Metrosep C Supp 1 - 100/4.0
6.1052.410
Metrosep C Supp 1 - 100/4.0
en
6.1052.410
Visão geral
The short version of the Metrosep C Supp 1 is used for the rapid determination of cations in the µg/L range with conductivity detection following sequential suppression.
The baseline noise in cation analysis is improved by the suppression. This results in lower detection limits for the cations to be determined.
Especificações técnicas
| Housing material | PEEK |
|---|---|
| Carrier material | Polyvinyl alcohol with carboxyl groups |
| Particle size | 5 µm |
| Standard flow | 1.0 mL/min |
| Maximum pressure | 15 MPa |
| Maximum flow | 1.5 mL/min |
| pH range | 1–12 |
| Column dimensions | 100 x 4.0 mm |
| Temperature range | 20–40 °C |
| Standard temperature | 40 °C |
Cromatograma
-
- Metrosep C Supp 1 Guard/4.0
- 6.1052.500
- The Metrosep C Supp 1 Guard/4.0 contains the C-Supp-1 column material and is used to protect Metrosep C-Supp-1 cation columns. Particles and contamination are reliably retained, considerably prolonging the service life of the analytical separation column. The Metrosep C Supp 1 Guard/4.0 also works based on the "On Column Guard System" and is screwed directly onto the separation column with virtually no dead volume.
- <p>The Metrosep C Supp 1 Guard/4.0 contains the C-Supp-1 column material and is used to protect Metrosep C-Supp-1 cation columns. Particles and contamination are reliably retained, considerably prolonging the service life of the analytical separation column. The Metrosep C Supp 1 Guard/4.0 also works based on the "On Column Guard System" and is screwed directly onto the separation column with virtually no dead volume.</p>
- PCS
- 1