Accessory Finder

EC.Raman.Battery

An Autolab modular PGSTAT302N with an Electrochemical Impedance Spectroscopy (EIS) module installed and a B&W Tek i-Raman Plus 532 H System are the foundation of this system. Depending on your cell size and design you can add either a B&W Tek Raman Video Micro-Sampling System (532 nm), or the B&W Tek Raman Probe Holder.Get ready to track age-induced structural changes, electrolyte decomposition, and solid electrolyte interphase (SEI) formation with your EC-Raman Battery Solution.It is easy to get started, see instant results, all with an instrument you can upgrade as your research progresses.• Two editable hyphenated EC-Raman procedures for the NOVA software as well as the BWSpec software for extended data analysis.• An electrochemical workstation with high accuracy EIS.• Future-proof your research with the ability to add up to 7 additional modules post-installation.Choose, depending on your cell size, either a B&W Tek Raman Video Microsampling System (532 nm), or the B&W Tek Raman Probe Holder.B&W Tek Raman Video Microsampling System (532 nm) can accommodate cells up 30 mm high.B&W Tek Raman Probe Holder can accommodate large battery-dedicated EC-Raman cells.

EC.Raman.Corrosion.Explorer

Includes an Autolab modular PGSTAT302N with an Electrochemical Impedance Spectroscopy (EIS) module installed, a B&W Tek i-Raman Plus 532 H System, a B&W Tek Raman Video Microsampling System (532 nm) and an Autolab Trigger cable.Ready when you are, the EC-Raman Explorer Corrosion Solution is easy to use. Get started quickly with a versatile potentiostat/galvanostat that can be expanded as your research develops.• Two editable hyphenated EC-Raman procedures for the NOVA software as well as the BWSpec software for extended data analysis.• An electrochemical workstation with high accuracy EIS.• Future-proof your research with the ability to add up to 7 additional modules post-installation.• 532 nm laser excitation for higher Raman signal• Visual surface inspection with the microsampling system

DRP-RAMANPROBE638

Reflection probe designed to be used with a single excitation 638 nm wavelength (up to 300 mW). Suitable to work with DropSens Raman cell for screen-printed electrodes (ref. RAMANCELL), Raman cell for conventional electrodes (ref. RAMANCELL-C) or with any conventional Raman set-up.

EC.Raman.ECAT.Explorer

Includes an Autolab modular PGSTAT302N with an Electrochemical Impedance Spectroscopy (EIS) module installed, a B&W Tek i-Raman Plus 532 H System, a B&W Tek Raman Video Microsampling System (532 nm) and an Autolab Trigger cable.Synchronize your electrochemical measurements with in situ Raman spectroscopy providing:• Simultaneous structural and functional information about your catalysts• Operando measurements allow for tracking changes of the catalyst structure, identifying adsorbed products or intermediates• A powerful modular potentiostat/galvanostat with current ranges from 10 nA to 1 A.• An electrochemical workstation with high accuracy EIS.• Two editable hyphenated EC-Raman procedures for the NOVA software as well as the BWSpec software for extended data analysis.• Future-proof your research with the ability to add up to 7 additional modules post-installation.• 532 nm laser excitation for higher Raman signalAll without complicated setups or complex training.

EC.Raman.Corrosion.Starter

Includes a compact Autolab PGSTAT204 with an Electrochemical Impedance Spectroscopy (EIS) module installed, a B&W Tek i-Raman Plus 532 H System, a B&W Tek Raman Video Micro-Sampling System (532 nm) and an Autolab Trigger cable.Get started quickly and have a dual perspective on corrosion phenomena. The EC-Raman Starter Corrosion Solution provides you with the instrumentation you need to get started.• Two editable hyphenated EC-Raman procedures for the NOVA software as well as the BWSpec software for extended data analysis.• An electrochemical workstation with high accuracy EIS.• Ready-to-go and simple to use.• 532 nm laser excitation for higher Raman signal• Visual surface inspection with the microsampling system

DRP-RAMANPROBE

Reflection probe designed to be used with a single excitation 785 nm wavelength (up to 500 mW). Suitable to work with DropSens Raman Cell for Screen-Printed Electrodes or with any conventional Raman set-up.

