2.1056.0510

The OMNIS Column Holder Unit functions as an intelligent column holder in the OMNIS IC System, upon which a separation column with guard column can be fastened. The OMNIS Column Holder Unit has a column holder with chip contacts to fasten the column. The other end of the column is supported on a clip on the fixation bar. The memory chip enables column recognition by the software and the reading of data, e.g., the number of injections, production data (product number, serial number), etc.Find here the matching column for your OMNIS IC application: Column Finder

A629281130

The NIRS Analyzer Pro is a single point process analysis system based on high resolution diode array technology. It provides non-destructive analysis of solids like granules and powders. This system is typically mounted above a conveyor belt in order to analyze products passing by. Fast moving, uneven surfaces are able to be analyzed easily with this configuration.

2.1056.0520

The OMNIS Column Thermostat Unit 1 functions as an intelligent column thermostat with removable column tray in the OMNIS IC System. With the aid of the installed Peltier technology, which functions without fans, the thermostat can cause heating as well as cooling, and ensures a stable baseline. The horizontal installation as column tray enables simple installation and removal of the column and thus facilitates column replacement. The column is fastened to and stowed on the column tray. The column is fastened to the intelligent memory chip which enables the reading of important column parameters, e.g., number of injections or production data (product number, serial number).The column thermostat regulates the temperature for the separation columns and the eluent, thereby providing stable measuring conditions. The eluent in the preheating cartridge is preheated or cooled to the defined temperature to avoid temperature fluctuations within the separation column. In the OMNIS Column Thermostat Unit, up to 2 columns can not only be heated but also cooled. The Column Thermostat Unit 1 is equipped for operation with 1 column. It can however be retrofitted with a second preheating capillary for a second column.For multiple temperature zones, additional OMNIS Column Thermostat Units can be installed in further OMNIS Extension Modules.The OMNIS Column Thermostat Unit 1 has a leak sensor and an external overflow. Leakages are thus detected immediately and the escaped liquid is discharged without damage to the OMNIS IC System. Find here the matching column for your OMNIS IC application: Column Finder.Specifications:Temperature range: 5 to 80 °C; Temperature resolution (adjustable): 1 °C; Minimum temperature: 5 °C; Maximum temperature: 80 °C; Heating time: 5 min (from 25 °C to 50 °C); Cooling time: 14 min (from 50 °C to 25 °C); Temperature stability: 0.05 °C; Temperature reproducibility: 0.2 °C;

2.1056.0530

The OMNIS Column Thermostat Unit 2 functions as an intelligent column thermostat with removable column tray in the OMNIS IC System. With the aid of the installed Peltier technology, which functions without fans, the thermostat can cause heating as well as cooling, and ensures a stable baseline. The horizontal installation as column tray enables simple installation and removal of the column and thus facilitates column replacement.The column is fastened to and stowed on the column tray. The column is fastened to the intelligent memory chip which enables the reading of important column parameters, e.g., number of injections or production data (product number, serial number).The column thermostat regulates the temperature for the separation columns and the eluent, thereby providing stable measuring conditions. The eluent in the preheating cartridge is preheated or cooled to the defined temperature to avoid temperature fluctuations within the separation column. In the OMNIS Column Thermostat Unit, up to 2 columns can not only be heated but also cooled.The Column Thermostat Unit 2 is equipped for operation with 2 columns. For multiple temperature zones, additional OMNIS Column Thermostat Units can be installed in further OMNIS Extension Modules.The OMNIS Column Thermostat Unit 2 has a leak sensor and an external overflow. Leakages are thus detected immediately and the escaped liquid is discharged without damage to the OMNIS IC System. Find here the matching column for your OMNIS IC application: Column Finder.Specifications:Temperature range: 5 to 80 °C; Temperature resolution (adjustable): 1 °C; Minimum temperature: 5 °C; Maximum temperature: 80 °C; Heating time: 5 min (from 25 °C to 50 °C); Cooling time: 14 min (from 50 °C to 25 °C); Temperature stability: 0.05 °C; Temperature reproducibility: 0.2 °C;

