Você foi redirecionado para a página solicitada
Pedir orçamento
Metrohm Hyphenated EC-Raman Battery Solution

Metrohm Hyphenated EC-Raman Battery Solution

EC.Raman.Battery

Metrohm Hyphenated EC-Raman Battery Solution

en

EC.Raman.Battery

Visão geral

An Autolab modular PGSTAT302N with an Electrochemical Impedance Spectroscopy (EIS) module installed and a B&W Tek i-Raman Plus 532 H System are the foundation of this system. Depending on your cell size and design you can add either a B&W Tek Raman Video Micro-Sampling System (532 nm), or the B&W Tek Raman Probe Holder.

Get ready to track age-induced structural changes, electrolyte decomposition, and solid electrolyte interphase (SEI) formation with your EC-Raman Battery Solution.

It is easy to get started, see instant results, all with an instrument you can upgrade as your research progresses.


• Two editable hyphenated EC-Raman procedures for the NOVA software as well as the BWSpec software for extended data analysis.
• An electrochemical workstation with high accuracy EIS.
• Future-proof your research with the ability to add up to 7 additional modules post-installation.

Choose, depending on your cell size, either a B&W Tek Raman Video Microsampling System (532 nm), or the B&W Tek Raman Probe Holder.

 

B&W Tek Raman Video Microsampling System (532 nm) can accommodate cells up 30 mm high.
B&W Tek Raman Probe Holder can accommodate large battery-dedicated EC-Raman cells.
    • Autolab PGSTAT302N
    • AUT302N.S
    • This high end, high current potentiostat/galvanostat, with a compliance voltage of 30 V and a bandwidth of 1 MHz, combined with our FRA32M module, is specially designed for electrochemical impedance spectroscopy.The PGSTAT302N is the successor of the popular PGSTAT30. The maximum current is 2 A, the current range can be extended to 20 A with the BOOSTER20A, the current resolution is 30 fA at a current range of 10 nA.
    • <p>This high end, high current potentiostat/galvanostat, with a compliance voltage of 30 V and a bandwidth of 1 MHz, combined with our FRA32M module, is specially designed for electrochemical impedance spectroscopy.</p><p>The PGSTAT302N is the successor of the popular PGSTAT30. The maximum current is 2 A, the current range can be extended to 20 A with the BOOSTER20A, the current resolution is 30 fA at a current range of 10 nA.</p>
    • PCS
    • 1
    •  Electrochemical impedance spectroscopy module
    • FRA32M.S
    • The FRA32M provides the means to perform impedance and electrochemical impedance measurements in combination with the Autolab. This module allows one to perform both potentiostatic and galvanostatic impedance measurements over a wide frequency range of 10 µHz to 32 MHz (limited to 1 MHz in combination with the Autolab PGSTAT). In addition to the classical EIS, the NOVA software also allows the users to modulate other outside signals such as rotation speed of a rotating disk electrode or the frequency of a light source to perform Electro-hydrodynamic or Photo-modulated impedance spectroscopy.The FRA32M module comes with a powerful fit and simulation software for the analysis of impedance data.
    • <p>The FRA32M provides the means to perform impedance and electrochemical impedance measurements in combination with the Autolab. This module allows one to perform both potentiostatic and galvanostatic impedance measurements over a wide frequency range of 10 µHz to 32 MHz (limited to 1 MHz in combination with the Autolab PGSTAT). In addition to the classical EIS, the NOVA software also allows the users to modulate other outside signals such as rotation speed of a rotating disk electrode or the frequency of a light source to perform Electro-hydrodynamic or Photo-modulated impedance spectroscopy.</p><p>The FRA32M module comes with a powerful fit and simulation software for the analysis of impedance data.</p>
    • PCS
    • 1
    • Trigger cable for PGSTAT302N Hyphenated EC-Raman Solutions 
    • 3500003120
    • This trigger cable connects the Autolab PGSTAT302N to the i-raman plus 532H and synchronizes and controls spectra acquistion through the NOVA software.
    • <p>This trigger cable connects the Autolab PGSTAT302N to the i-raman plus 532H and synchronizes and controls spectra acquistion through the NOVA software.</p>
    • PCS
    • 1
    • Autolab PGSTAT302N
    • AUT302N.S
