856 Conductivity Module with tiamo™ light, including 5-ring conductivity measuring cell
2.856.0210
11 Recenzji/(je) na portalu SelectScience
- Przegląd funkcji
Conductivity module for operation with a PC, including tiamo™ light software, 5-ring conductivity measuring cell and calibration standards.
With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells.
The Conductivity Module has two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos.
Integrated in tiamo™ full (from 2.0), the 856 Conductivity Module complies with GLP and FDA 21 CFR part 11 requirements.
Ten produkt został wycofany ze sprzedaży, ale nadal jest wspierany
Dowiedz się więcej: 856 Conductivity Module with tiamo™ light, including 5-ring conductivity measuring cell
867/856 pH/konduktometr modułowa budowa
Wysokiej klasy moduły do indywidualnych pomiarów pH, jonów i przewodności.Dlaczego?
Wyposaż Twój 856 Conductivity Module with tiamo™ light, including 5-ring conductivity measuring cell
Pobierz akcesoria pdf
Pobierz akcesoria pdf- części w zestawie
- opcjonalne części
5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)
6.0915.100
5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;
Support stand without support rod
6.2001.060
To attach an 801, 804, 803 Stirrer to a Titrando, Titrino plus, Dosimat plus or 856 and 867.
Clamping ring
6.2013.010
For support rods with a diameter of 10 mm.
Support rod / 400 mm
6.2016.070
Zobacz więcej