2.1056.1110

The OMNIS MISP Unit acts as a holder and pullout for the accessories of the various Metrohm inline sample preparation techniques (Metrohm Inline Sample Preparation "MISP") and liquid handling processes. The innovative pull-out design makes it easy to insert or change accessories. As a result, they are stored in an orderly and space-saving way and integrated in the flow path.With the corresponding accessories, the following Metrohm inline sample preparation techniques can be carried out with the OMNIS MISP Unit:Metrohm Inline Ultrafiltration (UF); Metrohm Inline Dilution (MIDT); Metrohm inline dilution in combination with Metrohm inline ultrafiltration (MIDT-UF); Metrohm Inline Dialysis; Metrohm intelligent Partial Loop injection Technique (MiPT); Metrohm inline ultrafiltration and Metrohm intelligent Partial Loop injection Technique in combination (UF-MiPT); Metrohm intelligent Preconcentration Technique (MiPCT); Metrohm intelligent Preconcentration Technique with matrix elimination (MiPCT-ME); Metrohm intelligent Pick-up injection Technique (MiPuT); Metrohm Inline Neutralization and Metrohm Inline Cation Removal; Metrohm intelligent Preconcentration Technique with inline neutralization (MiPCT-NE); Ultrafiltration or dialysis cell, transfer tubings or transfer capillaries can be used in the OMNIS MISP Unit. All trap columns available from Metrohm can be mounted with the optional MISP holder. Various connectors can be fastened to the optional MISP base plate and integrated into the flow path.

2.921.1610

Robust, flexible measurement system for the quality control of solid and liquid substances. The NIRS XDS SmartProbe Analyzer enables rapid, nondestructive analyses of solid and liquid substances and formulations. With the NIRS XDS SmartProbe Analyzer, the identity and quality of a substance can be determined directly in the respective original transport containers, no matter whether it be bottles, bags or other containers. The design, which is just as robust as it is ergonomic, makes the NIRS XDS SmartProbe Analyzer the ideal quality control solution, both in the warehouse and in the laboratory. Using the NIRS XDS SmartProbe Analyzer could not be easier. The measurement is taken by holding the probe in the sample and pressing the measurement button. Pass/fail results can be read off on the handle immediately after the measurement.The XDS SmartProbe Analyzer is also available with a 3 m fiber length (order number: 2.921.1620)

2.949.0220

The 949 pH Meter is the perfect tabletop pH meter for quick and precise pH measurements. Ideal for laboratories, research institutes and industrial environments where pH analyses are performed regularly.Complete tabletop pH measuring instrument with color display; Measures pH, mV, and ORP with temperature display for comprehensive analyses; Simple pH calibration with Metrohm, USA, and NIST buffers up to 3 points or by user-defined 2-point calibration; Display of the calibrated values with symbols for clear readability; Signals measurement stability and offers the option of selecting between 3 stability criteria for reliable results; In conformance with GLP with embedded date and time; Display of calibration data and setting of the calibration deadline; Solitrode with stable plastic shaft for long-lasting use; Included in the package are the 949 pH Meter, the electrode holder, the power supply unit, and the Solitrode with Pt1000 with fixed cable for simple and immediate use.

2.1056.0120

The OMNIS Degasser Unit 2-Channel is used for the automated removal of dissolved gases and air bubbles from eluents and samples in the OMNIS IC System. The degassing of the eluent ensures a stable baseline and thus enhances the precision of the chromatographic measurement. For samples with a high gas content, the integrated sample degasser ensures that a constant sample volume enters the sample loop with each injection. This improves the reproducibility of the analysis significantly, and manual degassing is omitted in its entirety.The OMNIS Degasser Unit is integrated in space-saving fashion in the OMNIS Extension Module. The OMNIS Degasser Unit 2-Channel can be expanded to comprise 3 or 4 chambers. The Degasser Unit can at this time be equipped with either up to 4 eluent degassers (4 chambers) or with 1 sample degasser and up to 3 eluent degassers.Specifications:Time to establish vacuum: 10 s; Degassing efficiency: > 150 µL air / min at 1 mL/min; Resistance against solvents: No restrictions (except PFC); Expandable: Yes, up to 4 channels; Flow path: Free of metal;

