Benefit from more than 2,200 state-of-the-art applications, conducted with the most accurate and efficient lab technology.
Water (surface, sea, etc.)
Accurate analyzers are required to test water samples with high salinity or organic load
71% of our planet is covered by water. But all water is not equal, and analyzing different water types offers different challenges in the form of sample preparation and/or matrix interferences.
Measuring critical contaminants in water requires analyzers capable of measuring low concentrations. However, they must also be capable of handling samples with high organic loads or high salinity.
Metrohm provides high-quality analytical instruments, extensive application knowledge, and excellent service to support the analysis of your water samples.
Discover our latest solutions for your analysis
Determining dissolved oxygen in water – Titration or direct measurement?
Download this White Paper to learn more about the analysis of dissolved oxygen using either the Winkler titration or optical sensors.
Produkty
From high-salinity seawater analysis to nutrient monitoring in surface waters, our instruments provide the precision and reliability needed for informed environmental monitoring.
940 Professional IC Vario
Jeden prístroj – maximálna flexibilita: Iónový chromatograf prakticky bez obmedzení na individuálnu konfiguráciu a prispôsobenie systému.
Prenosný VA analyzátor
Prenosné voltametrické analyzátory na stanovenie stopových koncentrácií ťažkých kovov v teréne.
OMNIS titrácia
Pripravte sa na dosiahnutie nového štandardu v titrácii: rýchlejšie výsledky, bezpečnejšia manipulácia s reagenciami a jednoduchšie prispôsobenie sa vašim požiadavkám.
- AN-EC-038Measuring ionic conductivity using screen-printing technology
Using disposable 11COND screen printed electrodes and electrochemical impedance spectroscopy, conductivity in drinking water can be measured using only 100 µL samples.
- WP-097Why switch to OMNIS Client/Server (C/S)?
OMNIS Client/Server boosts business performance with scalable server management, cutting costs by reducing hardware, energy use, and maintenance across locations.
- AN-M-017IC-MS/MS analysis of trifluoroacetic acid according to DIN 38407-53
The new DIN draft standard 38407-53 outlines TFA analysis in water using direct injection LC-MS/MS, enabling quantification from 0.1–3.0 μg/L as shown in this Application Note.
- AN-RA-010SERS detection of pesticides using screen-printed electrodes
EC-SERS enhances Raman sensitivity using electrochemically activated gold SPEs, enabling rapid, simplified pesticide detection without complex prep or instrumentation.
- AN-SENS-002Detection of heavy metals with differential pulse voltammetry
This Application Note presents DPV as a sensitive, selective method for detecting heavy metals in water, detailing setup, parameters, and advantages over other techniques.
Podujatia & webináre
Haven't found what you are looking for?
Talk to your Metrohm representative and learn about the best solution for your needs.