EC.Raman.ECAT.Starter

Includes a compact Autolab PGSTAT204 with an Electrochemical Impedance Spectroscopy (EIS) module installed, a B&W Tek i-Raman Plus 532 H System, a B&W Tek Raman Video Microsampling System (532 nm) and an Autolab Trigger cable.Discover simultaneous structural and functional information about your catalysts quickly without complicated setups or worries about synchronizing measurements. This is all possible with the EC-Raman Starter Solution.• An electrochemical workstation with high accuracy EIS.• Two editable hyphenated EC-Raman procedures for the NOVA software as well as the BWSpec software for extended data analysis.• Measurements are automatically synchronized.• 532 nm laser excitation for higher Raman signal.

DRP-RAMANCELL

Black teflon reflection cell for performing Raman Spectroelectrochemistry with screen-printed electrodes in combination with ref. RAMANPROBE.

DRP-RAMANCELL-C

Cell in PEEK for Raman spectroelectrochemical measurements. Designed be used with ref. RAMANPROBE and conventional Metrohm electrodes.

DRP-VKITSPELECRAMAN

Kit for verifying the correct performance of SPELECRAMAN instrument. With this kit, you will be able to perform electrochemical and optical verification.

DRP-RAMANCELLS-U3

DRP-RAMANCELL-M

Cell for spectroelectrochemical applications in combination with a microscope, allowing the laser focus onto the surface of the working electrode, obtaining valuable information while the electrochemical process takes place.

DRP-TLFCLRAMANCELL

607511300

Carrying case for i-Raman NxG and i-Raman Plus. The case fits one i-Raman NxG or i-Raman Plus system, a fiber-optic probe, USB and power cables, laser goggles, and laser interlock and keys.System and accessories are not included. Case dimensions are 22 in x 17.1 in x 10.75 in.

607510360

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length. Compatible with i-Raman Duo.

6.07510.370

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length. Compatible with i-Raman Duo.

607510010

Interlock plug for i-Raman NxG and i-Raman Duo systems.

607510050

Laser keys for i-Raman NxG and i-Raman Duo systems.

607510490

Lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length. Compatible with i-Raman Plus 532.

607510450

Lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length. Compatible with i-Raman Plus 785S and 785HR models.

607510060

AC power cord for i-Raman NxG and i-Raman Duo systems.

607510000

Power supply for i-Raman NxG and i-Raman Duo systems.

607510500

Lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length. Compatible with i-Raman Plus 532.

607510080

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length.Compatible with i-Raman NxG 532.

607510260

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length.Compatible with i-Raman NxG 1064.

607510460

Lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length. Compatible with i-Raman Plus 785S and 785HR models.

607510140

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 1.5 meter fiber length.Compatible with i-Raman NxG 785S and 785H models.

607510090

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length.Compatible with i-Raman NxG 532.

607510150

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length.Compatible with i-Raman NxG 785S and 785H models.

607510030

USB-C to USB-C cable for i-Raman NxG and i-Raman Duo systems.

607510270

High-throughput lab-grade fiber optic Raman probe assembly with trigger button. 5 meter fiber length.Compatible with i-Raman NxG 1064.

607510300

See-through probe for measurements through packaging. 1.5 meter fiber length. Includes focus adapter, surface regulator, and light shield.Compatible with i-Raman NxG 1064.

607510180

See-through probe for measurements through packaging. 1.5 meter fiber length. Includes focus adapter, surface regulator, and light shield. Compatible with i-Raman NxG 785S and 785H models.

607510240

C-276 Hastelloy immersion shaft compatible with lab-grade Raman probes. Includes adjustable shaft adapter. Compatible with 532, 785, 860 and 1064 nm wavelengths.

607510310

See-through probe for measurements through packaging. 5-meter fiber length. Includes focus adapter, surface regulator, and light shield.Compatible with i-Raman NxG 1064.

607510190

See-through probe for measurements through packaging. 5-meter fiber length. Includes focus adapter, surface regulator, and light shield.Compatible with i-Raman NxG 785S and 785H models.

607511010

316 Stainless steel immersion shaft compatible with lab-grade Raman probes. Includes adjustable shaft adapter. Compatible with 532, 785, 860 and 1064 nm wavelengths.

BWT-840000961

Video microscope sampling system for use with B&W Tek's lab and industrial Raman probes. Includes a 20x objective at a working distance of 16 mm. Offers manual rough and fine adjustment on the X, Y, and Z-axes, coaxial LED illuminator for target alignment, video camera for sample observation, and is compatible with standard microscope objectives. Probe not included, available separately. 785 nm configuration.BAC151C-785

DRP-ALCRUCIBPACK

Aluminum crucibles (5 x 1.6 mm ; 5 x 4.2 mm) to be used in combination with RAMANCELL to perform Raman measurements over solid samples.

