You have been redirected to your local version of the requested page
Chloride in lithium carbonate by potentiometric titration

AN-T-252

2026-11

Chloride in lithium carbonate by potentiometric titration

Determination of chloride in lithium carbonate by potentiometric titration according to draft standard ISO 12403


Summary

Accurate quantification of chloride impurities in lithium carbonate is essential to ensure the material’s suitability for high-performance applications, particularly within the battery industry. During lithium-ion battery production, even trace levels of contamination in the raw materials can influence cathode quality, manufacturing consistency, and overall electrochemical behavior.

This Application Note describes a method for determining chloride content in lithium carbonate by potentiometric back‑titration according to ISO 12403. Excess silver nitrate (AgNO₃) was added to the acid‑dissolved sample, and the remaining silver was titrated with sodium chloride (NaCl) to the first equivalence point. 


Configuration


Sample and sample preparation

This method is applicable to determine chloride content in lithium carbonate (Li2CO3) in the range of 10 mg/kg to 650 mg/kg. The samples are dried at 250 °C for two hours and allowed to cool down before use.


Experimental

OMNIS Advanced Titrator equipped with a dAg-ring electrode.
Figure 1. OMNIS Advanced Titrator equipped with a dAg-ring electrode.

The analysis is carried out on an OMNIS Advanced Titrator (Figure 1) equipped with a dAg-ring electrode. Nitric acid is added to acidify the sample, and a known amount of silver nitrate is added prior to analysis.

A blank measurement is performed and titrated with sodium chloride solution until after the equivalence point. An appropriate mass of sample is weighed and titrated with sodium chloride solution until after the equivalence point.


Results

The samples were tested in duplicate on one day, and once again on the following day. Results are displayed in Table 1. Figure 2 shows an example titration curve for the analysis.

Table 1. Results of the chloride determination in lithium carbonate samples. Sample ID number relates to the expected chloride impurity in mg/kg.
Sample ID (n = 3)Content mean value Cl (mg/kg)SD(rel) in %
100.000.00
5060.043.97
115141.361.93
Titration curve of the chloride content in lithium carbonate.
Figure 2. Titration curve of the chloride content in lithium carbonate.

Conclusion

The OMNIS Titrator provides a fast and reliable determination of chloride in lithium carbonate according to draft standard ISO 12403. The OMNIS system can be expanded to other titration applications as required.

Contact

Metrohm Belgium nv

Drabstraat 198
2550 Kontich

Contact