2.1056.0110

The OMNIS Degasser Unit 1-Channel is used for the automated removal of dissolved gases and air bubbles from eluents and samples in the OMNIS IC System. The degassing of the eluent ensures a stable baseline and thus enhances the precision of the chromatographic measurement. For samples with a high gas content, the integrated sample degasser ensures that a constant sample volume enters the sample loop with each injection. This improves the reproducibility of the analysis significantly, and manual degassing is omitted in its entirety. Thanks to the new technical Film Degassing Chamber concept, thee OMNIS Degasser Unit is considerably more efficient.The OMNIS Degasser Unit is integrated in space-saving fashion in the OMNIS Extension Module. The OMNIS Degasser Unit 1-Channel can be expanded to comprise 2, 3 or 4 chambers. The Degasser Unit can at this time be equipped with either up to 4 eluent degassers (4 chambers) or with 1 sample degasser and up to 3 eluent degassers.Specifications:Time to establish vacuum: 10 s; Degassing efficiency: > 150 µL air / min at 1 mL/min; Resistance against solvents: No restrictions (except PFC); Expandable: Yes, up to 4 channels; Flow path: Free of metal;

2.1054.0010

The OMNIS IC Autosampler automates the sample change in the OMNIS IC System and enables efficient processing of up to 160 vials of 5 mL each, depending on the selected rack. As the first fully integrated autosampler of the new OMNIS IC generation, it is installed directly below the OMNIS IC as standard. It is not a stand-alone device, but an integral part of the OMNIS IC System, which is conveniently controlled via the OMNIS Software.Key features:Compact footprint: Can be placed directly under the OMNIS IC; High sample throughput: 96 x 10 mL vials, 160 x 5 mL vials, 192 x (1500, 700, 300) µL HPLC vials, 384 x 2 mL well format (deep well plate); High speed (30 s/injection of 5 µL); Removable autosampler tray for easy loading and unloading; Interior lighting for easy loading and unloading; Fast and precise xyz needle drive with automatic vial detection; Follow-up light and status display for visual traceability of needle movement and autosampler status; High flexibility for different sample vessels and rack types (including customer-specific racks); Six integrated positions for 50 mL bottles, e.g., for standards or rinsing solutions; Integrated rinsing station and leak detection as standard for maximum safety; Fully integrated into the OMNIS Software; Optional upgrades: 3/2-way valves, dilution station, barcode reader;

2.1054.0020

The OMNIS IC Autosampler COOL automates the sample change in the OMNIS IC System and enables efficient processing of up to 160 vials of 5 mL each, depending on the selected rack. In addition, the OMNIS IC Autosampler COOL offers the option of precisely controlling the temperature in the range from 4 °C to 22 °C, enabling a large number of samples to be cooled. The cooling function is ideal for thermally unstable and biochemically relevant samples, for example in the analysis of organic acids, halogenated acetic acids, amino acids, and carbohydrates.Key features:Compact footprint: Can be placed directly under the OMNIS IC; Temperature control from 4 °C to 22 °C; High sample throughput, large quantity of coolable samples: (96 x 10 mL vials, 160 x 5 mL vials, 192 x (1500, 700, 300) µL HPLC vials, 384 x 2 mL well format (deep well plate); High speed (30 s/injection of 5 µL); Removable autosampler tray for easy loading and unloading; Interior lighting for easy loading and unloading; Fast and precise xyz needle drive with automatic vial detection; Follow-up light and status display for visual traceability of needle movement and autosampler status; High flexibility for different sample vessels and rack types (including customer-specific racks); Six integrated positions for 50 mL bottles, e.g., for standards or rinsing solutions; Integrated rinsing station and leak detection as standard for maximum safety; Fully integrated into the OMNIS Software; Optional upgrades: 3/2-way valves, dilution station, barcode reader;