BWT-840001178

Carrying Case for i-Raman, i-Raman Plus, i-Raman EX and GemRam systems. This is black soft carrying case with extendable handle, wheels and custom cut foam (27 to 28” case length) for safe, convenient instrument transport. (Model CCRM-GEMRAM)

BWT-810000682

External Lithium-Ion battery that provides constant 12 VDC. (Compatible with the i-Raman-Plus, i-Raman Pro and i-Raman EX models).EBP106

607511270

Enclosure for i-Raman sampling accessories, including microsampling system and probe holder. The enclosure eliminates direct ocular and/or skin exposure to the laser emission, making the otherwise class 3B i-Raman series laser as safe as a class 1 laser. The enclosure is ergonomically designed to facilitate sample loading and system operation. Compatible with i-Raman NxG, i-Raman Duo, and i-Raman Plus products.

BWT-840000117

Raman flow-through cell made of stainless steel, for inline Raman measurements of liquid samples by interfacing with standard laboratory probe (9.5 mm diameter; probe is not included in scope of delivery).

BWT-840000679

Zoom lens for our BAC100/BAC102 fiber-optic Raman probes. Working distance is adjustable from 20 mm to 60 mm. Suitable for a Raman excitation range from 500 nm to 850 nm.

BWT-840000711

Zoom lens for our BAC100/BAC102 fiber-optic Raman probes. Working distance is adjustable from 20 mm to 60 mm. Suitable for a Raman excitation range from 785 nm to 1064 nm.

BWT-840000680

Long-working-distance zoom lens for BAC100/BAC102 fiber-optic Raman probes. Working distance is adjustable from 60 mm to 600 mm. Suitable for a Raman excitation range from 500 nm to 850 nm.

BWT-840000712

Long-working-distance zoom lens for BAC100/BAC102 fiber-optic Raman probes. Working distance is adjustable from 60 mm to 600 mm. Suitable for a Raman excitation range from 1000 nm to 1100 nm.

BWT-840000345

Handheld Raman accessories: bottle adapterNR2-BSA

BWT-840000681

A telescope Stand-off lens for BAC100/BAC102 fiber-optic Raman probes. Wide zoom range for sample measurement ranges from 0.6 meters to 6 meters. Suitable for a Raman excitation range from 500 nm to 850 nm.RTS202-VIS-NIR

BWT-810000721

Carrying Case for i-Raman Pro and Prime series. Includes a soft, black carrying case with wheels and custom-cut foam for packing and safely carrying the i-Raman Pro, i-Raman Prime, STRam, or QTRam.CCRM

607510400

Probe holder for use with Metrohm's lab-grade Raman probes, including lab-grade shafts, industrial-grade immersion shafts, and see-through shafts. Provides manual coarse and fine XYZ adjustments.

BWT-840001202

RIS100-HS-785-08: Hastelloy immersion shaft for BAC102/BAC100B Raman probes with excitation wavelength 785nm. Features a 0.5" (12.7 mm) O.D. x 8" (203.2 mm) L Hastelloy C-276 shaft and a gold- sealed sapphire ball lens. Working distance 0.4 mm in air, 0.6 mm in water. Shaft operating temperature is up to 250 degrees C, pressure up to 4000 psi. Shaft must be purchased with B&W Tek Raman probe.RIS100-HS-785-08

BWT-840001204

RIS100-HS-532-08: Hastelloy immersion shaft for BAC102/BAC100B Raman probes with excitation wavelength 532 nm. Features a 0.5" (12.7 mm) O.D. x 8" (203.2 mm) L Hastelloy C-276 shaft and a gold- sealed sapphire ball lens. Working distance 0.4 mm in air, 0.6 mm in water. Shaft operating temperature is up to 250 degrees C, pressure up to 4000 psi. Shaft must be purchased with B&W Tek Raman probe.RIS100-HS-532-08

BWT-840000969

Handheld Raman Spectrometer 1064 accessory:. Contact immersion probe, 6” length, working distance approx. 1 mm, operating pressure up to 2 bar at room temperature.NRX-CTP-IMP

BWT-840000970

Handheld Raman Spectrometer 1064 accessories: Large bottle adapter with 10 mm working distance.NRX-BSA

BWT-840000529

Replacement shaft for BAC100/102-532 Raman probe module made of standard stainless steel. Replacement shaft with adhesive-sealed fused-silica window. Working distance 5.4 mm. Shaft diameter 9.5 mm, shaft length 76.2 mm.

