856 Conductivity Module with tiamo™ light, including conductivity measuring cell (stainless steel)
2.856.0220
11 Recenzji/(je) na portalu SelectScience
- Przegląd funkcji
High-end conductometer, based on the 856 Conductivity Module, including tiamo™, conductivity measuring cell (stainless steel) and calibration standards. The stainless steel measuring cell is particularly suitable for the measurement of low conductivities.
The Conductivity Module has two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos. Integrated in tiamo™ (from 2.0), the 856 Conductivity Module complies with GLP and FDA 21 CFR part 11 requirements.
Ten produkt został wycofany ze sprzedaży, ale nadal jest wspierany
Dowiedz się więcej: 856 Conductivity Module with tiamo™ light, including conductivity measuring cell (stainless steel)
867/856 pH/konduktometr modułowa budowa
Wysokiej klasy moduły do indywidualnych pomiarów pH, jonów i przewodności.Dlaczego?
Wyposaż Twój 856 Conductivity Module with tiamo™ light, including conductivity measuring cell (stainless steel)
Pobierz akcesoria pdf
Pobierz akcesoria pdf- części w zestawie
- opcjonalne części
Conductivity measuring cell c = 0.1 cm-1 with Pt1000 (fixed cable)
6.0916.040
Conductivity measuring cell made of stainless steel with cell constant c = 0.1 cm-1 (guide value), with integrated Pt1000 temperature sensor and fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of low conductivities (0 µS/cm to 300 uS/cm) in e.g., deion. water or for measurements in accordance with USP 645>.
Support stand without support rod
6.2001.060
To attach an 801, 804, 803 Stirrer to a Titrando, Titrino plus, Dosimat plus or 856 and 867.
Clamping ring
6.2013.010
For support rods with a diameter of 10 mm.
Support rod / 400 mm
6.2016.070
Zobacz więcej
