Chuyển hướng tin nhắn
Nhận báo giá
881 Metrohm Combustion IC

881 Metrohm Combustion IC

2.881.3030

881 Metrohm Combustion IC

vi

2.881.3030
Sản phẩm này đã ngừng sản xuất, nhưng vẫn được hỗ trợ.
Chuyển đến sản phẩm thay thế
    • Metrosep A Trap 1 - 100/4.0
    • 6.1014.000
    • High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.This column is primarily used with gradient applications.
    • <p>High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.</p><p>This column is primarily used with gradient applications.</p>
    • PCS
    • 1
    • Metrosep I Trap 1 - 100/4.0
    • 6.1014.200
    • The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
    • <p>The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.</p>
    • PCS
    • 1
    • Piston tongs
    • 6.1546.030
    • For pistons for 807 Dosing Units or cylinder units OMNIS.
    • <p>For pistons for 807 Dosing Units or cylinder units OMNIS.</p>
    • PCS
    • 2
    • Bottle attachment / GL 45 - 3 x UNF 10/32
    • 6.1602.150
    • For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.
    • <p>For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.</p>
    • PCS
    • 3
    • Bottle attachment GL 45 for eluents and reagents
    • 6.1602.160
    • For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.
    • <p>For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.</p>
    • PCS
    • 3
    • Thread adapter S 40 to GL 45
    • 6.1618.020
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • PCS
    • 2
    • PTFE capillary 0.5 mm i.d. / 3 m
    • 6.1803.030
    • Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • PCS
    • 3
    • Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    • 6.1803.130
    • Connecting capillary from the eluent components to the Eluent Synthesizer
    • Connecting capillary from the eluent components to the Eluent Synthesizer
    • PCS
    • 1
    • Adapter 807 Dosing Unit Port 4, M6 inner 
    • 6.1808.280
    • Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.
    • <p>Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.</p>
    • PCS
    • 1
    • Spiral band 0.5 m
    • 6.1815.010
    • For holding together different cables or tubing.
    • For holding together different cables or tubing.
    • PCS
    • 1
    • PEEK sample loop 250 µL
    • 6.1825.290
    • Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.
    • <p>Sample loop for &laquo;Metrohm intelligent Partial loop Technique&raquo; (MiPT) and&nbsp;for PILS (particle into liquid sampler). With 2 Peek pressure screws.</p>
    • PCS
    • 1
    • PEEK capillary 0.5 mm i.d., 15 cm
    • 6.1831.040
    • For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • PCS
    • 1
    • Holder to Waste Collector
    • 6.2057.220
    • Holder for fastening the Waste Collector to the IC instrument.
    • <p>Holder for fastening the Waste Collector to the IC instrument.</p>
    • PCS
    • 1
    • Colored sleeves for capillaries
    • 6.2251.000
    • Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
    • Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
    • PCS
    • 2
    • Absorber tube to the Absorber Module
    • 6.2421.000
    • Absorber tube for the absorption of the combustion gases from the Combustion Module.
    • <p>Absorber tube for the absorption of the combustion gases from the Combustion Module. </p>
    • PCS
    • 1
    • Tool for piston seal
    • 6.2617.010
    • For removing and assembling the piston seal for all standard pump heads
    • For removing and assembling the piston seal for all standard&nbsp;pump heads
    • PCS
    • 1
    • Adjustable wrench
    • 6.2621.000
    • Max. opening: 20 mm. For IC instruments
    • Max. opening: 20 mm. For IC instruments
    • PCS
    • 2
    • 1/4 in. wrench
    • 6.2621.050
    • For 1/4 in. screws. For IC instruments
    • For 1/4 in. screws. For IC instruments
    • PCS
    • 1
    • Capillary cutter
    • 6.2621.080
    • Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.
    • <p>Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.</p>
    • PCS
    • 1
    • Wrench
    • 6.2739.000
    • For tightening connectors
    • For tightening connectors
    • PCS
    • 2
    • Pressure screw 5x
    • 6.2744.010
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • PCS
    • 3
    • Coupling olive/UNF 10/32, 2x
    • 6.2744.034
    • Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.
