Detektorer til IC

Overlegen fleksibilitet: Metrohms IC-systemer kan brukes med enhver deteksjonsmetode.

Viktige punkter

Metrohms IC-systemer kjennetegnes av et kompakt design og fleksible konfigurasjonsmuligheter. Dette gjelder også for våre detektorer.

Rutinemessig drift med konduktivitet, UV/VIS eller amperometrisk deteksjon
Omfattende analyse med fleksibel bruk av flere detektorer i serie eller som kombinasjonsteknikker
Kompatibilitet med MS og ICP/MS detektorer fra mange produsenter

Automatisering i IC analysen:Spar tid og penger med en fullautomatisert prøvepreparering og analyse

Fordeler

Overlegen fleksibilitet

Avhengig av applikasjonen, kan du bruke hvilken som helst deteksjonsmetode i IC-systemet. Hver deteksjonsmetode har sine spesielle fordeler med hensyn til selektivitet og følsomhet.

Oversikt over detektorer til Metrohm IC
Detector option	Benefits	Typical applications
Conductivity detection	Benefits: Universal detector for wide application field Maintenance free Non-destructive detection	Applications: Anions, cations, amines (Metrohm Suppressor Module available for more sensitive analysis)
UV/VIS detection	Benefits: Straightforward quantification of UV- and VIS-active substances across the entire UV/VIS range Maximum performance by flexible settings (wavelength, lamps, measuring channels) Upgradeable by iReactor for pre- and postcolumn derivatization Highly specific and sensitive, making even low-level detection possible	Applications: Direct UV/VIS detection: nitrogen and sulfur compounds, halogens, organic substances With post-column derivatization: transition metals, oxyanions as bromate and chromate in very low concentrations, amino acids, ammonium, etc. With pre-column derivatization: complexing agents as EDTA, NTA, PBTC
Amperometric detection	Benefits: Determination of electroactive, i.e., oxidizable or reducible, compounds. High selectivity and sensitivity for determination of concentrations down to the ng/L range.	Applications: Carbohydrates Sugar alcohols of all kinds Many anions (e.g., cyanide, sulfide, iodide, bromide) Many anions (e.g., cyanide, sulfide, iodide, bromide) Many cations (e.g., amines, aromatic amino acids) Organic substances (e.g., phenols, catecholamines, vitamins)
Hyphenated mass detectors	Benefits: High sensitivity and specificity Simultaneous analysis possible Peak verification and identification	Applications: Speciation of (trace) metals and metaloids (As, Hg, Se; IC-ICP/MS) Quantification and profiling for carbohydrates (IC-MS, IC-MS/MS) Organic molecules, e.g., amines (IC-MS, IC-MS/MS) Pesticides, e.g., glyphosate, AMPA (IC-MS, IC-MS/MS) Halogens and halogenated compounds, e.g., perchlorate, bromate, haloacetic acids (IC-MS, IC-MS/MS)

Brochure: 947 Professional UV/VIS Detector Vario / 943 Professional Reactor Vario / 943 Professional Thermostat Vario – UV/VIS detection: an alternative detection method in ion chromatography (8.947.5000, PDF, 1.5 MB)

Brochure: Suppression in anion chromatography – More sensitive analysis of anions and organic acids (8.000.5134, PDF, 1.2 MB)

Brochure: Cation suppression in ion chromatography – Cation determination in the trace range (8.000.5163, PDF, 1.5 MB)

Systemer

947 Professional UV/VIS Detector Vario SW

2.947.0010

As an intelligent, single-wavelength detector, the 947 Professional UV/VIS Detector Vario SW permits a secure and reliable quantification of substances active in the ultraviolet or visible range. One wavelength can be selected.

947 Professional UV/VIS Detector Vario MW

2.947.0020

As an intelligent. multi-wavelength detector, the 947 Professional UV/VIS Detector Vario MW permits a secure and reliable quantification of substances active in the ultraviolet or visible range. Up to eight wavelengths can be freely selected. A diode array is used for detection.

945 Professional Detector Vario – Conductivity

2.945.0010

Intelligent stand-alone detector equipped with a high-performance IC Conductivity Detector. For use with intelligent IC instruments or as independent conductivity detector.

945 Professional Detector Vario – Amperometry

2.945.0020

Intelligent stand-alone detector equipped with the IC Amperometric Detector. Outstanding selectivity due to the four measuring modes: DC, PAD, flexIPAD, CV. The excellent signal/noise ratio and the very fast start-up guarantee the highest in measurement precision. For use with intelligent IC instruments or as independent detector.

945 Professional Detector Vario – Conductivity & Amperometry

2.945.0030

Intelligent stand-alone detector equipped with the high performance IC Conductivity Detector and the IC Amperometric Detector, with the four measuring modes DC, PAD, flexIPAD and CV. For use with intelligent IC instruments or as independent detector for conductivity and amperometric detection.

IC Conductivity Detector

2.850.9010

Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.

IC Amperometric Detector

2.850.9110

Compact and intelligent amperometric detector for intelligent IC instruments. Outstanding selectivity due to the four measuring modes: DC, PAD, flexIPAD and CV, as well as the excellent signal/noise ratio and the very fast stabilization of the measuring signal guarantee the highest in measurement precision.

IC Conductivity Detector MB

2.850.9020

Compact and intelligent high performance conductivity detector for intelligent IC instruments. Optimized for microbore columns. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.Typical areas of application:Anion or cation determinations with chemical suppression, sequential suppression or without suppression and conductivity detection; Optimized for microbore (2 mm) applications, ideally suitable for coupling techniques (IC-MS or IC-ICP/MS); Specification at a glance:0–15000 μS/cm without range switching; Cell volume: 0.3 μL; Ring-shaped electrodes made of stainless steel X2CrNiMo17-12-2 (316 L), compatible with MSA; Maximum operating pressure: 10.0 MPa (100 bar); Cell temperature: 20–50 °C in increments of 5 °C; Temperature stability: 0.001 °C; Baseline noise: 0.2 nS/cm typical for sequential suppression; Capillaries: ID 0.18 mm; Supported with MagIC Net 4.1 and higher

1 / 8

Se alle systemer (8)

Er du på utkikk etter en IC ?

Ta kontakt med Metrohm Nordic for å få hjelp til å finne det optimale systemet

E-post