BWT-840000530

Replacement shaft for BAC100/102-1064 Raman probe module made of standard stainless steel. Replacement shaft with adhesive-sealed fused-silica window. Working distance 5.9 mm. Shaft diameter 9.5 mm; shaft length 76.2 mm.RSS100-1064

BWT-840000962

Video microscope sampling system for use with B&W Tek's lab and industrial Raman probes. Includes a 20x objective with a working distance of 16 mm. Offers manual rough and fine adjustment on the X, Y, and Z-axes, coaxial LED illuminator for target alignment, video camera for sample observation, and is compatible with standard microscope objectives. Probe not included, available separately. 532 nm configuration.BAC151C-532

BWT-840000985

Video microscope sampling system for use with B&W Tek's lab and industrial Raman probes. Includes a 20x objective at a working distance of 16 mm. Offers manual rough and fine adjustment on the X, Y, and Z-axes, coaxial LED illuminator for target alignment, video camera for sample observation, and is compatible with standard microscope objectives. Probe not included, available separately. 1,064 nm configuration.BAC151C-1064

3500003120

This trigger cable connects the Autolab PGSTAT302N to the i-raman plus 532H and synchronizes and controls spectra acquistion through the NOVA software.

3500003130

This trigger cable connects the Autolab PGSTAT204 to the i-raman plus 532H and synchronizes and controls spectra acquistion through the NOVA software.

BWT-840000963

Video microscope sampling system for use with B&W Tek's lab and industrial Raman probes. Includes a 20x objective at a working distance of 16 mm. Offers manual rough and fine adjustment on the X, Y and Z-axes, coaxial LED illuminator for target alignment, video camera for sample observation, and is compatible with standard microscope objectives. Probe not included, available separately. Dual 532/785 nm configuration.BAC151C-532/785

BWT-840000964

Video microscope sampling system head for use with B&W Tek's lab and industrial Raman probes. With coaxial LED illuminator for target alignment and video camera for sample observation. Compatible with standard microscope objectives. Probe not included, available separately. Objective lens not included, available separately. 785 nm configuration.

BWT-840000965

Video microscope sampling system head for use with B&W Tek's lab and industrial Raman probes. With coaxial LED illuminator for target alignment and video camera for sample observation. Compatible with standard microscope objectives. Probe not included, available separately. Objective lens not included, available separately. 532 nm configuration.

BWT-840000984

Video microscope sampling system head for use with B&W Tek's lab and industrial Raman probes. With coaxial LED illuminator for target alignment and video camera for sample observation. Compatible with standard microscope objectives. Probe not included, available separately. Objective lens not included, available separately. 1064 nm configuration.

BWT-840000912

Handheld Raman O-ring replacement kit –(for shaft only).Kit includes: O-Ring#1 ID 9.00 mm x15 and O-Ring#2 ID 10.00 mm x15 (TacticID-N Plus, TacticID Mobile, and NanoRam-1064).TID-ORK

BWT-840000130

Optional immersion shaft for BAC100/BAC102 Raman probes with an excitation wavelength of 532 nm or 785 nm. Equipped with a 76.2 mm long body made of 316L stainless steel with an outer diameter of 12.0 mm and a silica window that is sealed with an O-ring made of perfluoro rubber. Operating distance 5.0 mm in air. Can be used at -55 °C to 200 °C. The seal is liquid-tight at low pressure ( 1 bar).

BWT-840000131

Optional immersion shaft for BAC100/BAC102 Raman probes with an excitation wavelength of 532 nm or 785 nm. Equipped with a 76.2 mm long body made of 316L stainless steel with an outer diameter of 12.0 mm and a sapphire-glass window that is sealed with an O-ring made of perfluoro rubber. Operating distance 5.0 mm in air. Can be used at -55 °C to 200 °C. The seal is liquid-tight at low pressure ( 1 bar).

BWT-810000719

Power cord for EU power for use with portable Raman systems.BWPC-EU

BWT-840000966

Video microscope sampling system head for use with B&W Tek's lab and industrial Raman probes. With coaxial LED illuminator for target alignment and video camera for sample observation. Compatible with standard microscope objectives. Probe not included, available separately. Objective lens not included, available separately. Dual 532/785 nm configuration.

BWT-840001154

Shoulder bag for TacticID series. Constructed with 1000d heavy duty fabric, multiple tactical pouches and compartment designed for rugged use and hard wearing.. Compatible with all TacticID products and NanoRam products. For transportation purposes only.TID-SBG

607510430

Distance regulator cap for standard lab-grade Raman probe shaft.

