874 Oven Sample Processor専用バイアル
2.874.0130
874 Oven Sample Processor専用バイアル
ja
2.874.0130
-
- Heating tube stopper
- 6.1446.170
- for coulometric KF vessels in connection with heatable tubing connection
- for coulometric KF vessels in connection with heatable tubing connection
- PCS
- 1
- Drying flask cap
- 6.1602.145
- Screw cap with GL 45 thread for the 6.1608.050 drying flask.
- <p>Screw cap with GL 45 thread for the 6.1608.050 drying flask.</p>
- PCS
- 2
- Drying bottle / 100 mL / GL 45
- 6.1608.050
- PCS
- 2
- FEP tubing / M6 / 13 cm
- 6.1805.010
- With light and kink protection.
- With light and kink protection.
- PCS
- 2
- FEP tubing / M6 / 18 cm
- 6.1805.050
- With light and kink protection
- With light and kink protection
- PCS
- 1
- FEP tubing / M6 / 44 cm
- 6.1805.470
- With light and kink protection
- With light and kink protection
- PCS
- 1
- Thread adapter M6 outer / M8 inner
- 6.1808.040
- Outer thread M6, inner thread M8.
- Outer thread M6, inner thread M8.
- PCS
- 1
- Tubing adapter olive / M8 outer
- 6.1808.050
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- PCS
- 1
- Filter tube
- 6.1821.040
- Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.
- Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.
- PCS
- 2
- 加熱チューブ
- 6.1830.030
- 860 KF Thermoprep、885 Compact Oven Sample Processor、874 USB Oven Sample Processor に連結するスレッド M6 を有する加熱チューブ。
- <p>860 KF Thermoprep、885 Compact Oven Sample Processor、874 USB Oven Sample Processor に連結するスレッド M6 を有する加熱チューブ。</p>
- PCS
- 1
- Clamping ring
- 6.2013.010
- For support rods with a diameter of 10 mm.
- <p>For support rods with a diameter of 10 mm.</p>
- PCS
- 1
- Cable clip
- 6.2053.000
- Cable clip for fastening cables and tubes
- Cable clip for fastening cables and tubes
- PCS
- 1
- Sample holder
- 6.2063.020
- Sample holder for 6 mL sample vials (6.2419.000), for 874
- Sample holder for 6 mL sample vials (6.2419.000), for 874
- PCS
- 1
- Cable USB A – mini-DIN 8-pin
- 6.2151.000
- Controller cable
- Controller cable
- PCS
- 1
- 3 mm hex key for IC Sample Processors
- 6.2621.100
- PCS
- 1
- Hexagon key 2 mm
- 6.2621.130
- 2 mm.
- 2 mm.
- PCS
- 1
- Hexagon key 2.5 mm
- 6.2621.140
- PCS
- 1
- Oven insert
- 6.2627.010
- Used with 874 USB Oven Sample Processor
- Used with 874 USB Oven Sample Processor
- PCS
- 1
- Dust filter
- 6.2724.010
- Dust filter for Rancimats and Karl Fischer ovens.
- Dust filter for Rancimats and Karl Fischer ovens.
- PCS
- 1
- Wrench
- 6.2739.000
- For tightening connectors
- For tightening connectors
- PCS
- 1
- Safety shield
- 6.2751.140
- Safety shield for 874 USB Oven Sample Processor, made of PMMA.
- <p>Safety shield for 874 USB Oven Sample Processor, made of PMMA.</p>
- PCS
- 1
- Molecular sieve
- 6.2811.000
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- PCS
- 1
- 穿刺針
- 6.2816.070
- カールフィッシャーオーブンと共に使用。
- カールフィッシャーオーブンと共に使用。
- PCS
- 1
- Outlet needle
- 6.2816.080
- Used with KF Thermoprep and Oven Sample Processor.
- Used with KF Thermoprep and Oven Sample Processor.
- PCS
- 1
-
- 874 Oven Sample Processor
- 1.874.0010
- 874 オーブンサンプルプロセッサはカールフィッシャー水分測定のサンプルの加熱自動前処理に使用されます。水分気化法は特に、高温下においてはじめて水分が気化するサンプルや、難溶性のサンプル、カールフィッシャー試薬に反応するサンプルに適しています。
- <p>874 オーブンサンプルプロセッサはカールフィッシャー水分測定のサンプルの加熱自動前処理に使用されます。水分気化法は特に、高温下においてはじめて水分が気化するサンプルや、難溶性のサンプル、カールフィッシャー試薬に反応するサンプルに適しています。</p>
- PCS
- 1
- Heating tube stopper
- 6.1446.170
- for coulometric KF vessels in connection with heatable tubing connection
- for coulometric KF vessels in connection with heatable tubing connection
- PCS
- 1
- Drying flask cap
- 6.1602.145
- Screw cap with GL 45 thread for the 6.1608.050 drying flask.