BWT-840000920

The TacticID®-1064 is a field-ready, handheld Raman Spectrometer designed for fast and accurate non-contact screening by security staff and emergency services (e.g. law enforcement personnel, customs and border guards, as well as bomb disposal squads). The TacticID-1064 utilizes proven Raman spectroscopy, allowing users to obtain real-time identification of a wide variety of unknown chemicals, narcotics, pharmaceutical drugs, explosives, and other substances in less than one minute. Accordingly, operational uncertainty and response time are significantly reduced. By utilizing the 1064 nm wavelength, the TacticID-1064 avoids fluorescence, allowing users to even work with difficult street samples.

2.945.0020

Intelligent stand-alone detector equipped with the IC Amperometric Detector. Outstanding selectivity due to the four measuring modes: DC, PAD, flexIPAD, CV. The excellent signal/noise ratio and the very fast start-up guarantee the highest in measurement precision. For use with intelligent IC instruments or as independent detector.

2.771.0010

The universally applicable analog-digital converter with two channels and 24 Bit resolution. The data is passed along to the PC through the RS-232C interface and can be processed further there with IC Net or with MagIC Net.

2.921.1110

Rapid, nondestructive analyses of solid and liquid substances.The NIRS XDS RapidContent Analyzer enables rapid, nondestructive analyses of solid powders, coarser granulates, pellets or flakes.Composition or material identification testing is performed either in the laboratory or at-line, on samples contained in their original packaging, bags or vials. An optional variable spot-size feature enables the sample illumination to be adjusted based on the physical properties of your samples.The measurement of liquid samples succeeds through the addition of the NIRS Transflection Kit for liquid samples (order number: 6.7400.010).The sample is centered with the aid of the NIRS XDS iris (order number: 6.7425.000), thus enhancing the reproducibility of the analysis.Versions with built-in mobile sample slides in X or XY direction are also available and are used to investigate larger, nonhomogenous sample quantities or for the automated investigation of samples in vials or tablets in reflection.NIRS XDS RapidContent Analyzer – Solids: Sample slide in X direction (order number: 2.921.1120); NIRS XDS MultiVial Analyzer: Sample slide in XY direction (order number: 2.921.1210);

2.922.0010

Robust near-infrared spectroscopy for quality control, not only in laboratories but also in production environments.The DS2500 Analyzer is the tried and tested, flexible solution for routine analysis of solids, creams, and optionally also liquids along the entire production chain. Its robust design makes the DS2500 Analyzer resistant to dust, moisture, vibrations, and temperature fluctuations, which means that it is eminently suited for use in harsh production environments.The DS2500 covers the full spectral range from 400 to 2500 nm and delivers accurate, reproducible results in less than one minute. The DS2500 Analyzer meets the demands of the pharmaceutical industry and supports users in their day-to-day routine tasks thanks to its simple operation.Thanks to accessories tailored perfectly to the instrument, optimum results are achieved with every sample type, no matter how challenging it is, e.g. coarse-grained solids such as granulates or semi-solid samples such as creams. The MultiSample Cup can help improve productivity when measuring solids, as it enables automated measurements of series containing up to 9 samples.

2.921.1310

Rapid, nondestructive analyses of tablets, capsules and other solid-state dosage forms.The NIRS XDS MasterLab Analyzer enables the rapid, nondestructive analyses of solid-state dosage forms such as tablets, capsules, film-coated tablets, gel tablets and gel capsules for manufacturers in the pharmaceuticals industry. Solids in vials can also be analyzed with the NIRS XDS MasterLab Analyzer. The analysis takes place in reflection or transmission mode. The sample input proceeds via a sample slide that can be moved in x and y direction and that is designed for trays with several tablets and/or vials. Analyses of individual samples are optimized with an iris. An optionally available coarse granular sample cell for coarse granular substances extends analysis to include practically all solid forms ranging from fine powders to coarse granular materials, e.g., pellets and flakes.