607510120

Replacement shaft for 532 nm excitation lab-grade Raman probe assembly. Working distance 5.4 mm.

607510220

Replacement shaft for 785 nm excitation lab-grade Raman probe assembly. Working distance 5.5 mm.

607510340

Replacement shaft for 1064 nm excitation lab-grade Raman probe assembly. Working distance 5.9 mm.

607510040

Validation cap with integrated polystyrene standard for lab-grade Raman probes with shaft diameter of 9.5 mm.

607510230

See-through shaft for use with lab-grade Raman probes. Optimized for 785 nm laser.Contains focus adapter, surface regulator, and light shield.

607510350

See-through shaft for use with lab-grade Raman probes. Optimized for 1064 nm laser.Contains focus adapter, surface regulator, and light shield.

607510410

Vial holder accessory for use with lab-grade Raman probes with shaft diameter of 9.5 mm. Compatible with 15 mm-diameter vial. 6-pack of 15 mm borosilicate glass vials included.

607510420

Cuvette holder for use with lab-grade Raman probes with shaft diameter of 9.5 mm. Compatible with standard cuvettes of 12.5 mm x 12.5 mm outer diameter (1 cm path length) for sampling liquids or powders.

BWT-840001177

Aperture removal tool for easy interchanging different apertures for optimal Raman spot size for transmission Raman with QT-Sampler.TOOL-APERTURE

BWT-840001283

The QT-Sampler is an accessory for transmission Raman measurements, enabling content uniformity testing of pharmaceutical tablets. Compatible with i-Raman Prime 785S and H models. Apertures and sample holders are sold separately.

BWT-840000528

TAP-KIT-T is a SERS Analysis kit for use with the TacticID-N Plus for Raman signal amplification and fluorescence reduction of hard-to-measure samples. This kit includes a black pouch, Tweezer, SERS Analysis Adaptor, and 25 SERS substratesSERS analysis kit for use with Raman handheld spectrometers from B&W Tek. For Raman signal amplification and fluorescence reduction of hard-to-measure samples. For use with 785 nm laser excitation. Includes: tweezers, TacPac adapter, 25 SERS strips.TAP-KIT-T

BWT-840001124

SERS analysis sample preparation kit for use with Raman handheld spectrometers from B&W Tek. For Raman signal amplification and fluorescence reduction of hard-to-measure samples. For use with 785 nm laser excitation. Disposable plastic single-use laboratory spatula, pipettes and PP graduated microcentrifuge tubes (2 ml) used to prepare samples for testing with TacPac™ SERS. Package of 25 SERS substrates included.TAP-SAM25

BWT-840001125

SERS analysis sample preparation kit for use with Raman handheld spectrometers from B&W Tek. For Raman signal amplification and fluorescence reduction of hard-to-measure samples. For use with 785 nm laser excitation. Disposable plastic single-use laboratory spatula, pipettes and PP graduated microcentrifuge tubes (2 ml) used to prepare samples for testing with TacPac™ SERS. Package of 50 SERS substrates included.TAP-SAM50

BWT-840000910

Lab-grade Raman fiber-optic probe module for analyses through packaging, with hand trigger, 105 µm diameter, 0.22 NA fiber for 785 nm excitation, 300 µm diameter, 0.22 NA for Raman pickup, optical density >6; up to 150 cm-1. 1.5 m fiber cable with FC/PC connector on the spectrometer end and FC/PC connector on the laser end. Adhesive sealed quartz window. Not for immersive use. Accessories included: Focus adapter, surface regulator, calibration cap.

BWT-840000353

Handheld Raman shaft protective cap, package of 10.

BWT-810000623

BAC151x-TRI tripod adapter for the BAC151x sampling system with Raman video microscope.

BWT-840000343

Point-and-shoot adapter for handheld Raman instruments. Compatible with NanoRam-1064 and TacticID Mobile.

BWT-840001123

Bluetooth 1D barcode scanner for use with BWID software operating a portable Raman instrument

BWT-840000354

Pouch for handheld Raman adapters compatible with NanoRam-1064, TacticID-N Plus, and TacticID Mobile.NR2-PCH-ADPT

BWT-840000342

Right-angle adapter for hands-free measurement using handheld Raman instruments. Compatible with NanoRam-1064 and TacticID Mobile.

BWT-840000332

Tablet holder compatible with all models of BAC100/BAC102 lab-grade fiber-optic Raman probe with 9.5 mm shaft diameter.

