930 Compact IC Flex Oven/Deg/MB

Basic set of accessories for a Professional IC Vario or Compact IC Flex.

Set of accessories for the ONE Module (IC pump with injector) for Professional IC Vario and Compact IC Flex instruments.

Compact and intelligent high performance conductivity detector for intelligent IC instruments. Optimized for microbore columns. Outstanding temperature stability, the complete signal processing within the protected detector block and the latest generation of DSP – Digital Signal Processing – guarantee the highest precision of the measurement. No change of measuring ranges (not even automatic ones) is required, due to the dynamic working range.Typical areas of application:Anion or cation determinations with chemical suppression, sequential suppression or without suppression and conductivity detection; Optimized for microbore (2 mm) applications, ideally suitable for coupling techniques (IC-MS or IC-ICP/MS); Specification at a glance:0–15000 μS/cm without range switching; Cell volume: 0.3 μL; Ring-shaped electrodes made of stainless steel X2CrNiMo17-12-2 (316 L), compatible with MSA; Maximum operating pressure: 10.0 MPa (100 bar); Cell temperature: 20–50 °C in increments of 5 °C; Temperature stability: 0.001 °C; Baseline noise: 0.2 nS/cm typical for sequential suppression; Capillaries: ID 0.18 mm; Supported with MagIC Net 4.1 and higher

Compact and intelligent amperometric detector for intelligent IC instruments. Outstanding selectivity due to the four measuring modes: DC, PAD, flexIPAD and CV, as well as the excellent signal/noise ratio and the very fast stabilization of the measuring signal guarantee the highest in measurement precision.

The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).

The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 Dosino.