    • <p>Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.</p>
    • PCS
    • 1
    • 2 x UNF 10/32 coupling
    • 6.2744.040
    • For connecting 1/16 in. capillaries. For IC instruments
    • For connecting 1/16 in. capillaries. For IC instruments
    • PCS
    • 1
    • Pressure screw short
    • 6.2744.070
    • Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries
    • Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries
    • PCS
    • 2
    • Pressure screw long
    • 6.2744.090
    • Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
    • Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
    • PCS
    • 6
    • Pressure screw PEEK UNF 1/4-28, 3 pieces
    • 6.2744.170
    • Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
    • Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
    • PCS
    • 1
    • Adapter UNF 10/32 outer / M6 inner
    • 6.2744.200
    • Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
    • Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
    • PCS
    • 1
    • Screw stopper 10/32 long
    • 6.2744.220
    • For Professional IC Instruments. For sealing unused ports of degassers and MCS.
    • For Professional IC Instruments. For sealing unused&nbsp;ports of degassers and MCS.
    • PCS
    • 8
    • PEEK pressure screw 14 mm, 3 pcs.
    • 6.2744.350
    • With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.
    • <p>With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.</p>
    • PCS
    • 2
    • Holder for absorber tubing
    • 6.2766.000
    • Holder for fastening the absorber tubing in the Absorber Module.
    • <p>Holder for fastening the absorber tubing in the Absorber Module.</p>
    • PCS
    • 1
    • Holder for inlet valve
    • 6.2766.010
    • Holder for inlet valve to the Absorber Module.
    • <p>Holder for inlet valve to the Absorber Module.</p>
    • PCS
    • 1
    • Purge tubing
    • 6.2816.040
    • With PTFE tubing and Luer connection. For syringes. For aspirating eluents.
    • With PTFE tubing and Luer connection. For syringes. For aspirating eluents.
    • PCS
    • 1
    • Aspiration filter
    • 6.2821.090
    • Pore size: 27 µm. Set of 5 pieces. For aspiration tubing (6.1834.000) and filter tubes (6.1821.040) and (6.1821.050).
    • <p>Pore size: 27 µm. Set of 5 pieces. For aspiration tubing (6.1834.000) and filter tubes (6.1821.040) and (6.1821.050).</p>
    • PCS
    • 1
    • Inlet valve PEEK
    • 6.2824.170
    • Metal-free check valve for the inlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.
    • <p>Metal-free check valve for the inlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.</p>
    • PCS
    • 1
    • 807 Dosing Unit 5 mL
    • 6.3032.150
    • 807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • IC Conductivity Detector
    • 1.850.9010
    • Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.
    • <p>Compact and intelligent high performance conductivity detector for intelligent IC instruments. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.</p>
    • PCS
    • 1
    • 920 Absorber Module
    • 1.920.0010
    • The 920 Absorber Module combines the Combustion Module with the ion chromatograph. The 920 Absorber Module ensures that the gaseous compounds of the analytes are dissolved and channeled to the IC. It is responsible for the entire Liquid Handling. In addition to Combustion IC, it can also be used for gas analysis.
    • <p>The 920 Absorber Module combines the Combustion Module with the ion chromatograph. The 920 Absorber Module ensures that the gaseous compounds of the analytes are dissolved and channeled to the IC. It is responsible for the entire Liquid Handling. In addition to Combustion IC, it can also be used for gas analysis.</p>
    • PCS
    • 1
    • Metrosep A Trap 1 - 100/4.0
    • 6.1014.000
    • High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.This column is primarily used with gradient applications.
