Metrohm Hyphenated EC-Raman Battery Solution
EC.Raman.Battery
Metrohm Hyphenated EC-Raman Battery Solution
ja
EC.Raman.Battery
特長
An Autolab modular PGSTAT302N with an Electrochemical Impedance Spectroscopy (EIS) module installed and a B&W Tek i-Raman Plus 532 H System are the foundation of this system. Depending on your cell size and design you can add either a B&W Tek Raman Video Micro-Sampling System (532 nm), or the B&W Tek Raman Probe Holder.Get ready to track age-induced structural changes, electrolyte decomposition, and solid electrolyte interphase (SEI) formation with your EC-Raman Battery Solution.It is easy to get started, see instant results, all with an instrument you can upgrade as your research progresses.• Two editable hyphenated EC-Raman procedures for the NOVA software as well as the BWSpec software for extended data analysis.• An electrochemical workstation with high accuracy EIS.• Future-proof your research with the ability to add up to 7 additional modules post-installation.Choose, depending on your cell size, either a B&W Tek Raman Video Microsampling System (532 nm), or the B&W Tek Raman Probe Holder. B&W Tek Raman Video Microsampling System (532 nm) can accommodate cells up 30 mm high.B&W Tek Raman Probe Holder can accommodate large battery-dedicated EC-Raman cells.
-
- Autolab PGSTAT302N
- AUT302N.S
- This high end, high current potentiostat/galvanostat, with a compliance voltage of 30 V and a bandwidth of 1 MHz, combined with our FRA32M module, is specially designed for electrochemical impedance spectroscopy.The PGSTAT302N is the successor of the popular PGSTAT30. The maximum current is 2 A, the current range can be extended to 20 A with the BOOSTER20A, the current resolution is 30 fA at a current range of 10 nA.
- PCS
- 1
- Electrochemical impedance spectroscopy module
- FRA32M.S
- The FRA32M provides the means to perform impedance and electrochemical impedance measurements in combination with the Autolab. This module allows one to perform both potentiostatic and galvanostatic impedance measurements over a wide frequency range of 10 µHz to 32 MHz (limited to 1 MHz in combination with the Autolab PGSTAT). In addition to the classical EIS, the NOVA software also allows the users to modulate other outside signals such as rotation speed of a rotating disk electrode or the frequency of a light source to perform Electro-hydrodynamic or Photo-modulated impedance spectroscopy.The FRA32M module comes with a powerful fit and simulation software for the analysis of impedance data.
- PCS
- 1
- Trigger cable for PGSTAT302N Hyphenated EC-Raman Solutions
- 3500003120
- This trigger cable connects the Autolab PGSTAT302N to the i-raman plus 532H and synchronizes and controls spectra acquistion through the NOVA software.
- PCS
- 1
-
- Autolab PGSTAT302N
- AUT302N.S
- This high end, high current potentiostat/galvanostat, with a compliance voltage of 30 V and a bandwidth of 1 MHz, combined with our FRA32M module, is specially designed for electrochemical impedance spectroscopy.The PGSTAT302N is the successor of the popular PGSTAT30. The maximum current is 2 A, the current range can be extended to 20 A with the BOOSTER20A, the current resolution is 30 fA at a current range of 10 nA.
- PCS
- 1
- Electrochemical impedance spectroscopy module
- FRA32M.S
- The FRA32M provides the means to perform impedance and electrochemical impedance measurements in combination with the Autolab. This module allows one to perform both potentiostatic and galvanostatic impedance measurements over a wide frequency range of 10 µHz to 32 MHz (limited to 1 MHz in combination with the Autolab PGSTAT). In addition to the classical EIS, the NOVA software also allows the users to modulate other outside signals such as rotation speed of a rotating disk electrode or the frequency of a light source to perform Electro-hydrodynamic or Photo-modulated impedance spectroscopy.The FRA32M module comes with a powerful fit and simulation software for the analysis of impedance data.
- PCS
- 1
- Trigger cable for PGSTAT302N Hyphenated EC-Raman Solutions
- 3500003120
- This trigger cable connects the Autolab PGSTAT302N to the i-raman plus 532H and synchronizes and controls spectra acquistion through the NOVA software.
- PCS
- 1
-
- ビデオマイクロスコープ付きラマンサンプル採取システム (532 nm)
- BWT-840000962
- ラボおよび産業用のB&W Tek社製ラマンプローブを用いた使用のためのビデオマイクロスコープ付きサンプル採取システム。作動距離16 mmで20倍拡大の対物レンズ付き。X、Y、およびZ軸方向の粗調整ならびに微調整、ターゲティング用同軸LED照明、サンプル観察のためのビデオカメラが使用可能であり、標準マイクロスコープ対物レンズと互換性があります。プローブは含まれておらず、個別にご購入いただけます。532 nmコンフィグレーション。BAC151C-532
- <p>ラボおよび産業用のB&W Tek社製ラマンプローブを用いた使用のためのビデオマイクロスコープ付きサンプル採取システム。作動距離16 mmで20倍拡大の対物レンズ付き。X、Y、およびZ軸方向の粗調整ならびに微調整、ターゲティング用同軸LED照明、サンプル観察のためのビデオカメラが使用可能であり、標準マイクロスコープ対物レンズと互換性があります。プローブは含まれておらず、個別にご購入いただけます。532 nmコンフィグレーション。</p><p>BAC151C-532<br /> </p>
- PCS
- 1
- ビデオマイクロスコープ対物レンズ、50倍拡大
- BWT-840000325
- マイクロスコープ対物レンズ、無限補正、50倍拡大、作業距離 (mm) = 9.15、焦点距離 (mm) = 4、開口数 (NA) = 0.55。RML150A
- <p>マイクロスコープ対物レンズ、無限補正、50倍拡大、作業距離 (mm) = 9.15、焦点距離 (mm) = 4、開口数 (NA) = 0.55。</p><p>RML150A<br /> </p>
- PCS
- 1
- ラマンプローブホルダー
- BWT-840000395
- ラボ品質のB&W Tek社製ラマンプローブを用いた使用のためのプローブホルダー。手動の XYZ 粗調整および微調整を提供します。
- <p>ラボ品質のB&W Tek社製ラマンプローブを用いた使用のためのプローブホルダー。手動の XYZ 粗調整および微調整を提供します。</p>
- PCS
- 1