[{"header":"Oversikt over funksjoner","text":"

The NIRS XDS Process Analyzer – SingleFiber provides the next generation of process analyzers for real-time analysis in the pharmaceutical and chemical industries. Non-destructive, accurate measurements of clear liquids are performed directly in the process line or in a reaction vessel. Up to 9 probes and/or flow-cells can be connected to the analyzer. All 9 channels can be configured independently from each other in the software. Single Fiber optics allows the 9 measuring points to be up to 100 meter away from the XDS NIR process analyzer.

","type":"text"},{"header":"Tekniske spesifikasjoner","text":"

Technical specifications
Wavelength range: 800 - 2,200 nm
Detector: Extended InGaAs (Indium Gallium Arsenide)
Data Increment: 0.5 nm
Average time per result: 3 - 30 seconds

General
Lifetime of the light source: = 8000 h
Power supply: 100 - 240 VAC, 50 - 60 Hz, 1 A,
Power consumption: 100 W typical, max. 300 W
Software package: Vision for instrument operation and method development
Standard Operating temperature: 0 - 35 °C (32 - 95 °F)
Humidity: 10 - 90% relative
Weight: 42.2 kg (93 lbs)
Dimensions (W x H x D): 407 x 610 x 362 mm (16 x 24 x 14.25 inches)
Housing: basic device IP65/Nema 4X, stainless steel
Various enclosure options for hazardous areas or environmental conditions outside the above mentioned conditions available.

Fiber Optics and Probes

Single Fiber Optic Cable with SMA connectors at the analyzer and probe (requires probe or flow-through cell for use)
Stainless Steel or Hastalloy Probes (other materials available as well)
Micro Transmission Probe Pair
Single-sided Transmission Probe
Purge and 45 degree angle probe
Transmission flow-through cell

Process Communication Options

OPC
Digital protocols
MODBUS, PROFIBUS, etc.
VISION I/O Modules
Available with 8, 16, or 24 Analog Channels, 24 Digital Channels

","type":"text"}]

NIRS XDS Process Analyzer – SingleFiber 9 Channels

2.928.0230