    • <p>High-capacity anion column, which is used to purify the eluent flow. Even chemicals of the highest quality level, e.g. "Ultrapur" or "puriss", can still contain minimal anion contaminations. These are reliably held back by the Metrosep A Trap 1 - 100/4.0.</p><p>This column is primarily used with gradient applications.</p>
    • PCS
    • 1
    • Metrosep I Trap 1 - 100/4.0
    • 6.1014.200
    • The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
    • <p>The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.</p>
    • PCS
    • 1
    • Piston tongs
    • 6.1546.030
    • For pistons for 807 Dosing Units or cylinder units OMNIS.
    • <p>For pistons for 807 Dosing Units or cylinder units OMNIS.</p>
    • PCS
    • 2
    • Bottle attachment / GL 45 - 3 x UNF 10/32
    • 6.1602.150
    • For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.
    • <p>For the connection of 1/16 in. capillaries. Used in conjunction with MSM auxiliary solutions and in Metrohm Inline Sample Preparation.</p>
    • PCS
    • 3
    • Bottle attachment GL 45 for eluents and reagents
    • 6.1602.160
    • For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.
    • <p>For eluent, reagent, and rinsing bottles, with connectors for the adsorber tube and the aspiration tubing.</p>
    • PCS
    • 3
    • Thread adapter S 40 to GL 45
    • 6.1618.020
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • Adapter for bottles with S40 thread (Merck...) to GL45.
    • PCS
    • 2
    • PTFE capillary 0.5 mm i.d. / 3 m
    • 6.1803.030
    • Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • Capillary for inline dialysis, for Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • PCS
    • 3
    • Capillary 1/8 in. / 1/16 in. i.d. / 1.5 m
    • 6.1803.130
    • Connecting capillary from the eluent components to the Eluent Synthesizer
    • Connecting capillary from the eluent components to the Eluent Synthesizer
    • PCS
    • 1
    • Adapter 807 Dosing Unit Port 4, M6 inner 
    • 6.1808.280
    • Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.
    • <p>Adapter for using Port 4 of the 807 dosing Unit for connection with an FEP tubing / M6.</p>
    • PCS
    • 1
    • Spiral band 0.5 m
    • 6.1815.010
    • For holding together different cables or tubing.
    • For holding together different cables or tubing.
    • PCS
    • 1
    • PEEK sample loop 250 µL
    • 6.1825.290
    • Sample loop for «Metrohm intelligent Partial loop Technique» (MiPT) and for PILS (particle into liquid sampler). With 2 Peek pressure screws.
    • <p>Sample loop for &laquo;Metrohm intelligent Partial loop Technique&raquo; (MiPT) and&nbsp;for PILS (particle into liquid sampler). With 2 Peek pressure screws.</p>
    • PCS
    • 1
    • PEEK capillary 0.5 mm i.d., 15 cm
    • 6.1831.040
    • For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • For inline dialysis. For IC Dialysis Unit, IC Dialysis Sample Processor, IC Liquid Handling Dialysis Unit
    • PCS
    • 1
    • Holder to Waste Collector
    • 6.2057.220
    • Holder for fastening the Waste Collector to the IC instrument.
    • <p>Holder for fastening the Waste Collector to the IC instrument.</p>
    • PCS
    • 1
    • Colored sleeves for capillaries
    • 6.2251.000
    • Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
    • Colored pieces of heat shrink tubing for capillary coding. Three pieces each of five different colors.
    • PCS
    • 2
    • Absorber tube to the Absorber Module
    • 6.2421.000
    • Absorber tube for the absorption of the combustion gases from the Combustion Module.
    • <p>Absorber tube for the absorption of the combustion gases from the Combustion Module. </p>
    • PCS
    • 1
    • Tool for piston seal
    • 6.2617.010
    • For removing and assembling the piston seal for all standard pump heads
    • For removing and assembling the piston seal for all standard&nbsp;pump heads
    • PCS
    • 1
    • Adjustable wrench
    • 6.2621.000
    • Max. opening: 20 mm. For IC instruments
    • Max. opening: 20 mm. For IC instruments
    • PCS
    • 2
    • 1/4 in. wrench
    • 6.2621.050
    • For 1/4 in. screws. For IC instruments
    • For 1/4 in. screws. For IC instruments
    • PCS
    • 1
    • Capillary cutter
    • 6.2621.080
    • Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.
