You have been redirected to your local version of the requested page
Solicitați o ofertă
 Voltage and pH measurement module

 Voltage and pH measurement module

pX1000.S

 Voltage and pH measurement module

en

pX1000.S

Prezentare generală a caracteristicilor

The pX1000 allows the measurements of pH or pX values during electrochemical experiments. This module also provides an additional Pt1000 input which allows recording of the temperature during the experiments, either through a Pt1000 sensor or through a combined pH/Pt1000 sensor. The temperature measurement allows automatic pH corrections.

The pX1000 module can also be used as an additional differential electrometer, with the same specifications as the main Autolab electrometer. The pX1000 module is compatible with the Metrohm pH and temperature sensors.

The user can connect any pH, pX or ‘double’ electrode to the pX1000 module. In case an electrode other than a pH electrode is used, the output is given as the voltage difference that is measured between the electrodes making it possible to connect a detection electrode to perform coulometric titration. The pX1000 module also works as an independent pH meter.
 

Specificații tehnice

Input range in volt± 10
Potential accuracy in volt± 0.002
Potential resolution3 µV (gain 100)
Input impedance in Ohm1 T
Temperature accuracy± 0.5 ˚C
Temperature resolution0.015 ˚C
    • pX1000 V+/V- cables
    • pX1000.LEMO.BAN
    • Differential input cables for the pX1000 module. Two cables are provided, V+ and V-.
    • <p>Differential input cables for the pX1000 module. Two cables are provided, V+ and V-.</p>
    • PCS
    • 1
    • pX1000 input cover
    • pX1000.LEMO.CVR
    • Cover for unused inputs of the pX1000 module.
    • <p>Cover for unused inputs of the pX1000 module. </p>
    • PCS
    • 1
    • pX1000 V+/V- cables
    • pX1000.LEMO.BAN
    • Differential input cables for the pX1000 module. Two cables are provided, V+ and V-.
    • <p>Differential input cables for the pX1000 module. Two cables are provided, V+ and V-.</p>
    • PCS
    • 1
    • pX1000 input cover
    • pX1000.LEMO.CVR
    • Cover for unused inputs of the pX1000 module.
    • <p>Cover for unused inputs of the pX1000 module. </p>
    • PCS
    • 1
    • Solitrode with Pt1000 (fixed cable 1.2 m)
    • 6.0228.000
    • Combined pH electrode with integrated Pt1000 temperature sensor and fixed cable (1.2 m). This electrode is suitable for routine pH measurements in solutions that do not contain precipitates, proteins, or sulfides. This electrode is mechanically resistant thanks to the robust/unbreakable plastic shaft made of polypropylene and impact protection for the glass membrane.Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.
    • <p>Combined pH electrode with integrated Pt1000 temperature sensor and fixed cable (1.2 m). This electrode is suitable for routine pH measurements in solutions that do not contain precipitates, proteins, or sulfides. This electrode is mechanically resistant thanks to the robust/unbreakable plastic shaft made of polypropylene and impact protection for the glass membrane.</p><p>Reference electrolyte: c(KCl) = 3 mol/L, storage in storage solution.</p>
    • PCS
    • 1
    • Pt1000 temperature sensor for 909 UV Digester
    • 6.1110.010
    • Pt1000 temperature sensor (class B) made of glass with fixed cable (0.5 m) for connecting to a 909 UV Digester.
    • <p>Pt1000 temperature sensor (class B) made of glass with fixed cable (0.5 m) for connecting to a 909 UV Digester.</p>
    • PCS
    • 1
    • Pt1000 temperature sensor (installation length 12.5 cm)
    • 6.1110.100
    • Pt1000 temperature sensor (class B) made of glass.This PT1000 temperature sensor is also available under the article number 6.1110.110 with an installation length of 17.8 cm.
    • <p>Pt1000 temperature sensor (class B) made of glass.</p><p>This PT1000 temperature sensor is also available under the article number 6.1110.110 with an installation length of 17.8 cm.</p>
    • PCS
    • 1
    • Pt1000 temperature sensor made of stainless steel
    • 6.1114.010
    • Pt1000 temperature sensor (class B) with fixed cable (1.2 m), with a needle made of stainless steel and a PEEK shaft. This glass-free temperature sensor is well suited for measurements:in semisolid materials (e.g., cheese, meat); in non-oxidizing materials at pH 1 to 13;
    • <p>Pt1000 temperature sensor (class B) with fixed cable (1.2 m), with a needle made of stainless steel and a PEEK shaft. This glass-free temperature sensor is well suited for measurements:</p><ul><li>in semisolid materials (e.g., cheese, meat)</li><li>in non-oxidizing materials at pH 1 to 13</li></ul>
    • PCS
    • 1