You have been redirected to your local version of the requested page
Request quote
Metrohm Hyphenated EC-Raman Explorer Electrocatalysis Solution

Metrohm Hyphenated EC-Raman Explorer Electrocatalysis Solution

EC.Raman.ECAT.Explorer

  • Feature overview

Includes an Autolab modular PGSTAT302N with an Electrochemical Impedance Spectroscopy (EIS) module installed, a B&W Tek i-Raman Plus 532 H System, a B&W Tek Raman Video Microsampling System (532 nm) and an Autolab Trigger cable.

Synchronize your electrochemical measurements with in situ Raman spectroscopy providing:


• Simultaneous structural and functional information about your catalysts
• Operando measurements allow for tracking changes of the catalyst structure, identifying adsorbed products or intermediates
• A powerful modular potentiostat/galvanostat with current ranges from 10 nA to 1 A.
• An electrochemical workstation with high accuracy EIS.
• Two editable hyphenated EC-Raman procedures for the NOVA software as well as the BWSpec software for extended data analysis.
• Future-proof your research with the ability to add up to 7 additional modules post-installation.
• 532 nm laser excitation for higher Raman signal

All without complicated setups or complex training.

Equip your Metrohm Hyphenated EC-Raman Explorer Electrocatalysis Solutiondownload Scope of delivery and opt. parts (PDF)
  • Included parts
  • Optional parts
Autolab PGSTAT302N
Autolab PGSTAT302N
AUT302N.S
This high end, high current potentiostat/galvanostat, with a compliance voltage of 30 V and a bandwidth of 1 MHz, combined with our FRA32M module, is specially designed for electrochemical impedance spectroscopy.The PGSTAT302N is the successor of the popular PGSTAT30. The maximum current is 2 A, the current range can be extended to 20 A with the BOOSTER20A, the current resolution is 30 fA at a current range of 10 nA.
 Electrochemical impedance spectroscopy module
 Electrochemical impedance spectroscopy module
FRA32M.S
The FRA32M provides the means to perform impedance and electrochemical impedance measurements in combination with the Autolab. This module allows one to perform both potentiostatic and galvanostatic impedance measurements over a wide frequency range of 10 µHz to 32 MHz (limited to 1 MHz in combination with the Autolab PGSTAT). In addition to the classical EIS, the NOVA software also allows the users to modulate other outside signals such as rotation speed of a rotating disk electrode or the frequency of a light source to perform Electro-hydrodynamic or Photo-modulated impedance spectroscopy.The FRA32M module comes with a powerful fit and simulation software for the analysis of impedance data.
Raman Video Micro-Sampling System (532 nm)
Raman Video Micro-Sampling System (532 nm)
BWT-840000962
Video microscope sampling system for use with B&W Tek's lab and industrial Raman probes. Includes a 20x objective with a working distance of 16 mm. Offers manual rough and fine adjustment on the X, Y, and Z-axes, coaxial LED illuminator for target alignment, video camera for sample observation, and is compatible with standard microscope objectives. Probe not included, available separately. 532 nm configuration.BAC151C-532 
Trigger cable for PGSTAT302N Hyphenated EC-Raman Solutions 
Trigger cable for PGSTAT302N Hyphenated EC-Raman Solutions 
3500003120
This trigger cable connects the Autolab PGSTAT302N to the i-raman plus 532H and synchronizes and controls spectra acquistion through the NOVA software.