Metrosep I Trap 1 - 100/4.0
6.1014.200
Metrosep I Trap 1 - 100/4.0
en
6.1014.200
Oversikt over funksjoner
The Metrosep I Trap 1 - 100/4.0 column is used to eliminate ionic, i.e. cationic and anionic, contaminants from aqueous solutions. Its use is especially recommended for the purification of the transfer water in combination with "MISP" or "Metrohm Inline Sample Preparation". Using the Metrosep I Trap 1 - 100/4.0 column can significantly reduce the influence of the transfer water on the system blank.
Tekniske spesifikasjoner
| Housing material | PEEK |
|---|---|
| Particle size | 300–840 µm |
| Maximum pressure | 25 MPa |
| pH range | 1–14 |
| Column dimensions | 100 x 4.0 mm |
-
- Threaded stopper
- 6.2744.060
- For UNF 10/32. Stopper for IC, e.g. for the sealing of columns.
- <p>For UNF 10/32. Stopper for IC, e.g. for the sealing of columns.</p>
- PCS
- 2
-
- Threaded stopper
- 6.2744.060
- For UNF 10/32. Stopper for IC, e.g. for the sealing of columns.
- <p>For UNF 10/32. Stopper for IC, e.g. for the sealing of columns.</p>
- PCS
- 2