Chuyển hướng tin nhắn
Nhận báo giá
Combustion Oven (TEI)

Combustion Oven (TEI)

2.0136.0600

Combustion Oven (TEI)

vi

2.0136.0600

Tổng quan

The Combustion Oven (TEI) is the central unit for pyrohydrolytic combustion of samples as preparation for subsequent analysis with ion chromatography.
    • Boat Introduction Module, quartz
    • 6.07311.010
    • Boat Introduction Module for the Combustion IC for use with the quartz combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.It also includes a pair of tweezers and a petri dish for handling the sample boat.
    • <p>Boat Introduction Module for the Combustion IC for use with the quartz combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.<br/>It also includes a pair of tweezers and a petri dish for handling the sample boat.</p>
    • PCS
    • 1
    • Boat Introduction Module, ceramic 
    • 6.07311.020
    • Boat Introduction Module for the Combustion IC for use with the ceramic combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.It also includes a pair of tweezers and a petri dish for handling the sample boat.
    • <p>Boat Introduction Module for the Combustion IC for use with the ceramic combustion tube. This module uses a sample boat to transfer samples into the oven for combustion.<br/>It also includes a pair of tweezers and a petri dish for handling the sample boat.</p>
    • PCS
    • 1
    • Liquid Introduction Module, manual (TEI)
    • 6.07311.030
    • The Liquid Introduction Module enables the combustion of liquid samples by using an automatic syringe to inject the sample directly. The module can be used for samples with a boiling point < 420 °C.This module can also guide gaseous or LPG samples into the oven from the GLS Sampler CIC.
    • <p>The Liquid Introduction Module enables the combustion of liquid samples by using an automatic syringe to inject the sample directly. The module can be used for samples with a boiling point &lt; 420 °C.<br/>This module can also guide gaseous or LPG samples into the oven from the GLS Sampler CIC.</p>
    • PCS
    • 1
    • Liquid Introduction Module, automated (TEI)
    • 6.07311.040
    • The Liquid Introduction Module enables the combustion of liquid samples by using the Liquid Autosampler CIC to inject the sample directly. The module can be used for samples with a boiling point < 420 °C.This module can also guide gaseous or LPG samples from the GLS Sampler CIC into the oven.
    • <p>The Liquid Introduction Module enables the combustion of liquid samples by using the Liquid Autosampler CIC to inject the sample directly. The module can be used for samples with a boiling point &lt; 420 °C.<br/>This module can also guide gaseous or LPG samples from the GLS Sampler CIC into the oven.</p>
    • PCS
    • 1
    • Quartz combustion tube (TEI)
    • 6.07311.100
    • Quartz combustion tube for the Combustion Oven (TEI).
    • <p>Quartz combustion tube for the Combustion Oven (TEI).</p>
    • PCS
    • 1
    • Ceramic combustion tube (TEI)
    • 6.07311.110
    • Ceramic combustion tube for the Combustion Oven (TEI).
    • <p>Ceramic combustion tube for the Combustion Oven (TEI).</p>
    • PCS
    • 1
    • Sample cup, quartz, pk=3
    • 6.07311.200
    • Quartz cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.
    • <p>Quartz cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.</p>
    • PCS
    • 1
    • Sample cup, quartz, pk=30
    • 6.07311.210
    • Quartz cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.
    • <p>Quartz cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.</p>
    • PCS
    • 1
    • Sample cup, ceramic, pk=3
    • 6.07311.220
    • Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.
    • <p>Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 3 pcs.</p>
    • PCS
    • 1
    • Sample cup, ceramic, pk=30
    • 6.07311.230
    • Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.
    • <p>Ceramic cup for sample injection in Metrohm Combustion IC (TEI), 30 pcs.</p>
    • PCS
    • 1
    • Slider boat, quartz
    • 6.07311.240
    • Slider boat for the Boat Introduction Module 6.07311.010, quartz.
    • <p>Slider boat for the Boat Introduction Module 6.07311.010, quartz.</p>
    • PCS
    • 1
    • Slider boat, ceramic
    • 6.07311.250
    • Boat drive for sample boat of the 6.07311.020 Boat Introduction Module, ceramic.
    • <p>Boat drive for sample boat of the 6.07311.020 Boat Introduction Module, ceramic.</p>
    • PCS
    • 1
    • Boat guiding tube
    • 6.07311.260
    • Boat guiding tube for the Boat Introduction Module quartz (6.07311.010) or ceramic (6.07311.020).
    • <p>Boat guiding tube for the Boat Introduction Module quartz (6.07311.010) or ceramic (6.07311.020).</p>
    • PCS
    • 1
    • O-Ring Set (TEI), silicone
    • 6.07311.270
    • O-Ring Set (TEI) for the combustion tube and the guide tubing for the Boat Introduction Module.
    • <p>O-Ring Set (TEI) for the combustion tube and the guide tubing for the Boat Introduction Module.</p>
    • PCS
    • 1
    • Septum for Introduction Module (TEI)
    • 6.07311.290
    • Septum for liquid injection port of the Introduction Modules (TEI) 6.07311.010, 6.07311.020, 6.07311.030, 6.07311.040.
    • <p>Septum for liquid injection port of the Introduction Modules (TEI) 6.07311.010, 6.07311.020, 6.07311.030, 6.07311.040.</p>
    • PCS
    • 1
    • Septum cap Liquid Introduction Module
    • 6.07311.300
    • Lid for fastening the 6.07311.290 septum in place in the Liquid Introduction Module.
    • <p>Lid for fastening the 6.07311.290 septum in place in the Liquid Introduction Module.</p>
    • PCS
    • 1
    • Oxygen and UPW supply tubing (TEI)
    • 6.07311.310
    • Tubing for oxygen and ultrapure water supply at the inlet to the combustion tube (TEI).
    • <p>Tubing for oxygen and ultrapure water supply at the inlet to the combustion tube (TEI).</p>
    • PCS
    • 1
    • Syringe 100 µl manual injection (TEI)
    • 6.07313.100
    • Dosing syringe for manual injection of liquid samples using one of the three Introduction Modules (6.07311.010, 6.07311.020, or 6.07311.030).
    • <p>Dosing syringe for manual injection of liquid samples using one of the three Introduction Modules (6.07311.010, 6.07311.020, or 6.07311.030).</p>
    • PCS
    • 1
    • Replacement needle for CIC (TEI)
    • 6.07313.110
    • Replacement needle (TEI) for dosing syringe for Liquid Autosampler CIC (2.0136.0610) or manual liquid sample injection.
    • <p>Replacement needle (TEI) for dosing syringe for Liquid Autosampler CIC (2.0136.0610) or manual liquid sample injection.</p>
    • PCS
    • 1