2.921.1510

Robust measurement system for the monitoring of reactions in technical centers and in pilot plants.The NIRS XDS Interactance OptiProbe Analyzer enables the simple and reliable monitoring of chemical reactions in technical centers and pilot plants. The method development and the scale-up of production processes are areas of application in which the NIRS XDS Interactance OptiProbe Analyzer supplies precise results regarding the identity and quality of a wide variety of samples. Whereas solids, strongly scattering liquids and slurries are measured with the reflection probe, the immersion probe is used to analyze aqueous products, clear liquids and solvents. The probe is connected to the analyzer through an optical fiber to enable secure measurements even under rough and/or dangerous conditions in the processing environment.

2.850.9110

Compact and intelligent amperometric detector for intelligent IC instruments. Outstanding selectivity due to the four measuring modes: DC, PAD, flexIPAD and CV, as well as the excellent signal/noise ratio and the very fast stabilization of the measuring signal guarantee the highest in measurement precision.

2.921.9010

The NIRS XDS Vial Heater Module enables analyses of samples at temperatures of up to 200 °C. The Vial Heater is used together with an NIRS XDS Transmission OptiProbe Analyzer. The Transmission Probes are fastened across from one another in the NIRS XDS Vial Heater. The NIRS disposable glass vials with 4 mm or 8 mm diameter are positioned between the two optical fibers in the heating block of the NIRS XDS Vial Heater. The temperature of the heating block can be regulated up to 200 °C. The sample and the optical fiber can be protected against ambient light with a lid. The spectral measurement of the sample takes place in transmission.

IC-MS / IC-ICP/MS

The combination of IC with an electrospray ionization mass spectrometer (ESI-MS) or with an inductively coupled plasma mass spectrometer (ICP-MS) solves even complex separation problems with maximum measurement sensitivity. This coupling technology enables unambiguous identification of peaks and is at the same time less susceptible to disruptive matrix effects than ion chromatography with conductivity measurement.Learn more about the coupling of IC and mass spectrometers

2.943.0110

The 943 Professional Reactor Vario is a heatable reactor, especially developed for pre- and post-column derivatization. It captivates by its robustness, the fast heating rate and the possibility of carrying out reactions at up to 150 °C.

2.943.0210

The 943 Professional Thermostat Vario is a stand-alone column oven for up to two columns with a maximum length of 150 mm. It captivates by its fast heating rate and the possibility of operating two separation columns together at up to 80°C.

ProfIC-12-Anion

The Professional IC system with conductivity detection enables the determination of anions with a binary high-pressure gradient. In addition to step gradients, any linear, convex or concave gradients can be run with this system in order to work in a time-optimized fashion. Schematic diagram

ProfIC-01-AnCat

The very compact Professional IC system with conductivity detection enables the fully automatic determination of anions and cations. With "ProfIC 1 – AnCat", anions and cations can be determined not only in parallel but also in time-saving fashion completely independently of one another. Both of the systems integrated in "ProfIC 1 – AnCat" use the same 858 Professional Sample Processor with pump that is subjected to intelligent management by the MagIC Net™ software. Schematic diagram

ProfIC-02-AnCat

The very compact Professional IC system with Metrohm Inline Ultrafiltration and conductivity detection enables the fully automatic determination of anions and cations. With "ProfIC 2 – AnCat", anions and cations can be determined not only in parallel but also in time-saving fashion completely independently of one another. The two systems integrated in "ProfIC 2 – AnCat" use the same 858 Professional Sample Processor – Pump that is subjected to intelligent management by the MagIC Net™ software. Schematic diagram

A302060041C

The 2060 TI Ex Proof Process Analyzer is an intrinsically safe wet chemistry process analyzer for process monitoring in gas or dust zoned hazardous environments rated as zone 0, 1 and 2, or 20, 21, and 22. It complies with EU Directives 94/9/EC (ATEX95) and is certified for Zone 1 and Zone 2 areas. Its design combines a purge and pressurization system with intrinsically safe electronic devices. The air purging phase and permanent overpressure prevent potentially explosive atmospheres from entering the analyzer enclosure.The analyzer’s design eliminates the need for purging large analyzer shelters, allowing for direct installation at the production line within hazardous zones. It supports various kinds of techniques, including titration, Karl Fischer titration, photometry, ion-selective electrode measurements, and direct measurements.