BWT-810000469

FC/PC and FC/APC receptacle cleaner recommended for i-Raman Pro/Prime, STRam, QTRam. Do not use on SMA.FRC

BWT-840000881

NanoRam accessories: 0.5” outer diameter x 150 mm L (5.9”) – Raman contact probe accessory for NanoRam. Rugged 316 stainless steel shaft.

BWT-840000433

NanoRam O-ring replacement kit – includes: O-rings, ID 9.00 mm, x15; O-Rings, ID 10.00 mm x15; O-rings, ID 13.00 mm x10 for the shaft in handheld Raman instruments.

6.021.08010

For connecting USB instruments.

6.02707.000

Protective case for the Mira M-3 and all accessories.

6.02707.020

Robust carrying case for MIRA DS and all accessories.

6.02707.030

Rugged carrying case for Misa and all accessories.

6.02707.400

Protective case for the Mira P and all accessory parts.

602709000

Rugged carrying case for TacticID-1064 ST

6.07501.010

50:50 (v:v) Toluene/Acetonitrile ASTM standard for calibration of the wavenumber axis of MIRA/MISA systems. Class 3B operation.

6.07502.000

Vial holder attachment for MIRA systems. Accommodates 15 x 26 mm glass vials.

Tablet holder attachment for MIRA systems that is used for analysis of formulated tablets of various sizes and shapes.

6.07505.000

Long distance point-and-shoot Adapter (LWD) for MIRA systems with a focal length of 7.6 mm. Class 3B operation.

6.07505.010

Short distance point-and-shoot Adapter (SWD) for MIRA systems with a focal length of 1.00 mm. Class 3B operation.

6.07505.020

Extra-long distance point-and-shoot Adapter (XLWD) for MIRA systems with a focal length of 18 mm. Class 3B operation.

6.07505.030

Accommodates Metrohm's proprietary P-SERS strips. Operation with laser class 1. The P-SERS attachment allows full insertion of P-SERS strips ensuring optimal measurement conditions.

6.07505.040

Suitable for 15 x 26 mm glass vials. MISA vial attachment can be used for measurements with Metrohm's gold or silver SERS nanoparticles. Laser Class 1 operation.

6.07506.000

The right-angle attachment is designed to allow the user to collect data by placing the substance on a surface and then laying the MIRA down next to it with the right angle tip covering the substance. Ideal for a baggy on hood of a squad car. Eliminates many of the variables during testing. Class 3B operation.

6.07506.010

The Universal attachment is designed to be a universal tip for use in three different positions. Position 3 is used for direct contact. Position 2 is used for thin plastic bags, for which the focal point is approximately 1.0 mm from the end of the adapter. Position 1 is used for focusing through bottles, for which the focal point is approximately 8 mm from the end of the metal tip. Class 3B operation.

6.07506.020

The Standoff Attachment is designed to allow the user to determine the spectrum of a substance from a distance of 0.25 to 1.5 meters. Perfect for determination of the contents of a 55-gallon drum or barrel or to stand in a doorway and scan a container from across the room.

6.07506.030

The Contact Ball Probe Attachment is designed to allow the user to collect data from a sample with no concern of proper focus. Simply contact the sample or immerse the probe to acquire the data. The stainless steel construction allows for easy cleaning. Class 3B operation.

6.07506.040

The SERS attachment enables the user to perform a very easy measurement of the SERS spectrum of a substance that has been applied to a P-SERS test strip. After applying a sample to the P-SERS test strip, the user simply inserts it into the slot of the SERS attachment for analysis.

6.07506.050

The disposable protective sheath is made of extremely thin LDPE and is used to prevent cross-contamination when using the ball probe in several containers. Quantity: 250 pieces.

6.07506.060

iUA is an intelligent 3-position collection optics accessory for MIRA systems. The iUA combines the flexibility of a universal attachment with the intelligent mode of operation of MIRA SmartTip Attachments. Each position indicates the ideal purpose of that position, i.e. surface, bag, or bottle.

6.07506.070

Maximize safety with standoff identification of chemicals, explosives, drugs, and toxic materials.Identify threats from 2 meters away; Operate remotely when risk is high; Get quick and easy information with automated routines; Identify >20,000 substances in seconds; Robot mountable for complete hot-zone assessment ;

6.07506.100

Silver P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with silver P-SERS substrates include illicit drugs, medicines, dyes and amines. Available in packs of 50.

