Pick&Place module with stirrer
2.1014.0110
- Genel özellikler
Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. The built-in magnetic stirrer makes it possible to analyze samples that were prepared externally on a magnetic agitator directly in the Sample Robot without having to remove the magnetic stirring bar beforehand. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses.
Daha yakından tanıyın Pick&Place module with stirrer
OMNIS otomasyonu
Daha hızlı, daha akıllı ve daha güvenilir titrasyon sonuçları için el değmeden otomasyonNeden? OMNIS otomasyonu?
Ekipmanlar Size özel Pick&Place module with stirrer
Aksesuarlar PDF dosyasını indir
Aksesuarlar PDF dosyasını indir- Dahili parçalar
- Opsiyonel parçalar
Silicone tubing 8/12 2.5 m
6.01803.000
Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
Tubing clip to workstation (10 pcs)
6.02704.000
For fixing in place the PVC or PTFE tubing that leads to the workstation.
Tubing and cable guide
6.02705.000
For organizing tubing and cables between Pick&Place module and titrator
Safety shield for Pick&Place module
6.02700.000
Safety shield for Pick&Place modules
Daha fazlası
