µStat-i MXONE multichannel impedance analyzer

DRP-STAT-I-MXONESP

µStat-i MXONE multichannel impedance analyzer

DRP-STAT-I-MXONESP

Feature overview

Multichannel impedance analyzer for multi-user and multidisciplinary electrochemical research that can be designed according to your needs

Tech specs

Operating modes	Configurable Multichannel with EIS
PC interface	Remote Connection; USB
Power	100-230 Vac 50/60Hz
Potential range in volt	±4 V
Compliance voltage range in volt	±5 V
Maximum current in Ampère	±40 mA
Number of current ranges	8 potentiostat ranges; 9 EIS ranges
Number of current ranges remarks	±1 nA to ±10 mA
Number of potential ranges (galvanostat)	2 (applies only to STAT-I-MXONE and STAT-I-MXONES models)
Number of potential ranges remarks (galvanostat)	±100 mV, ±1 V (applies only to STAT-I-MXONE and STAT-I-MXONES models)
Multichannel instrument	Configuration with several WEs sharing AUX and REF
Maximum number of channels	8
Maximum number of WE sharing AUX and REF	8
Potential accuracy	±0.2%
Current accuracy	≤0.5% of current range at 100 nA to 10 mA
Potential resolution	1 mV
Current resolution	0.1% of current output range
Measured potential resolution	0.012% of potential range
Measured current resolution	0.025% of current range 1 pA on lowest current range
Input impedance in Ohm	5*10¹²Ω
External inputs/outputs	2 Analog inputs, 1 Analog output, 2 Digital input/outputs per channel
Weight of the instrument in kg	6
Connects with	DSC4MM; BIDSC4MM; 4MMHCAST8; CASTDIR; BICASTDIR; CASTDIR; BICASTDIR; I-CAST; I-BICAST; 4MMHCAST8
Dimensions	44 x 30 x 14 cm
Additional Informations	All μStat-i MXONE models can be configured with any number of channels (from 2 to 8) and expanded later after purchase. Channels of different specifications cannot be mixed within the same instrument unit. You can configure any channel in floating mode.

Frequency range 1 mHz to 1 MHz