6.07506.110

Silver P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with silver P-SERS substrates include illicit drugs, medicines, dyes and amines. Available in packs of 500.

6.07506.120

Silver P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with silver P-SERS substrates include illicit drugs, medicines, dyes and amines. Available in packs of 5000.

6.07506.130

Gold P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with gold P-SERS substrates include pesticides, medicines, and thiols. Available in packs of 50.

6.07506.140

Gold P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with gold P-SERS substrates include pesticides, medicines, and thiols. Available in packs of 500.

6.07506.150

Gold P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that are easier to detect with gold P-SERS substrates include pesticides, medicines, and thiols. Available in packs of 5000.

607506160

Silver P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with silver P-SERS substrates include illicit drugs, medicines, dyes and amines. Available in packs of 25.

607506170

Gold P-SERS substrates (Printed SERS substrates). The substrates are designed to fit directly into the SERS attachment for optimal signal collection. Potential target analytes that show favorable performance with gold P-SERS substrates include pesticides, medicines, and thiols. Available in packs of 25.

607506300

SERS active silver colloidal solution. Potential target analytes that show favorable performance with silver colloid include illicit drugs, medicines, dyes, and amines - 10 ml package.

607506310

SERS active silver colloidal solution. Potential target analytes that show favorable performance with silver colloid include illicit drugs, medicines, dyes, and amines - 50 ml package.

607506340

SERS active silver colloidal solution. Potential target analytes that show favorable performance with silver colloid include illicit drugs, medicines, dyes, and amines - 500 ml package.

607506350

SERS active gold colloidal solution. Potential target analytes that show favorable performance with gold colloid include pesticides, medicines, and thiols - 10 mL package.

607506360

SERS active gold colloidal solution. Potential target analytes that show favorable performance with gold colloid include pesticides, medicines, and thiols - 50 mL package.

607506390

SERS active gold colloidal solution. Potential target analytes that show favorable performance with gold colloid include pesticides, medicines, and thiols - 500 mL package.

The ID Kit - Illicit Materials contains all the components a MIRA / MISA user requires to analyze a crude street sample and determine whether opioid and other illicit drugs are present.The kit contains a disposable spatula, dropper, a small vial of solvent, and 2 silver P-SERS strips (Ag). The user simply scoops a small amount of the unknown sample into the vial of solvent and then either dip the P-SERS strip into the vial OR use the provided dropper to apply sample onto the strip.The ID Kit allows the detection and identification of trace amounts of opioid, even in highly fluorescent street samples.

607506460

The ID Kit - Au P-SERS contains the components a Mira / Misa user requires to perform a SERS analysis using gold P-SERS strips. The kit contains a disposable spatula, dropper, sample vials and 2 gold P-SERS strips.

6.07506.470

The ID Kit - Ag P-SERS contains the components a Mira / Misa user requires to perform a SERS analysis using silver P-SERS strips. The kit contains a disposable spatula, dropper, sample vials and 2 silver P-SERS strips.

607506480

Introductory kit for SERS analysis containing gold and silver P-SERS strips and gold and silver colloids.

6.07507.000

Optical Blackout cloth for sampling in sunlight conditions.

6.07507.100

The MIRA DS Field Carry Pouch is a utility pouch with padded sides for carrying the MIRA into the field. It has space for MIRA, four AA batteries, the right-angle attachment, iUA, calibration standard, and a few ID Kits.The Field Carry Pouch can be attached to any of the current military pouch/backpack systems.

607507300

Pouch for TacticID-1064 ST Basic package attachments.

607507310

Pouch for TacticID-1064 ST Advanced package attachments.

607509000

TacticID-1064 ST sampling attachment providing larger spot size and sampling depth for see-through capability and preventing sample burning of colored samples.

607509010

Smart sampling attachment with a working distance of 6 mm.

607509020

Short Working Distance (SWD) Smart Attachment with a working distance of 1 mm.

607509030

Smart sampling attachment for vials. Accommodates 15 mm x 45 mm glass vials.

607509040

Long Working Distance (LWD) Smart Attachment with a working distance of 8 mm.

607509050

TacticID-1064 ST right-angle adapter for hands-free measurements.

607509060

Smart immersion probe for direct contact sampling with a working distance of approximately 5 mm.Length: 8 inchesOperating Pressure: up to 2 bar at room temperature

607509070

Smart sampling attachment for calibration and validation on the Metrohm TacticID-1064 ST.

6.2133.020

1.5V lithium AA batteries, 4 pieces.

