OMNIS Actuator Unit
2.1056.0410
- Genel özellikler
The OMNIS Actuator Unit functions as a drive for various injectors, selectors, and the OMNIS MSM Unit in the OMNIS IC System:
- In combination with an injector valve, the OMNIS Actuator Unit is used for the injection of sample into the flow of the eluent.
- Equipped with a selector valve, the OMNIS Actuator Unit serves as a toggle switch between multiple liquids.
- Together with a suppressor rotor, the OMNIS MSM Unit forms a Metrohm Suppressor Module (MSM). The MSM serves as a chemical suppressor in the OMNIS IC System.
Daha yakından tanıyın OMNIS Actuator Unit
İngilizce
Manual OMNIS ICEkipmanlar Size özel OMNIS Actuator Unit
Aksesuarlar PDF dosyasını indir
Aksesuarlar PDF dosyasını indir- Opsiyonel parçalar
Rotor housing
6.02842.040
Rotor housing to upgrade an OMNIS Actuator Unit into an OMNIS MSM Unit.
OMNIS IC equip.: AutoSwitch
6.05332.130
Accessory set for AutoSwitch in OMNIS IC: Many samples require analysis of multiple analytes, such as anions and cations. The OMNIS IC M can be easily upgraded to perform AutoSwitch analysis. This enables automated serial execution, for example, of anion and cation analyses. Automatic switching between different analyses is possible with an additional injector and two 3/2-way valves.Prerequisites:OMNIS IC M, including:available OMNIS Actuator Unit equipped with 6/2 or 7/3 injector (minimum 1 x 7/3 injector is required);
available position on the OMNIS Column Thermostat Unit;
AS/ASCOOL equipped with 1x switching valve 3/2, M6 and 1x switching valve 3/2, UNF;
Injector 6/2 kit
6.05801.170
Upgrade kit to extend the OMNIS Actuator Unit with a metal-free 6/2 injector with UNF 10/32 connections. Injector specifications: Bore ID: 0.4 mm;
Rotor material: Valcon E;
Stator material: PAEK/Carbon Fiber;
Maximum pressure: 35 MPa;
Prerequisites:210560410 OMNIS Actuator Unit Info: This upgrade must be installed by an authorized Metrohm service technician.
Injector 7/3 kit
6.05801.180
Upgrade kit to extend the OMNIS Actuator Unit with a metal-free 7/3 injector with UNF 10/32 connections. Injector specifications: Bore ID: 0.4 mm;
Rotor material: Valcon E;
Stator material: PAEK/Carbon Fiber;
Maximum pressure: 35 Mpa;
Prerequisites: 2.10560.410 OMNIS Actuator Unit Info: This upgrade must be installed by an authorized Metrohm service technician.
Daha fazlası