Separate Ag-rod electrode with AgBr coating
6.0331.010BR
- Överblick över funktioner
This metal electrode has to be used in combination with a reference electrode (c(KNO3) = 1 mol/L as reference electrolyte) and is well suited for precipitation titrations (titrant silver nitrate). The robust shaft made of polypropylene and the metal rod can be replaced separately. The silver rod is coated with bromide (AgBr) for higher sensitivity.
Produkten har upphört men stöds fortfarande
Utrustning Din Separate Ag-rod electrode with AgBr coating
Scope of delivery and opt. parts (PDF)
Scope of delivery and opt. parts (PDF)- valfria delar
Ag/AgCl reference electrode (length 12.5 cm)
6.0729.100
Silver/silver chloride reference electrode with Double-Junction System and separate shielding, installation length 10 cm.This reference electrode is well-suited for:Nonaqueous samples; Differential potentiometry; The standard ground-joint 14/15 enables easy assembly, and the flexible ground-joint diaphragm, which is insensitive to contamination, can be replaced at any time. The reference electrolyte and the bridge electrolyte can be selected freely according to use, and are easy to replace. The sensor is supplied without electrolyte filling.
Electrolyte KNO3-1mol/L 250 mL
6.2310.010
Electrolyte solution KNO3 1 M (reference electrolyte for combined silver electrodes)
Electrode shaft
6.1241.030
Electrode shaft for separate metal pin electrodes
Strand / 1 m / 2 x B
6.2106.020
Electrode cable with 2 x plug B (4 mm) for connecting electrodes with plug-in head B