    • <p>Cutting tool for simple cutting of plastic capillaries, 1/16" and 1/8", including 5 replacement blades.</p>
    • PCS
    • 1
    • Wrench
    • 6.2739.000
    • For tightening connectors
    • For tightening connectors
    • PCS
    • 2
    • Pressure screw 5x
    • 6.2744.010
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • With UNF 10/32 connection. For the connection of PEEK capillaries
    • PCS
    • 3
    • Coupling olive/UNF 10/32, 2x
    • 6.2744.034
    • Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.
    • <p>Connection between pressure screw and pump tubing. 2 pieces. For IC instruments with peristaltic pump.</p>
    • PCS
    • 1
    • 2 x UNF 10/32 coupling
    • 6.2744.040
    • For connecting 1/16 in. capillaries. For IC instruments
    • For connecting 1/16 in. capillaries. For IC instruments
    • PCS
    • 1
    • Pressure screw short
    • 6.2744.070
    • Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries
    • Short version. With UNF 10/32 connection. 5 pieces. For the connection of PEEK capillaries
    • PCS
    • 2
    • Pressure screw long
    • 6.2744.090
    • Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
    • Long version. With UNF 10/32 connection. 2 pieces. For the connection of PEEK capillaries (MCS and Sample degasser)
    • PCS
    • 6
    • Pressure screw PEEK UNF 1/4-28, 3 pieces
    • 6.2744.170
    • Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
    • Fixing connecting capillaries of the eluent components at the Eluent Synthesizer
    • PCS
    • 1
    • Adapter UNF 10/32 outer / M6 inner
    • 6.2744.200
    • Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
    • Connecting 1/16 in. PEEK capillaries and transfer tubing (M6)
    • PCS
    • 1
    • Screw stopper 10/32 long
    • 6.2744.220
    • For Professional IC Instruments. For sealing unused ports of degassers and MCS.
    • For Professional IC Instruments. For sealing unused&nbsp;ports of degassers and MCS.
    • PCS
    • 8
    • PEEK pressure screw 14 mm, 3 pcs.
    • 6.2744.350
    • With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.
    • <p>With UNF 10/32 connector. For the connection of PEEK capillaries in the Absorber Module.</p>
    • PCS
    • 2
    • Holder for absorber tubing
    • 6.2766.000
    • Holder for fastening the absorber tubing in the Absorber Module.
    • <p>Holder for fastening the absorber tubing in the Absorber Module.</p>
    • PCS
    • 1
    • Holder for inlet valve
    • 6.2766.010
    • Holder for inlet valve to the Absorber Module.
    • <p>Holder for inlet valve to the Absorber Module.</p>
    • PCS
    • 1
    • Purge tubing
    • 6.2816.040
    • With PTFE tubing and Luer connection. For syringes. For aspirating eluents.
    • With PTFE tubing and Luer connection. For syringes. For aspirating eluents.
    • PCS
    • 1
    • Aspiration filter
    • 6.2821.090
    • Pore size: 27 µm. Set of 5 pieces. For aspiration tubing (6.1834.000) and filter tubes (6.1821.040) and (6.1821.050).
    • <p>Pore size: 27 µm. Set of 5 pieces. For aspiration tubing (6.1834.000) and filter tubes (6.1821.040) and (6.1821.050).</p>
    • PCS
    • 1
    • Inlet valve PEEK
    • 6.2824.170
    • Metal-free check valve for the inlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.
    • <p>Metal-free check valve for the inlet side of the IC pump heads of the devices 940, 930, 925, 883, 882, 881, and 850.</p>
    • PCS
    • 1
    • 807 Dosing Unit 5 mL
    • 6.3032.150
    • 807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 5 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • 807 Dosing Unit 10 mL
    • 6.3032.210
    • 807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 10 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1