You have been redirected to your local version of the requested page

Lead is commonly used as stabilizer in electroless nickel plating processes. The regular and precise determination of the electrochemically active Pb2+ concentration is essential to keep the plating process running optimally under stable conditions. 

Electroless nickel plating is used in various industrial production processes (e.g., production of hard disks, or as protection against corrosion or wear). The ENIG (electroless nickel, immersion gold) and ENEPIG (electroless nickel, electroless palladium, immersion gold) processes in the production of printed circuit boards (PCB) are very reliant on the success of this method as electroless nickel plating is the first step in the process. Reducing the amount of out-of-specification product due to plating errors can save manufacturers significant costs. 

Differential pulse anodic stripping voltammetry can be used to determine the active lead content after dilution. The voltammetric determination has been established as a straightforward, sensitive, selective, and interference-free method for this application. 

Electroless nickel plating bath  

884 Professional VA.
Figure 1. 884 Professional VA.

After diluting the sample in supporting electrolyte, the polarographic determination of lead is carried out on the 884 Professional VA with the Multi-Mode Electrode pro as working electrode using the parameters listed in Table 1. The concentration of lead is determined by two additions of Pb standard addition solution. 

Table 1. Parameters for the Pb determination
Parameter Setting
Working electrode  HMDE
Mode DP – Differential Pulse
Deposition potential -0.6 V
Deposition time 90 s 
Start potential -0.6 V
End potential  -0.35 V to -0.25 V 
Peak potential Pb  -0.4 V to -0.44 V
  • Working electrode: Multi-Mode Electrode pro with silanized glass capillaries
  • Reference electrode: Ag/AgCl/KCl (3 mol/L) reference electrode with electrolyte vessel. Bridge electrolyte: KCl (3 mol/L) 
  • Auxiliary electrode: Platinum rod electrode 
Determination of Pb2+ in electroless nickel bath with two standard additions.
Figure 2. Determination of Pb2+ in electroless nickel bath with two standard additions.

The determination of Pb2+ in electroless nickel plating baths can be carried out in a simple and straightforward manner. The method is selective and free of interferences. It is suitable for concentrations in the low to mid mg/L range in the electroless nickel bath. 

Table 2. Result
Sample Concentration Pb2+ [mg/L] 
Electroless nickel bath  1.1
Contato

Metrohm Brasil

Rua Minerva, 161
05007-030 São Paulo

Contato

Internal references: AW DE4-0226-122009; AW DE4-0166-112004