Você foi redirecionado para a página solicitada
Pedir orçamento
Rotating disk electrode with M3 thread

Rotating disk electrode with M3 thread

AUT.RDE.M3

Rotating disk electrode with M3 thread

en

AUT.RDE.M3

Visão geral

The Autolab RDE with an M3 thread is a high-end rotating disk electrode for measurements on systems where high rotation speed and low noise are required. The unit can go up to 10,000 rpm, a liquid Hg contact guarantees low noise. The PCTFE shaft has been designed to fit in Metrohm cell vessels, but also fits on most other electrochemical cells. The tip diameter is 8 mm with a glass shaft and an active surface diameter of 2 mm.
The rotation speed of the RDE is controlled manually with the button on the front of the motor control unit. The RDE can also be controlled remotely with the Autolab software. The rotation speed can be varied continuously between 100 and 10,000 rpm with a resolution of 1 rpm.

Especificações técnicas

Rotation rate range100 - 10000 RPM
Acceleration and deceleration rate (RPM/s)4000.0
Maximum current in ampère0.5
Number of electrodes1.0
    • 2 mm platinum electrode tip for CVS
    • 6.1204.610
    • Metal electrode tip made of platinum (Pt), diameter of electrode disk 2 mm ±0.05 mm, polished surface, shaft made of glass, M3 thread connection. Concentricity error: < 0.3 mm. Temperature range: 0 - 50 °C.
    • <p>Metal electrode tip made of platinum (Pt), diameter of electrode disk 2 mm ±0.05 mm, polished surface, shaft made of glass, M3 thread connection. Concentricity error: &lt; 0.3 mm. Temperature range: 0 - 50 °C.</p>
    • PCS
    • 1
    • AUT.RDE.CTRL.S
    • AUT.RDE.CTRL.S
    • Metrohm Autolab Motor controller unit used to control the rotation rate of the rotating disk, rotating cylinder and rotating ring-disk electrodes. It can be used manually or remotely from the NOVA ot INTELLO software
    • <p>Metrohm Autolab Motor controller unit used to control the rotation rate of the rotating disk, rotating cylinder and rotating ring-disk electrodes. It can be used manually or remotely from the NOVA ot INTELLO software</p>
    • PCS
    • 1
    • AUT.RDE.ELCBL
    • AUT.RDE.ELCBL
    • Electrode cable to connect the Metrohm Autolab potentiostats/galvanostats to the rotating disk and rotating cylinder electrodes.
    • <p>Electrode cable to connect the Metrohm Autolab potentiostats/galvanostats to the rotating disk and rotating cylinder electrodes.</p>
    • PCS
    • 1
    • AUT.RDE.ROT.M3.S
    • AUT.RDE.ROT.M3.S
    • Autolab rotator for the rotating disk electrode with M3 thread
    • <p>Autolab rotator for the rotating disk electrode with M3 thread</p>
    • PCS
    • 1
    • 2 mm platinum electrode tip for CVS
    • 6.1204.610
    • Metal electrode tip made of platinum (Pt), diameter of electrode disk 2 mm ±0.05 mm, polished surface, shaft made of glass, M3 thread connection. Concentricity error: < 0.3 mm. Temperature range: 0 - 50 °C.
    • <p>Metal electrode tip made of platinum (Pt), diameter of electrode disk 2 mm ±0.05 mm, polished surface, shaft made of glass, M3 thread connection. Concentricity error: &lt; 0.3 mm. Temperature range: 0 - 50 °C.</p>
    • PCS
    • 1
    • AUT.RDE.CTRL.S
    • AUT.RDE.CTRL.S
    • Metrohm Autolab Motor controller unit used to control the rotation rate of the rotating disk, rotating cylinder and rotating ring-disk electrodes. It can be used manually or remotely from the NOVA ot INTELLO software
    • <p>Metrohm Autolab Motor controller unit used to control the rotation rate of the rotating disk, rotating cylinder and rotating ring-disk electrodes. It can be used manually or remotely from the NOVA ot INTELLO software</p>
    • PCS
    • 1
    • AUT.RDE.ELCBL
    • AUT.RDE.ELCBL
    • Electrode cable to connect the Metrohm Autolab potentiostats/galvanostats to the rotating disk and rotating cylinder electrodes.
    • <p>Electrode cable to connect the Metrohm Autolab potentiostats/galvanostats to the rotating disk and rotating cylinder electrodes.</p>
    • PCS
    • 1
    • AUT.RDE.ROT.M3.S
    • AUT.RDE.ROT.M3.S
    • Autolab rotator for the rotating disk electrode with M3 thread
    • <p>Autolab rotator for the rotating disk electrode with M3 thread</p>
    • PCS
    • 1
    • Glassy carbon electrode tip, shaft made of glass.  
    • 6.1204.600
    • Carbon electrode tip made of Glassy-Carbon (GC). Diameter of electrode disk 2 mm ±0.1 mm, polished surface, shaft made of glass, M3 thread connection, concentricity deviation: <0.25 mm. Temperature range: 0 - 50°C. 
    • <p>Carbon electrode tip made of Glassy-Carbon (GC). Diameter of electrode disk 2 mm ±0.1 mm, polished surface, shaft made of glass, M3 thread connection, concentricity deviation: &lt;0.25 mm. Temperature range: 0 - 50°C. </p>
    • PCS
    • 1