Automated TAN/TBN analysis
MATi 02
- Prehľad vlastností
PC-controlled, fully automatic analysis system for the direct determination of TAN or TBN values in mineral oil products in series of up to 59 samples. The analysis is carried out in accordance with ASTM standards D664 and D2896. The system is noteworthy for its special resistance to the solvents used in this application. The data acquisition and the complete control of the system takes place via the proven OMNIS software.
Doplňte Váš Automated TAN/TBN analysis
Stiahnúť PDF s príslušenstvom
Stiahnúť PDF s príslušenstvom- súčasti
- voliteľné časti
854 iConnect / 3 m
6.9921.223
The 854 iConnect - Electrode cable and measuring amplifier for intelligent "iTrodes" electrodes. This version has a 3 m long cable and is therefore intended for use in automated systems.
786 Swing Head
2.786.0040
Additional equipment for Robotic Sample Processors XL without titration or transfer heads.
800 Dosino
2.800.0010
The 800 Dosino is a drive with write/read hardware for intelligent Dosing Units. With fixed cable (length 150 cm).
802 Stirrer for sample changer
2.802.0020
Rod stirrer for sample changer and Sample Processor.With 104 mm 6.1909.020 stirring propeller and permanently installed cable.
Zobraziť viac