A302060041C

The 2060 TI Ex Proof Process Analyzer is an intrinsically safe wet chemistry process analyzer for process monitoring in gas or dust zoned hazardous environments rated as zone 0, 1 and 2, or 20, 21, and 22. It complies with EU Directives 94/9/EC (ATEX95) and is certified for Zone 1 and Zone 2 areas. Its design combines a purge and pressurization system with intrinsically safe electronic devices. The air purging phase and permanent overpressure prevent potentially explosive atmospheres from entering the analyzer enclosure.The analyzer’s design eliminates the need for purging large analyzer shelters, allowing for direct installation at the production line within hazardous zones. It supports various kinds of techniques, including titration, Karl Fischer titration, photometry, ion-selective electrode measurements, and direct measurements.

ADI2045100

The ProcessLab ADI 2045PL is a robust routine system for at-line ion analysis on the production floor and in control labs. It is typically used for multiple sampling points and parameters that do not require fast analysis and response times. Samples are taken manually at each sampling point, fed into the ProcessLab (manually or by means of an autosampler), and automatically analyzed.The ProcessLab is offering a variety of techniques: titration, colorimetry and ISE measurements. Additional techniques can be integrated such as density, temperature, flow, turbidity and conductivity.The ProcessLab Manager software offers a flexible user-defined platform with an easy-to-use graphical interface. ProcessLab ADI 2045PLis easily integrated to a local network or fully operated by remote control.

2.921.0620

Robust, flexible measurement system for the quality control of solid and liquid substancesThe NIRS XDS SmartProbe Analyzer enables rapid, nondestructive analyses of solid and liquid substances and formulations. With the NIRS XDS SmartProbe Analyzer, identity and quality of a substance can be determined directly in the respective original transport containers, no matter whether it be bottles, bags or other containers. The design, which is just as robust as it is ergonomic, makes the NIRS XDS SmartProbe Analyzer the ideal quality control solution in both the warehouse and in the laboratory. Using the NIRS XDS SmartProbe Analyzer could not be easier. For the measurement, the probe is held in the sample and the measurement button is pressed. Pass/fail results can be read off on the handle immediately after the measurement.

2.921.1620

Robust, flexible measurement system for the quality control of solid and liquid substancesThe NIRS XDS SmartProbe Analyzer enables rapid, nondestructive analyses of solid and liquid substances and formulations. With the NIRS XDS SmartProbe Analyzer, identity and quality of a substance can be determined directly in the respective original transport containers, no matter whether it be bottles, bags or other containers. The design, which is just as robust as it is ergonomic, makes the NIRS XDS SmartProbe Analyzer the ideal quality control solution in both the warehouse and in the laboratory. Using the NIRS XDS SmartProbe Analyzer could not be easier. For the measurement, the probe is held in the sample and the measurement button is pressed. Pass/fail results can be read off on the handle immediately after the measurement.

