Pick&Place module
2.1014.0010
- Обзор функций
Module for installation in the module plate of the Pick&Place of the OMNIS Sample Robot. This workstation takes up the sample beaker for the analysis. Used sensors are cleaned or parked in the storage beaker of the Pick&Place module between analyses. If stirring is required during the analysis, then a separate rod stirrer must be used for this workstation.
Комплектация Pick&Place module
Скачать перечень аксессуаров PDF
Скачать перечень аксессуаров PDF- комплектация
- опциональные аксессуары
Silicone tubing 8/12 2.5 m
6.01803.000
Silicone tubing for connecting to the drainage of the Pick&Place module or pump module in order to channel any solution overflows that may occur safely into the waste canister.
Tubing clip to workstation (10 pcs)
6.02704.000
For fixing in place the PVC or PTFE tubing that leads to the workstation.
Tubing and cable guide
6.02705.000
For organizing tubing and cables between Pick&Place module and titrator
Safety shield for Pick&Place module
6.02700.000
Safety shield for Pick&Place modules
Показать
