MiPT - 瑞士万通智能部分循环进样技术
AN-S-269
zh
使用智能部分循环进样技术校准氟化物、氯化物、亚硝酸盐、溴化物、硝酸盐、磷酸盐和硫酸盐，采用阴离子色谱法，在连续抑制后进行电导检测。该技术允许在 1 个校准溶液中实现 1:100 的校准范围（例如，1 μg/L 至 100 μg/L 相当于 2 μL 至 200 μL 的注入体积）。对样品进行全范围的部分循环进样，一次校准的样品浓度范围为 1 至 10'000。
Calibration of fluoride, chloride, nitrite, bromide, nitrate, phosphate and sulfate applying intelligent partial loop injection technique using anion chromatography with conductivity detection after sequential suppression. This technique allows a calibration range of 1:100 (e.g. 1 μg/L to 100 μg/L corresponding to 2 μL to 200 μL injected volume) out of 1 calibration solution. Applying the full range of partial loop injection to the samples one calibration covers a sample concentration range of 1 to 10'000.