914 pH/Conductometer with iConnect with accessories case
2.914.0110
32 nhận xét trên trang SelectScience
- Tổng quan
- Thông số kỹ thuật
Portable two-channel pH / conductivity measuring instrument with intelligent measuring input for parallel measurement of pH/mV / conductivity / TDS / salinity and temperature. You will be optimally equipped for measurements outdoors with this battery-operated measuring instrument.
- Parallel measurement of pH value and conductivity
- Analog conductivity measuring input for the 4-wire conductivity measuring cells from Metrohm
- Digital pH measuring input for the intelligent pH electrodes from Metrohm
- Robust, water-tight and dust-tight housing (IP67) for hard outdoor and laboratory use
- LCD color display with background illumination for simple legibility of the results
- USB interface for simple data export to PC or printer
- Large internal memory (10,000 data sets)
- Pin-protected User and Expert modes, prevents unwanted parameter changes
- GLP-compliant printout and data export with User ID and timestamp
- Robust field case for routine measurements in the field
Sản phẩm này đã ngừng sản xuất, nhưng vẫn được hỗ trợ.
Chuyển đến sản phẩm thay thế
Thiết bị Của bạn 914 pH/Conductometer with iConnect with accessories case
Tải về bản PDF
Tải về bản PDF- Phụ kiện tiêu chuẩn
- Phụ kiện tùy chọn
iUnitrode with Pt1000
6.0278.300
Intelligent, combined pH electrode with integrated memory chip for storing sensor data and Pt1000 temperature sensor. This electrode is particularly suitable:for pH measurements and titrations in difficult, viscous, or alkaline samples; at elevated temperatures; for long-term measurements; The fixed ground-joint diaphragm is insensitive to contamination.Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.Alternatively: reference electrolyte for measurements at T>80°C: Idrolyte, storage in Idrolyte.iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.
Conductivity measuring cell c = 0.5 cm-1 with Pt1000 (fixed cable)
6.0917.080
4-wire conductivity measuring cell with cell constant c = 0.5 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable for connecting to 912/914 Meters.Thanks to the robust/break-proof plastic shaft made of PEEK, this sensor is mechanically very resistant. The sensor is suitable for measurements of medium conductivities (15 µS/cm to 250 mS/cm), e.g., in:drinking water; surface water; wastewater;
SGJ stopper / B-14/(15)
6.1446.000
Bottle / 25 mL
6.1613.010
Hiển thị thêm