    • This high end, high current potentiostat/galvanostat, with a compliance voltage of 30 V and a bandwidth of 1 MHz, combined with our FRA32M module, is specially designed for electrochemical impedance spectroscopy.The PGSTAT302N is the successor of the popular PGSTAT30. The maximum current is 2 A, the current range can be extended to 20 A with the BOOSTER20A, the current resolution is 30 fA at a current range of 10 nA.
    • <p>This high end, high current potentiostat/galvanostat, with a compliance voltage of 30 V and a bandwidth of 1 MHz, combined with our FRA32M module, is specially designed for electrochemical impedance spectroscopy.</p><p>The PGSTAT302N is the successor of the popular PGSTAT30. The maximum current is 2 A, the current range can be extended to 20 A with the BOOSTER20A, the current resolution is 30 fA at a current range of 10 nA.</p>
    • PCS
    • 1
    •  Electrochemical impedance spectroscopy module
    • FRA32M.S
    • The FRA32M provides the means to perform impedance and electrochemical impedance measurements in combination with the Autolab. This module allows one to perform both potentiostatic and galvanostatic impedance measurements over a wide frequency range of 10 µHz to 32 MHz (limited to 1 MHz in combination with the Autolab PGSTAT). In addition to the classical EIS, the NOVA software also allows the users to modulate other outside signals such as rotation speed of a rotating disk electrode or the frequency of a light source to perform Electro-hydrodynamic or Photo-modulated impedance spectroscopy.The FRA32M module comes with a powerful fit and simulation software for the analysis of impedance data.
    • <p>The FRA32M provides the means to perform impedance and electrochemical impedance measurements in combination with the Autolab. This module allows one to perform both potentiostatic and galvanostatic impedance measurements over a wide frequency range of 10 µHz to 32 MHz (limited to 1 MHz in combination with the Autolab PGSTAT). In addition to the classical EIS, the NOVA software also allows the users to modulate other outside signals such as rotation speed of a rotating disk electrode or the frequency of a light source to perform Electro-hydrodynamic or Photo-modulated impedance spectroscopy.</p><p>The FRA32M module comes with a powerful fit and simulation software for the analysis of impedance data.</p>
    • PCS
    • 1
    • Trigger cable for PGSTAT302N Hyphenated EC-Raman Solutions 
    • 3500003120
    • This trigger cable connects the Autolab PGSTAT302N to the i-raman plus 532H and synchronizes and controls spectra acquistion through the NOVA software.
    • <p>This trigger cable connects the Autolab PGSTAT302N to the i-raman plus 532H and synchronizes and controls spectra acquistion through the NOVA software.</p>
    • PCS
    • 1
    • Raman Video Micro-Sampling System (532 nm)
    • BWT-840000962
    • Video microscope sampling system for use with B&W Tek's lab and industrial Raman probes. Includes a 20x objective with a working distance of 16 mm. Offers manual rough and fine adjustment on the X, Y, and Z-axes, coaxial LED illuminator for target alignment, video camera for sample observation, and is compatible with standard microscope objectives. Probe not included, available separately. 532 nm configuration.BAC151C-532 
    • <p>Video microscope sampling system for use with B&amp;W Tek&#039;s lab and industrial Raman probes. Includes a 20x objective with a working distance of 16 mm. Offers manual rough and fine adjustment on the X, Y, and Z-axes, coaxial LED illuminator for target alignment, video camera for sample observation, and is compatible with standard microscope objectives. Probe not included, available separately. 532 nm configuration.</p><p>BAC151C-532<br /> </p>
    • PCS
    • 1
    • Video Microscope Objective, 50x (RML150A)
    • BWT-840000325
    • Microscope objective, infinity-corrected, 50x, working distance (mm) = 9.15, focal length (mm) = 4, numerical aperture (NA) = 0.55.RML150A 
    • <p>Microscope objective, infinity-corrected, 50x, working distance (mm) &#61; 9.15, focal length (mm) &#61; 4, numerical aperture (NA) &#61; 0.55.</p><p>RML150A<br /> </p>
    • PCS
    • 1
    • Raman Probe Holder
    • BWT-840000395
    • Probe holder for use with B&W Tek's lab-grade Raman probes. Provides manual coarse and fine XYZ adjustments.
    • <p>Probe holder for use with B&amp;W Tek&#039;s lab-grade Raman probes. Provides manual coarse and fine XYZ adjustments.</p>
    • PCS
    • 1