重定向消息
获取报价

硝酸锂的化验

AN-T-216

2020-06

zh

Reliable and fully automated determination by potentiometric titration

硝酸锂是一种氧化剂，用于制造红色烟花和照明弹。此外，三水硝酸锂化合物吸热性能良好，可用于热能储存。由于硝酸锂是一种吸湿性物质，因此在用于合成或其他用途之前，必须首先验证其纯度。 纯度检测是通过在乙醇溶液中进行锂和氟化物之间的全自动沉淀滴定来完成的。滴定法的好处在于，硝酸锂溶解在乙醇中后无需像 ICP-MS 等其他技术那样进行稀释。

Lithium nitrate is an oxidizing agent used in the manufacture of red-colored fireworks and flares. In addition, the lithium nitrate trihydrate compound absorbs heat well and can be used for thermal energy storage at its melting temperature of 30 °C.

Lithium nitrate is a hygroscopic substance and therefore the purity needs verification before it is used for synthesis or other applications.

The purity can be easily determined using a fully automated titration system. The assay is done by a precipitation titration between lithium and fluoride in an ethanolic solution. The benefit of titration is that the lithium nitrate does not need to be diluted after dissolving in ethanol as with other techniques such as ICP-MS.

The application is demonstrated on lithium nitrate with a purity of >98%. No sample preparation is needed.

Figure 1. OMNIS Sample Robot, OMNIS Dosing module, and OMNIS Advanced Titrator equipped with fluoride ion selective electrode for the assay of lithium nitrate.

This analysis is carried out on an automated system consisting of an OMNIS Advanced Titrator and an OMNIS Sample Robot S equipped with a fluoride ion selective electrode.

After weighing the sample into the sample beaker, all further steps are automatically carried out by the system. The assay is performed by a precipitation titration with ammonium fluoride in an ethanolic solution.

With this method a purity of 100.85% (n = 5, SD(rel) = 0.45%) is determined. This value corresponds to the theoretical value of > 98%.

Figure 2. Example titration curve of the assay of lithium nitrate.

Titration is a precise and reliable method to determine lithium nitrate. In comparison to other techniques such as ICP-MS, it is not necessary to dilute the lithium nitrate sample, greatly increasing the accuracy of the analysis.

Using an OMNIS Sample Robot allows the fully automated measurement of up to four samples simultaneously. The OMNIS System offers the opportunity to customize the system according to your needs, and expand it for other required titration applications.

咨询

瑞士万通中国

北京市海淀区上地东路1号院1号楼7层702
100085 北京

咨询

Internal reference: AW I CH1-1303-052020