6.2133.030

MIRA PowerPack rechargeable external battery is designed for MIRA devices. Increases the period of usable charge to more than 8 hours.

62133090

TacticID-1064 ST v2 Battery 10.8V Li ion battery.

6.2168.020

Charger with USB-C socket for MIRA PowerPack.

62169000

Universal international plug adaptor.

6.2169.010

Power Supply, 15V 3A

62169020

MS USB-C to USB-C Cable, 1.8 m.

62169030

TacticID-1064 ST USB flash drive for data sharing and system updates.

62169040

USB-C car charger for TacticID-1064 ST enables fast charging inside a vehicle.

62169050

TacticID-1064 ST Handheld Battery Charging Cradle for TacticID-1064 ST v2 Battery 10.8V Li ion battery.

6.7502.000

Glass vials suitable for use with Mira M-1 Basic and Advanced Package.

6.7502.010

Glass vials for use with MIRA systems. 15 mm x 26 mm.144 glass vials are included in the scope of delivery.

6.7502.100

Vial Holder for use with the Mira M-1 Advanced Package.

6.7503.100

MIRA Protective Boot provides an extra layer of safety to MIRA devices. Made with a chemically resistant TPA material and specially designed to work with all SmartTip Attachments, the protective boot easily installs for a ruggedized feel and extra protection.

6.7503.110

PowerPack Protective Boot provides an extra layer of safety to PowerPack. Made with a chemically resistant TPA material and specially designed to work with Mira, the protective boot easily installs for a ruggedized feel and extra protection.

6.7503.120

Autofocus Standoff Grip Kit includes a picatinny rail, grip and mounting hardware for the AFSO.

6.7503.130

Autofocus Standoff Quick Release Mount is for standard picatinny rail mounting of the AFSO.

6.7520.000

Point-and-Shoot Adapter (SWD) for the Mira M-1 Advanced Package with a focal length of 1.00 mm.

6.7520.010

Point-and-Shoot Adapter (LWD) for the Mira M-1 Advanced Package with a focal length of 7.6 mm.

67530070

Wrist Strap for the Metrohm TacticID-1064 ST.

6.7550.000

ABS/TiO2 standard for the calibration of the wavenumber scale of the Mira spectrometers.

6.7560.010

Proper laser safety precautions should be followed for the use of the MIRA products. Protection pursuant to EN 207 is offered with these protective glasses for the 785 nm laser excitation wavelength (also suitable for those who already wear eyeglasses). Work for long periods without difficulties, thanks to the lightweight construction and comfortable design of the protective laser glasses.

67560050

Laser Safety Goggles, 1064 nm Wavelength.

6.7560.200

MIRA PowerPack Kit contains the MIRA PowerPack rechargeable external battery, a charger with USB-C socket, and a charger cable with USB-C plug. Designed for MIRA systems, the kit increases the period of usable charge to more than 8 hours.

BW840000463

BAC151x Probe Adaptor to connect B&W Tek Lab grade Raman probes to BAC151x Video microscope sampling system. Remove the standard shaft and distance regulator, to use the adaptor and connect the probe head to the video microscope. 3 adaptors per pack.

BWT-840000463

BAC151x Probe Adaptor to connect B&W Tek Lab grade Raman probes to BAC151x Video microscope sampling system. Remove the standard shaft and distance regulator, to use the adaptor and connect the probe head to the video microscope. 3 adaptors per pack.

6.07506.440

The ID Kit - Au NP contains the components a Mira / Misa user requires to perform a SERS analysis using gold colloidal solution. The kit contains a disposable spatula, dropper, sample vials and a bottle of gold colloid.

607506450

The ID Kit - Ag NP contains the components a Mira / Misa user requires to perform a SERS analysis using silver colloidal solution. The kit contains a disposable spatula, dropper, sample vials, and a bottle of silver colloid.

6.06071.010

Simple-to-use software that is primarily used for downloading and analyzing data, printing reports, creating spectral libraries and operating procedures, as well as managing 21 CFR Part 11 compliance.

607510070

Laser Safety Goggles, 532 nm Wavelength.

607510130

Laser Safety Goggles, 785 nm Wavelength.

607510250

Laser Safety Goggles, 1064 nm Wavelength.

607510850

BWT-840000949

The large-spot sampling adapter is designed for use with Metrohm handheld Raman systems, providing a larger spot size and increased sampling depth to minimize the risk of sample burning, particularly for sensitive or dark-colored samples. Additionally, this adapter supports see-through capabilities when used with devices compatible with see-through software.TID-STA