元の言語のページへ戻りました
dProfitrode

dProfitrode

6.00204.300

dProfitrode

ja

6.00204.300

特長

ダブルジャンクションシステムを装備した OMNIS 用デジタル複合 pH 電極。この電極は、以下のようなサンプルの pH 測定/滴定に適しています:

  • センサーの参照システムを汚すサンプル (例えば浴槽、硫化物を含むサンプルなど)
  • 塩化カリウム c(KCl) = 3 mol/L に参照内部液として用いることのできないサンプル (例えばサンプルとカリウムまたは塩化物の反応など)

電極には、必要に応じて取り換えることのできる、汚れに耐性のあるフレキシブルなグランドジョイントダイアフラムが装備されています。
塩橋(えんきょう) として c(KCl) = 3 mol / L を使用する場合、保存液中での保存が推奨されます。
塩橋(えんきょう) は、適切な内部液と交換することができます (例えば、硝酸カリウム c(KNO3) = 1 mol/L (6.2310.010))。使用される電解液にて保管します。
dTrode は OMNIS Titrator にて使用できます。

技術仕様

Shaft materialGlass
Measuring unitpH
Temperature range, long-term (°C)0 ... 70
Temperature range, short-term (°C)0 ... 100
使用可能pH範囲0...14
Max. installation length (mm)125
SGJ sleeveフレキシブルなジョイントソケット
Shaft diameter top (mm)12
Shaft diameter bottom (mm)12
Min. immersion depth (mm)30
Electrode plug-in headMetrohm plug-in head Q
Indicator electrode shapeCylinder
Membrane glass typeU
Membrane resistance150 … 500
Electrode zero point (mV)±15
Electrode slope>0.97
DiaphragmGround-joint diaphragm
Reference electrolyte typec(KCl) = 3 mol/L
10 cmの水カラムでの内部液流量 (µL/h)5 ... 100
Reference systemLL system
Resistance (kOhm)< 5
このフィールドは必須です。
    • 保存容器 
    • 6.2008.040
    • ホルダー 6.2008.050 とともに使用すると 807 Dosing Unit の電極用のホルダーになります。
    • <p>ホルダー 6.2008.050 とともに使用すると 807 Dosing Unit の電極用のホルダーになります。</p>
    • PCS
    • 1
    • 保存容器 
    • 6.2008.040
    • ホルダー 6.2008.050 とともに使用すると 807 Dosing Unit の電極用のホルダーになります。
    • <p>ホルダー 6.2008.050 とともに使用すると 807 Dosing Unit の電極用のホルダーになります。</p>
    • PCS
    • 1
    • Storage solution
    • 6.2323.000
    • Storage solution for all combined pH glass electrodes with reference electrolyte c(KCl) = 3 mol/L
    • PCS
    • 1
    • pHit kit
    • 6.2325.000
    • Maintenance kit for pH electrodes The kit contains:50 mL cleaning solution; 50 mL 3M KCl solution; 50 mL storage solution; 2 Storage vessels; Instructions for use;
    • PCS
    • 1
    • 洗浄液 3 x 50 mL
    • 6.2325.100
    • Reliable measuring results over long periods of time can be guaranteed only if the pH glass membrane and the diaphragm receive preventive and regular care. Cleaning by etching with toxic chemicals or applying mechanical treatment to the diaphragm is not only complicated and expensive, it also accelerates the ageing of the pH glass electrode.The cleaning solution was developed for easy and gentle cleaning of pH glass electrodes. Regular use can considerably prolong their service life.This cleaning solution is also part of the pHit kit.
    • PCS
    • 1