2.1072.0010

Near-infrared spectrometer for liquid, solid, and viscous samples. Developed and produced in accordance with Swiss quality standards, the OMNIS NIR Analyzer is the near-infrared spectroscopy (NIRS) solution for routine analysis along the entire production chain. Its application of the latest technologies and its integration in the modern OMNIS Software are reflected in its speed, operability and flexible utilization of this NIR spectrometer.Overview of the advantages of the OMNIS NIR Analyzer Liquid/Solid:Measurements of fluid, solid, and viscous samples in less than 10 seconds; Fast sequential measurement of liquid and solid samples without conversion of the system; Simple integration in an automation system or link with additional analysis technologies (titration); Supports numerous sample vessels; Highlights of measurements of liquids:Temperature control on the sample from 25–80 °C; Automatic detection of the sample; Highlights of measurements of solids:Automated multi-position measurements for reproducible results, even with nonhomogeneous samples;

2.921.0610

Robust, flexible measurement system for the quality control of solid and liquid substancesThe NIRS XDS SmartProbe Analyzer enables rapid, nondestructive analyses of solid and liquid substances and formulations. With the NIRS XDS SmartProbe Analyzer, identity and quality of a substance can be determined directly in the respective original transport containers, no matter whether it be bottles, bags or other containers. The design, which is just as robust as it is ergonomic, makes the NIRS XDS SmartProbe Analyzer the ideal quality control solution in both the warehouse and in the laboratory. Using the NIRS XDS SmartProbe Analyzer could not be easier. For the measurement, the probe is held in the sample and the measurement button is pressed. Pass/fail results can be read off on the handle immediately after the measurement.The XDS SmartProbe Module is also available with a 3 m fiber length (order number: 2.921.1620)

ADI2045010C

The ADI 2045TI is a wet chemical analyzer. At its core lies an industrial PC with an industry standard Communication Logic Controller. Its modular wet part gives maximum flexibility to adapt the configuration to a specific application. The burettes or pumps can be chosen for all liquid handling and selection valves implemented for multiple sample streams.Simultaneous analysis between two streams and several methods gives faster response times. The control software on top of tiamo allows the user to program different sequences of analysis and set conditions and alarms. Remote access is achieved with a standard remote desktop tool for further diagnostics.The 2045TI is offering wet chem techniques: titration, Karl Fischer titration, colorimetry, direct measurement and standard additions methods. Data from external devices such as flow, density and turbidity can be imported and processed by the analyzer to compensate for results automatically and provide added monitoring value.

ECAT.COMPLETE.S

Metrohm Autolab offers an ECAT complete package that offers electrochemical instrumentation and specific accessories with an industry-leading 3-year warranty as standard. With an accurate and reliable PGSTAT302N loaded with additional functional modules including Electrochemical Impedance Spectroscopy (EIS) and true linear voltammetry, pH and temperature sensor, and dual-mode bipotentiostat.The Autolab ECAT complete package comes with free NOVA 2 software that provides built-in Levich and Koutecky – Levich analysis methods for fast and easy data analysis. Included in the package is also a Rotating Ring Disk Electrode (RRDE) that is high precision with an ultra-low noise electrode rotation from 100 to 10,000 RPM. A complete RRDE electrochemical cell is also included in the package.Possible applications include: electrocatalyst material testing, mechanistic information, detection of intermediates via collection and shielding experiments (RRDE), electrochemical kinetics studies, mass-transport properties with forced convection conditions.This package offers versatile electrocatalysis research with superior experimental capabilities.

A252035031C

The 2035 Process Analyzer for Thermometric Titration performs automated titrations with a fast-responding, highly sensitive temperature sensor. Instead of the electrochemical potential, the endpoint is determined by enthalpy, i.e., by change in temperature of the solution during the titration. Thermometric titration is by far the most robust titration method available on the market and is excellent for 24/7 online process applications, such as the monitoring of etching baths. No sensor calibration is necessary, and less cleaning steps are needed. Rapid analysis is possible with this technique; acid mixtures, e.g., can be analyzed in less than three minutes.Thermometric titration can be used for a wide variety of titration analyses and is well-suited to handle aggressive sample matrices because of the robust thermometric sensor. The sensor needs no maintenance because fouling and other undesired interactions are minimal, and there are no membrane or diaphragm problems as with other titration methods. Thermometric titration is a problem solver for difficult samples which cannot be titrated potentiometrically, and is also a preferred technique in situations when HF is present in samples.