- <p>Screw cap with GL 45 thread for the 6.1608.050 drying flask.</p>
- PCS
- 2
- Drying bottle / 100 mL / GL 45
- 6.1608.050
- PCS
- 2
- FEP tubing / M6 / 13 cm
- 6.1805.010
- With light and kink protection.
- With light and kink protection.
- PCS
- 2
- FEP tubing / M6 / 18 cm
- 6.1805.050
- With light and kink protection
- With light and kink protection
- PCS
- 1
- FEP tubing / M6 / 44 cm
- 6.1805.470
- With light and kink protection
- With light and kink protection
- PCS
- 1
- Thread adapter M6 outer / M8 inner
- 6.1808.040
- Outer thread M6, inner thread M8.
- Outer thread M6, inner thread M8.
- PCS
- 1
- Tubing adapter olive / M8 outer
- 6.1808.050
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- 1 M8 outer thread and 1 tubing olive. E.g. for thermostat jacket of exchange units and stability measuring instruments.
- PCS
- 1
- Filter tube
- 6.1821.040
- Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.
- Filter tube for 6.1608.050 Drying bottle. For Rancimats and Karl Fischer ovens.
- PCS
- 2
- 加熱チューブ
- 6.1830.030
- 860 KF Thermoprep、885 Compact Oven Sample Processor、874 USB Oven Sample Processor に連結するスレッド M6 を有する加熱チューブ。
- <p>860 KF Thermoprep、885 Compact Oven Sample Processor、874 USB Oven Sample Processor に連結するスレッド M6 を有する加熱チューブ。</p>
- PCS
- 1
- Clamping ring
- 6.2013.010
- For support rods with a diameter of 10 mm.
- <p>For support rods with a diameter of 10 mm.</p>
- PCS
- 1
- Cable clip
- 6.2053.000
- Cable clip for fastening cables and tubes
- Cable clip for fastening cables and tubes
- PCS
- 1
- Sample holder
- 6.2063.020
- Sample holder for 6 mL sample vials (6.2419.000), for 874
- Sample holder for 6 mL sample vials (6.2419.000), for 874
- PCS
- 1
- Cable USB A – mini-DIN 8-pin
- 6.2151.000
- Controller cable
- Controller cable
- PCS
- 1
- 3 mm hex key for IC Sample Processors
- 6.2621.100
- PCS
- 1
- Hexagon key 2 mm
- 6.2621.130
- 2 mm.
- 2 mm.
- PCS
- 1
- Hexagon key 2.5 mm
- 6.2621.140
- PCS
- 1
- Oven insert
- 6.2627.010
- Used with 874 USB Oven Sample Processor
- Used with 874 USB Oven Sample Processor
- PCS
- 1
- Dust filter
- 6.2724.010
- Dust filter for Rancimats and Karl Fischer ovens.
- Dust filter for Rancimats and Karl Fischer ovens.
- PCS
- 1
- Wrench
- 6.2739.000
- For tightening connectors
- For tightening connectors
- PCS
- 1
- Safety shield
- 6.2751.140
- Safety shield for 874 USB Oven Sample Processor, made of PMMA.
- <p>Safety shield for 874 USB Oven Sample Processor, made of PMMA.</p>
- PCS
- 1
- Molecular sieve
- 6.2811.000
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- Molecular sieve. Bottle containing 250 g. Pore size: 0.3 nm. Without moisture indicator. For Rancimats and Karl Fischer instruments.
- PCS
- 1
- 穿刺針
- 6.2816.070
- カールフィッシャーオーブンと共に使用。
- カールフィッシャーオーブンと共に使用。
- PCS
- 1
- Outlet needle
- 6.2816.080
- Used with KF Thermoprep and Oven Sample Processor.
- Used with KF Thermoprep and Oven Sample Processor.
- PCS
- 1
-
- 800 Dosino
- 2.800.0010
- 800 Dosino 高機能電動ビュレットのドージングユニット用書き込み・読み取り用ハードウェア付き駆動部。固定されたケーブル付き (長さ150 cm)。
- <p>800 Dosino 高機能電動ビュレットのドージングユニット用書き込み・読み取り用ハードウェア付き駆動部。固定されたケーブル付き (長さ150 cm)。</p>
- PCS
- 1
- 801 Stirrer
- 2.801.0010
- Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).
