You have been redirected to your local version of the requested page
Request quote
Conductometric Titrator

Conductometric Titrator

2.856.1210

This product has been discontinued, but is still supported.
    • 5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)
    • 6.0915.100
    • 5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;  
    • <p>5-ring conductivity measuring cell with cell constant c = 0.7 cm<sup>-1 </sup>(guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.<br />This sensor is suitable for measurements of medium conductivities (5 &micro;S/cm to 20 mS/cm), e.g., in:</p><ul><li>drinking water</li><li>surface water</li><li>wastewater</li></ul><p>&nbsp;</p>
    • PCS
    • 1
    • Piston tongs
    • 6.1546.030
    • For pistons for 807 Dosing Units or cylinder units OMNIS.
    • <p>For pistons for 807 Dosing Units or cylinder units OMNIS.</p>
    • PCS
    • 1
    • Stirring bar / 16 mm
    • 6.1903.020
    • Stirring Bar with magnetic core, PTFE coated, length 16 mm
    • Stirring Bar with magnetic core, PTFE coated, length 16 mm
    • PCS
    • 1
    • Stirring bar / 25 mm
    • 6.1903.030
    • Stirring bar with magnetic core, PTFE covering, length 25 mm.
    • <p>Stirring bar with magnetic core, PTFE covering, length 25 mm.</p>
    • PCS
    • 1
    • Support stand without support rod
    • 6.2001.060
    • To attach an 801, 804, 803 Stirrer to a Titrando, Titrino plus, Dosimat plus or 856 and 867.
    • To attach an 801, 804, 803 Stirrer to a Titrando, Titrino plus, Dosimat plus or 856 and 867.
    • PCS
    • 1
    • Clamping ring
    • 6.2013.010
    • For support rods with a diameter of 10 mm.
    • <p>For support rods with a diameter of 10 mm.</p>
    • PCS
    • 1
    • Electrode holder
    • 6.2021.020
    • Electrode holder for 4 electrodes and 2 buret tips
    • Electrode holder for 4 electrodes and 2 buret tips
    • PCS
    • 1
    • 807 Dosing Unit 20 mL
    • 6.3032.220
    • 807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • 800 Dosino (cable length 1.5 m)
    • 1.800.0030
    • Drive with write/read hardware for intelligent dosing units. With permanently attached cable (length 1.5 m).
    • <p>Drive with write/read hardware for intelligent dosing units. With permanently attached cable (length 1.5 m).</p>
    • PCS
    • 1
    • 801 Stirrer
    • 1.801.0010
    • Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).
    • <p>Magnetic stirrer without stand for supplementing the Titrino plus, Dosimat plus, Titrandos, Sample Processors, 805 Dosimats and 780/781 pH Meters. With permanently attached cable for MSB (Metrohm Serial Bus).</p>
    • PCS
    • 1
    • 856 Conductivity Module
    • 1.856.0010
    • Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. Thanks to the galvanically isolated measuring input, pH value and conductivity can be measured in the same beaker without interference.The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos.Both in conjunction with the 900 Touch Control as stand-alone instrument and also integrated in tiamo™ full (from 2.0), it is in compliance with GLP and FDA 21 CFR part 11 requirements.
    • <p>Conductivity measuring module as supplement to an existing Titrando system or "stand-alone" in combination with a 900 Touch Control. With the 856 Conductivity Module, not only conductivity and temperature can be determined, but also TDS and salinity. It supports state-of-the-art conductivity measuring cells, i.e. 5-ring measuring cells. <br/>Thanks to the galvanically isolated measuring input, pH value and conductivity can be measured in the same beaker without interference.<br/><br/>The Conductivity Module is equipped with two USB interfaces for connecting printers, barcode readers or sample changers and four MSB interfaces for stirrers or Dosinos.<br/>Both in conjunction with the 900 Touch Control as stand-alone instrument and also integrated in <em><strong>tiamo</strong></em>™ full (from 2.0), it is in compliance with GLP and FDA 21 CFR part 11 requirements.</p>
    • PCS
    • 1
    • 5-ring conductivity measuring cell c = 0.7 cm-1 with Pt1000 (fixed cable)
    • 6.0915.100
    • 5-ring conductivity measuring cell with cell constant c = 0.7 cm-1 (guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.This sensor is suitable for measurements of medium conductivities (5 µS/cm to 20 mS/cm), e.g., in:drinking water; surface water; wastewater;  
    • <p>5-ring conductivity measuring cell with cell constant c = 0.7 cm<sup>-1 </sup>(guide value), with integrated Pt1000 temperature sensor and with fixed cable (1.2 m) for connecting to an 856 Conductivity Module.<br />This sensor is suitable for measurements of medium conductivities (5 &micro;S/cm to 20 mS/cm), e.g., in:</p><ul><li>drinking water</li><li>surface water</li><li>wastewater</li></ul><p>&nbsp;</p>
    • PCS
    • 1
    • Piston tongs
    • 6.1546.030
    • For pistons for 807 Dosing Units or cylinder units OMNIS.
    • <p>For pistons for 807 Dosing Units or cylinder units OMNIS.</p>
    • PCS
    • 1
    • Stirring bar / 16 mm
    • 6.1903.020
    • Stirring Bar with magnetic core, PTFE coated, length 16 mm
    • Stirring Bar with magnetic core, PTFE coated, length 16 mm
    • PCS
    • 1
    • Stirring bar / 25 mm
    • 6.1903.030
    • Stirring bar with magnetic core, PTFE covering, length 25 mm.
    • <p>Stirring bar with magnetic core, PTFE covering, length 25 mm.</p>
    • PCS
    • 1
    • Support stand without support rod
    • 6.2001.060
    • To attach an 801, 804, 803 Stirrer to a Titrando, Titrino plus, Dosimat plus or 856 and 867.
    • To attach an 801, 804, 803 Stirrer to a Titrando, Titrino plus, Dosimat plus or 856 and 867.
    • PCS
    • 1
    • Clamping ring
    • 6.2013.010
    • For support rods with a diameter of 10 mm.
    • <p>For support rods with a diameter of 10 mm.</p>
    • PCS
    • 1
    • Electrode holder
    • 6.2021.020
    • Electrode holder for 4 electrodes and 2 buret tips
    • Electrode holder for 4 electrodes and 2 buret tips
    • PCS
    • 1
    • 807 Dosing Unit 20 mL
    • 6.3032.220
    • 807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.
    • <p>807 Dosing Unit with integrated data chip with 20 mL glass cylinder and light protection, mountable to a reagent bottle with ISO/DIN GL 45 glass thread. FEP tubing connection, antidiffusion tip.</p>
    • PCS
    • 1
    • Bottle holder for Dosinos
    • 6.2061.010
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • Bottle holder for up to two Dosinos, mounted on 1 L reagent bottles.
    • PCS
    • 1