT for different application and experimental examples. Due to the wide variation of experimental requirements and kinds of electrochemical cells, the use of an electrochemical instrument with a selectable floating feature (such as VIONIC) which brings additional versatility to the user is recommended.

Handheld Raman is ever evolving. The combination of large libraries, a compact and easy-to-use system, and predictive Hazmat software make MIRA DS a powerful tool for defense and security professionals. Identify on-site materials, get hazard information, and make quick decisions about response to dangerous situations.

The fermentation of corn starch to produce ethanol is a complex biochemical process that requires monitoring of many different parameters (e.g., solids, pH, sugar profile, glycerol, lactic and acetic acid, and water and ethanol content). Traditional laboratory analysis using primary methods (e.g. Karl Fischer titration) takes about an hour to complete and is a limiting step for increasing plant capacity and efficiency. As a fast and non-destructive analytical technique, near-infrared spectroscopy (NIRS) can replace routine laboratory analysis, decreasing operating costs and increasing plant efficiency and capacity. This White Paper describes the capabilities of the modern analytical method near-infrared (NIR) spectroscopy for monitoring and improving the fermentation process of corn to ethanol.

Trong White Paper này, bạn sẽ tìm hiểu về MIRA XTR DS – hệ thống Raman cầm tay nhỏ nhất, thông minh nhất, linh hoạt nhất với các thư viện lớn nhất hiện có trên thị trường! MIRA XTR DS có tất cả các lợi ích định tính Raman 785 nm: kích thước nhỏ gọn, công suất laser thấp, bảo quản mẫu, tuổi thọ pin dài... giờ đây có khả năng loại bỏ huỳnh quang. Ngoài ra, độ nhạy và độ phân giải được cải thiện so với các hệ thống 1064 nm. Điều này mở ra những khả năng mới cho Raman 785 nm, bao gồm các vật liệu có màu đậm, tá dược thông thường, vật liệu bất hợp pháp, v.v.

It is widely accepted that prolonged exposure to hexavalent chromium compounds can have dire health effects. This has led to increased regulation of chromium-containing products and greater demand for technologies that can positively identify hexavalent chromium in potential matrices. These include paints, dyes, and primers, which can pose a problem for interrogation with Raman, as strongly colored materials often exhibit fluorescence when stimulated at 785 nm. Fluorescence can obscure the Raman signal and prevent positive identification. MIRA XTR DS provides all the functionality of handheld material ID with a new capability that selectively eXTRacts the Raman signal from fluorescent materials. Fluorescence rejection at 785 nm provides higher sensitivity and resolution than 1064 nm systems, as well as a much wider scope of applications amenable to Raman spectroscopy. MIRA XTR DS offers a comprehensive and versatile material ID test solution for field operations.

Haemophilus influenzae type B (Hib) is a major cause of bacterial meningitis in children in many countries. The capsular polysaccharide (PS) of Hib plays an important role in the virulence of the organism. The polysaccharide capsule hides cell surface components from elements of the mammalian immune system, such as antibodies and complement proteins that otherwise would activate mechanisms to kill the pathogen. Vaccines require rigorous characterization and assays to ensure final product quality and consistency. For glycoconjugate vaccines, it is important to measure both free and total PS to ensure the quality. A large amount of unconjugated PS may suppress immunity to the antigen. Additionally, the presence of free PS is a key indicator of process consistency. Current methods to determine PS content in vaccines such as Hib are imprecise and unreliable, especially if the vaccine contains a sugar stabilizer (e.g. lactose). Ion chromatography with pulsed amperometric detection (IC-PAD, or HPAEC-PAD) offers a simpler procedure and better sensitivity than other assays to quantify PS (here, polyribosylribitol phosphate [PRP]) in Hib vaccine.

Haloacetic acids (HAAs) are commonly produced as disinfection byproducts (DBPs) from water treatment processes. Some HAAs are regulated by the authorities and have been classified as potentially carcinogenic. They have traditionally been analyzed by gas chromatography (GC), a technique that requires time-consuming sample extraction and derivatization, leading to higher costs per analysis. Ion chromatography hyphenated to mass spectrometry (e.g., single or triple quadrupole MS systems) is a powerful tool that can handle many challenging analytical tasks such as measuring μg/L levels of HAAs in potable water samples. This White Paper explains the benefits of using this hyphenated technique for the accurate measurement of HAAs in potable water.