- <p>Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).</p>
- PCS
- 1
- 851 Titrando(2液型電極付き)
- 2.851.0010
- クーロメーター(2液型電極、801 Stirrer付き)。トレースレベル (水の絶対量10 µg~10 mg) の水分測定において、クーロメトリーは液体、固体、気体中での水分測定に理想的なメソッドです。更にクーロメトリーは絶対メソッドなので、試薬ファクター測定の必要がありません。851 Titrandoにより、電量滴定を容易かつ迅速に行うことができます。推奨測定範囲: 水の絶対量10 µg~200 mgOMNISソフトウェア、tiamoソフトウェアもしくはTouch Controlを適用。GMP/GLP基準およびFDA 基準21 CFR Part 11の要件を満たしています(必要な場合)
- <p><strong>クーロメーター(2液型電極、801 Stirrer付き)。</strong></p><p>トレースレベル (水の絶対量10 µg~10 mg) の水分測定において、クーロメトリーは液体、固体、気体中での水分測定に理想的なメソッドです。更にクーロメトリーは絶対メソッドなので、試薬ファクター測定の必要がありません。</p><p><strong>851 Titrando</strong>により、電量滴定を容易かつ迅速に行うことができます。</p><p>推奨測定範囲: 水の絶対量10 µg~200 mg</p><p>OMNISソフトウェア、tiamoソフトウェアもしくはTouch Controlを適用。GMP/GLP基準およびFDA 基準21 CFR Part 11の要件を満たしています(必要な場合)</p>
- PCS
- 1
- 851 Titrando(1液型電極付き)
- 2.851.0110
- クーロメーター(1液型電極付き)。トレースレベル (水の絶対量10 µg~10 mg) の水分測定において、クーロメトリーは液体、固体、気体中での水分測定に理想的なメソッドです。更にクーロメトリーは絶対メソッドなので、試薬ファクター測定の必要がありません。851 Titrandoにより、電量滴定を容易かつ迅速に行うことができます。推奨測定範囲: 水の絶対量10 µg~200 mg。OMNISソフトウェア、tiamoソフトウェアもしくはTouch Controlを適用。GMP/GLP基準およびFDA 基準21 CFR Part 11の要件を満たしています (必要な場合)。
- <p><strong>クーロメーター(1液型電極付き)。</strong></p><p>トレースレベル (水の絶対量10 µg~10 mg) の水分測定において、クーロメトリーは液体、固体、気体中での水分測定に理想的なメソッドです。更にクーロメトリーは絶対メソッドなので、試薬ファクター測定の必要がありません。</p><p><strong>851 Titrando</strong>により、電量滴定を容易かつ迅速に行うことができます。</p><p>推奨測定範囲: 水の絶対量10 µg~200 mg。</p><p>OMNISソフトウェア、tiamoソフトウェアもしくはTouch Controlを適用。GMP/GLP基準およびFDA 基準21 CFR Part 11の要件を満たしています (必要な場合)。</p>
- PCS
- 1
- 852 Titrando(2液型電極付き)
- 2.852.0050
- クーロメーター(2液型電極、801 Stirrer、完全な容量滴定セル付き)。トレースレベル (水の絶対量10 µg~10 mg) の水分測定において、クーロメトリーは液体、固体、気体中での水分測定に理想的なメソッドです。更にクーロメトリーは絶対メソッドなので、試薬ファクター測定の必要がありません。クーロメトリーで推奨される測定範囲: 水の絶対量10 µg~200 mg852 Titrandoでは電量滴定の他に容量滴定によるカール フィッシャー滴定も可能です。OMNISソフトウェア、tiamoソフトウェアもしくはTouch Controlを適用。GMP/GLP基準およびFDA 基準21 CFR Part 11の要件を満たしています (必要な場合)。
- <p><strong>クーロメーター(2液型電極、801 Stirrer、完全な容量滴定セル付き)。</strong></p><p>トレースレベル (水の絶対量10 µg~10 mg) の水分測定において、クーロメトリーは液体、固体、気体中での水分測定に理想的なメソッドです。更にクーロメトリーは絶対メソッドなので、試薬ファクター測定の必要がありません。</p><p>クーロメトリーで推奨される測定範囲: 水の絶対量10 µg~200 mg</p><p><strong>852 Titrando</strong>では電量滴定の他に容量滴定によるカール フィッシャー滴定も可能です。</p><p>OMNISソフトウェア、tiamoソフトウェアもしくはTouch Controlを適用。GMP/GLP基準およびFDA 基準21 CFR Part 11の要件を満たしています (必要な場合)。</p>
- PCS
- 1
- 852 Titrando(1液型電極付き)
- 2.852.0150
- クーロメーター(1液型電極付き、完全な容量滴定セルなし)トレースレベル (水の絶対量10 µg~10 mg) の水分測定において、クーロメトリーは液体、固体、気体中での水分測定に理想的なメソッドです。更にクーロメトリーは絶対メソッドなので、試薬ファクター測定の必要がありません。クーロメトリーで推奨される測定範囲: 水の絶対量10 µg~200 mg。852 Titrandoでは電量滴定の他に容量滴定によるカール フィッシャー滴定も可能です。OMNISソフトウェア、tiamoソフトウェアもしくはTouch Controlを適用。GMP/GLP基準およびFDA 基準21 CFR Part 11の要件を満たしています (必要な場合)。
