µStat-i MXONE multichannel impedance analyzer

DRP-STAT-I-MXONESP

µStat-i MXONE multichannel impedance analyzer

DRP-STAT-I-MXONESP

Visão geral

Multichannel impedance analyzer for multi-user and multidisciplinary electrochemical research that can be designed according to your needs

Especificações técnicas

Connects with	DSC4MM; BIDSC4MM; 4MMHCAST8; CASTDIR; BICASTDIR; CASTDIR; BICASTDIR; I-CAST; I-BICAST; 4MMHCAST8
Dimensions	44 x 30 x 14 cm
Additional Informations	All μStat-i MXONE models can be configured with any number of channels (from 2 to 8) and expanded later after purchase. Channels of different specifications cannot be mixed within the same instrument unit. You can configure any channel in floating mode.
Operating modes	Configurable Multichannel with EIS
PC interface	Remote Connection; USB
Power	100-230 Vac 50/60Hz
Potential range in volt	±4 V
Maximum current in Ampère	±40 mA
Number of current ranges	8 potentiostat ranges; 9 EIS ranges
Number of current ranges remarks	±1 nA to ±10 mA
Number of potential ranges (galvanostat)	2 (applies only to STAT-I-MXONE and STAT-I-MXONES models)
Number of potential ranges remarks (galvanostat)	±100 mV, ±1 V (applies only to STAT-I-MXONE and STAT-I-MXONES models)
Multichannel instrument	Configuration with several WEs sharing AUX and REF
Maximum number of channels	8
Maximum number of WE sharing AUX and REF	8
Potential accuracy	±0.2%
Current accuracy	≤0.5% of current range at 100 nA to 10 mA
Potential resolution	1 mV
Current resolution	0.1% of current output range
Measured potential resolution	0.012% of potential range
Measured current resolution	0.025% of current range 1 pA on lowest current range
External inputs/outputs	2 Analog inputs, 1 Analog output, 2 Digital input/outputs per channel
Weight of the instrument in kg	6
Compliance voltage range in volt	±5 V
Input impedance in Ohm

Frequency range 1 mHz to 1 MHz