White paper on monitoring corrosion and the benefits of online or inline chemical analysis over manual sampling and offline laboratory methods for corrosion monitoring. Online and inline process application solutions for corrosion prevention with related application notes for further information are presented.

Free white paper gives comprehensive overview of how to reliably assess the quality of infant formula with ion chromatography.

Learn about PFAS, their impact on water quality, EU Directive 2020/2184, and the benefits of AOF measurement using combustion ion chromatography (CIC).

This White Paper introduces the principles of cyclic voltammetry (CV) and the various ways it can be used for catalyst investigation. A case study and helpful glossary are provided to support your understanding.

This White Paper introduces seamless measurements that are possible with VIONIC powered by INTELLO and applications that can benefit from this unique feature. The combination of software and new generation electronics provides data in real-time with no gaps or missed reactions.

Monitor adsorbable organic halogens (AOX) in water using combustion ion chromatography (CIC) for precise analysis of AOCl, AOBr, AOI, and total AOX.

This white paper presents IC-MS as powerful analysis technique. This multiparameter method determines various analytes such as inorganic cations and amines in one run.

White paper about Raman spectroscopy and electrochemistry and their combination (electrochemical Raman).

Lithium-ion batteries (LIBs) are the most common rechargeable options available today. Production of LIBs needs to follow stringent quality standards.

Voltammetry (VA) is a fast and established method for testing the remaining antioxidant content in industrial lubricants. The flexible and modular Metrohm VA system setup discussed in this White Paper delivers more repeatable and more reproducible results which fulfill all ASTM requirements. Additionally, users can automate the complete analysis process which makes it possible to run series of samples completely unattended.

This White Paper focuses on selected IC-MS applications for the straightforward identification and quantification of organic acids and inorganic anions in different matrices.

This White Paper presents four different «green» sensors: the scTRACE Gold, screen-printed electrodes, the glassy carbon electrode, and the Bi drop electrode from Metrohm that can be used to determine low concentrations of heavy metals in different sample matrices, such as boiler feed water, drinking water, and sea water.

With Hydranal™ NEXTGEN FA reagents, the water content in ketones can be determined quickly and reliably. Compared to other existing KF reagents for ketones on the market, the side reactions are measurably better suppressed.

The ASTM D8192 standard allows analysts to determine water hardness in different water matrices by complexometry with automated photometric endpoint recognition, increasing the reproducibility and the precision of the results.

This White Paper will walk you through the selection process of ion chromatography as the best analytical tool in the product development of a cell-based gene therapy.

The USP and FDA started to modernize several monographs and General Chapters. In many cases, IC-focused methods have replaced older, wet chemistry procedures. Learn more about the USP modernization initiative and the advantages of ion chromatography in this white paper.

This White Paper gives an overview of the energy-intensive nitrification process that converts ammonia into less harmful nitrogen compounds at wastewater treatment plants (WWTPs). It displays the results from a field test at a WWTP, showcasing the positive influence of single-method process analyzers on the efficiency of the nitrification process.

This White Paper discusses the concept and benefits of NIR spectroscopy and outlines several real-life laboratory application examples with the use of OMNIS NIRS, the cutting-edge NIR spectrometer from Metrohm.

Free White Paper outlines the fundamental principles of the nitrogen reduction reaction. It then delves into the technical barriers hindering the industrialization of green ammonia production, their impact on final yield and selectivity, and potential strategies or research gaps to overcome these issues.

Tài liệu White Paper này trình bày về USP <1225> và cách sắc ký ion được sử dụng để xác định hàm lượng hoạt chất trong các sản phẩm dược (các phép thử định lượng), cũng như nhận diện các tạp chất và hợp chất phân hủy.

OMNIS Client/Server nâng cao hiệu suất kinh doanh nhờ khả năng quản lý máy chủ linh hoạt, giúp cắt giảm chi phí thông qua giảm phần cứng, tiêu thụ năng lượng và bảo trì tại nhiều địa điểm.