- <p><strong>クーロメーター(1液型電極付き、完全な容量滴定セルなし)</strong></p><p>トレースレベル (水の絶対量10 µg~10 mg) の水分測定において、クーロメトリーは液体、固体、気体中での水分測定に理想的なメソッドです。更にクーロメトリーは絶対メソッドなので、試薬ファクター測定の必要がありません。</p><p>クーロメトリーで推奨される測定範囲: 水の絶対量10 µg~200 mg。</p><p><strong>852 Titrando</strong>では電量滴定の他に容量滴定によるカール フィッシャー滴定も可能です。</p><p>OMNISソフトウェア、<em>tiamo</em>ソフトウェアもしくはTouch Controlを適用。GMP/GLP基準およびFDA 基準21 CFR Part 11の要件を満たしています (必要な場合)。</p>
- PCS
- 1
- サンプルラック 36 x 6 mL、(アルミニウム製)
- 6.2041.720
- 36個のサンプル容器に適した 874 Oven Sample Processor のためのサンプルラック。以下のサンプル容器を使用することができます: 6.2419.000。材質: アルミニウム (Al)
- <p>36個のサンプル容器に適した 874 Oven Sample Processor のためのサンプルラック。以下のサンプル容器を使用することができます: 6.2419.000。</p><p>材質: アルミニウム (Al)</p>
- PCS
- 1
- サンプルラック 25 x 2-30 mL、(アルミニウム製)
- 6.2041.730
- 25 個のサンプル容器に適した 874 Oven Sample Processor のためのサンプルラック。以下のサンプル容器を使用することができます: サンプル容器(直径16~32.4 mm)。材質: アルミニウム (Al)
- <p>25 個のサンプル容器に適した 874 Oven Sample Processor のためのサンプルラック。以下のサンプル容器を使用することができます: サンプル容器(直径16~32.4 mm)。</p><p>材質: アルミニウム (Al)</p>
- PCS
- 1
- Needle holder with Luer lock
- 6.2049.040
- Needle holder (58 mm) with Luer lock for the Karl Fischer ovens 860, 874 and 885.
- <p>Needle holder (58 mm) with Luer lock for the Karl Fischer ovens 860, 874 and 885.</p>
- PCS
- 1
- Needle holder with Luer lock
- 6.2049.050
- Needle holder (73 mm) with Luer lock for the Karl Fischer ovens 860, 874 and 885.
- <p>Needle holder (73 mm) with Luer lock for the Karl Fischer ovens 860, 874 and 885.</p>
- PCS
- 1
- 807 Dosing Unit 2 mL
- 6.3032.120
- 807 Dosing Unit、2 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、2 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- 807 Dosing Unit 5 mL
- 6.3032.150
- 807 Dosing Unit、5 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、5 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- 807 Dosing Unit 10 mL
- 6.3032.210
- 807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、10 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- 807 Dosing Unit 20 mL
- 6.3032.220
- 807 Dosing Unit、20 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、20 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- 807 Dosing Unit 50 mL
- 6.3032.250
- 807 Dosing Unit、50 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。
- <p>807 Dosing Unit、50 mL ガラスシリンダーおよび遮光機能付き統合型データチップ付き、ISO/DIN ガラスネジ規格 GL 45 で試薬ボトルに取り付け可能。FEP チューブ接続部、反拡散チップ。</p>
- PCS
- 1
- Measuring equipment for checking the temperature
- 6.5618.000
- Measuring equipment for checking the temperature of 774 Oven Sample Processor, 832, 860 Thermoprep.
- Measuring equipment for checking the temperature of 774 Oven Sample Processor, 832, 860 Thermoprep.
- PCS
- 1