914 pH/Conductometer with iConnect with accessories case
2.914.0110
32 Reviews на SelectScience
- Преглед на функциите
- Техническа спецификация
Portable two-channel pH / conductivity measuring instrument with intelligent measuring input for parallel measurement of pH/mV / conductivity / TDS / salinity and temperature. You will be optimally equipped for measurements outdoors with this battery-operated measuring instrument.
- Parallel measurement of pH value and conductivity
- Analog conductivity measuring input for the 4-wire conductivity measuring cells from Metrohm
- Digital pH measuring input for the intelligent pH electrodes from Metrohm
- Robust, water-tight and dust-tight housing (IP67) for hard outdoor and laboratory use
- LCD color display with background illumination for simple legibility of the results
- USB interface for simple data export to PC or printer
- Large internal memory (10,000 data sets)
- Pin-protected User and Expert modes, prevents unwanted parameter changes
- GLP-compliant printout and data export with User ID and timestamp
- Robust field case for routine measurements in the field
Този продукт е спрян от производство, но все още се поддържа.
Отидете на заменящ продукт
Оборудване Ваш 914 pH/Conductometer with iConnect with accessories case
Изтеглете принадлежностите в PDF
Изтеглете принадлежностите в PDF- включени части
- опционални части
iUnitrode with Pt1000
6.0278.300
Intelligent, combined pH electrode with integrated memory chip for storing sensor data and Pt1000 temperature sensor. This electrode is particularly suitable:for pH measurements and titrations in difficult, viscous, or alkaline samples; at elevated temperatures; for long-term measurements; The fixed ground-joint diaphragm is insensitive to contamination.Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.Alternatively: reference electrolyte for measurements at T>80°C: Idrolyte, storage in Idrolyte.iTrodes can be connected to Titrando, Ti-Touch or 913/914 meters.
Conductivity measuring cell c = 0.5 cm-1 with Pt1000 (fixed cable)
6.0917.080
4-wire conductivity measuring cell with cell constant c = 0.5 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable for connecting to 912/914 Meters.Thanks to the robust/break-proof plastic shaft made of PEEK, this sensor is mechanically very resistant. The sensor is suitable for measurements of medium conductivities (15 µS/cm to 250 mS/cm), e.g., in:drinking water; surface water; wastewater;
SGJ stopper / B-14/(15)
6.1446.000
Bottle / 25 mL
6.1613.010
Показване повече
