Document Finder

This brochure shows the benefits of the Swiss-made OMNIS NIR Analyzer for the pharmaceutical market. It covers the topics Applications, Compliance, Automation and Client/Server.

OMNIS pre-calibrations are turnkey, ready-to-use solutions that enable fast and reliable quality control using near‑infrared (NIR) spectroscopy. This brochure provides an overview of all currently available pre-calibrations for the OMNIS NIR Analyzer covering a wide range of food, feed, and non‑food applications.

Biopharmaceutical manufacturers depend on precise monitoring of their bioprocesses to ensure consistency, optimize production, and meet regulatory standards. Real-time insights into critical process parameters are essential to achieving these objectives.Metrohm’s advanced analytical solutions, including process Raman spectroscopy, pH sensors, and dissolved oxygen and CO₂ sensors, provide fast, accurate, and non-destructive monitoring for biotechnological processes. These tools enable seamless integration into existing systems, ensuring precise control over key bioprocess variables.This brochure provides an overview of the essential bioprocess parameters that can be monitored using Metrohm's instruments.

This brochure gives you an insight into Metrohm Lab Robotics solutions. In addition to reasons for laboratory automation in general, you will receive an overview of our project approach for your customized robot system, including a brief presentation of projects that have already been implemented.

Need to take control of your quality control measurements? Learn how integrating the i-Raman NxG alongside primary methods enables fast and simple routine measurements, enhancing lab capabilities by allowing more samples to be measured in less time.

Metrohm Autolab portfolio brochure: a general, all-in-one brochure covering the entire Metrohm Autolab portfolio, including VIONIC and all NOVA-compatible instruments, with hyphenation for EC-Raman, UV-VIS, and SECM, and accessories.

This brochure gives an overview of the highlight in the Metrohm product portfolio for 2026.

NIR spectroscopy ensures confidence, consistency, and quality at every step of food production. Discover the new generation of NIR Analyzers with the OMNIS NIR Analyzer, delivering superior performance for all your food analysis needs.

Modular NIR analysis platform for precise, fast, and compliant measurements.

In explosion-hazard environments in which concentrations of flammable gases, vapors, or dusts occur, it is imperative that measuring instruments be safe to operate and that they trigger no explosions. This brochure introduces the 2060 Ti Ex proof Process analyzer.

GLP and other guidelines oblige users to fully document their analysis data and results. However, the resulting volume of data very quickly shows the limitations of paper, the traditional filing medium. Electronic data processing is the only viable alternative. A software programme is required that collects and archives all measured values and results obtained in the laboratory. The program must run without supervision in the background while the user continues to work on the instrument itself and enters the respective parameters there. Our new Metrodata software "VESUV 3.0 for Windows" meets all these requirements in an ideal manner.

tiamo™ is a control and database software for titrators and dosing devices as well as for complete laboratory automation, including client-server systems. The name tiamo™ stands for «titration and more - tiamo™ can do more than just titrate. tiamo™ is a titration network (NTDS = Networked Titration Data System).

Metrohm ion chromatographs can now also be controlled by Empower 3 Software, enabling the comfortable analysis of anions and cations in almost any matrix. The following brochure describes the advantages of Empower 3 Software.

This brochure introduces the IC Driver for Agilent OpenLab CDS.

MagIC Net is a control and database software for ion chromatography instruments.The software controls the components of the intelligent Metrohm ion chromatography systems as well as their peripheral devices for Liquid Handling and automation.All IC instruments can be controlled by MagIC Net rising from Eco to the microbore IC systems or combustion IC, different detectors (947 Professional UV/VIS Detector Vario, Amperometric Detector), and Sample Changers. MagIC Net supports automation of the systems including Inline Sample Preparation Techniques, intelligent Injection Techniques as well as logical features.

New cation separation column for ion chromatography

Metrohm is continually expanding its own range of columns and improving existing separation column types using state-of-the-art manufacturing processes and materials. The present brochure presents the new Metrosep A Supp 5 - Microbore.

Metrohm is continually expanding its own range of columns and improving existing separation column types using state-of-the-art manufacturing processes and materials. The present brochure describes the Metrosep Carb 2 separation column being offered as part of the iColumn series. It is ideally suited to the separation of sugar alcohols, monosaccharides, and disaccharides.

The Metrosep A Supp 21 column is a high performance anion exchange chromatography column with a selectivity specifically designed for hydroxide eluents. This flyer describes the capabilities of the Metrosep A Supp 21 and explains how the performance is achieved.

The present brochure contains interesting topics on aerosol analysis. The Particle-into-Liquid Sampler, or PILS forshort, is a simple solution for the determiantion of ions in aerosols.

The proven Unitrode with Pt 1000 temperature sensor now also comes with a removable electrode cable. The advantages at a glance:Cost advantage: Lower replacement cost than for an electrode with fixed cable.; Simple storage: The electrode is easy to store between measurement series. There is no cable in the way, as it can be stored separately or remains on the instrument.; Faster electrode changing - easy to assemble even in automated systems: The cable remains permanently installed in the titration system; only the sensor on the titration head has to be changed.; Metrohm‘s contribution to environmental protection: Reduction in cable waste.; Reliability: Thanks to gold-plated contacts, the unique multi-pin connector for lab electrodes offers a high level of signal reliability.;

The proven Ecotrode now available as a maintenancefree gel electrode with aging indicatorIdeal for routine measurements with similar types of samples; Maintenance-free gel electrolytes: Refilling or checking the electrolyte is not necessary; Reliability through aging indicator: The white gel loses its color with use.As long as the decolorized zone is below the marking, accurate results are guaranteed;

The present brochure contains interesting information on the platinum electrode tip.This electrode is characterized by an outstanding chemical resistance through the exclusive use of glass and platinum.

The new gel-filled VA reference electrode is absolutely maintenance-free. It maintains the reference potential over its entire lifetime without regular refilling of electrolytes. For this reason, it is ideal for use in systems which require great stability and reliability in addition to long maintenance intervals, for example at-line and on-line systems or other automated systems, and especially for CVS applications.

The present brochure introduces the Solvotrode easyClean. This electrode enables easy contact-free cleaning of the diaphragm.

The present brochure contains interesting information on the Combined Calcium ion-selective electrode. This electrode is used for direct measurement and titration.

The concentration of ammonium ions is an important parameter to determine the degree of contamination in all kinds of waters. Metrohm’s new ammonia electrode with exchangeable modules or membranes, respectively, is an affordable solution to perform this analysis.

Maintenance-free metal electrodes for redox titration / precipitation titration

The present brochure introduces the Glassy Carbon Electrode Tip. This electrode is characterized by outstanding chemical resistance due to exclusive use of glass and glassy carbon.

The present brochure introduces the Multi-Mode Electrode pro. A number of innovations and improvements makethis electrode even easier to use, easier to maintain, and increase its lifetime. Overall, the result is an even more reliable electrode for polarography and voltammetry.

Voltammetry using the scTRACE Gold offers a simple, low-cost alternative to the spectroscopic determination of arsenic. The electrode provides an easy and reliable means of monitoring the limit value for arsenic in drinking water of 10 µg/L. In fact, the detection limit with the scTRACE Gold is well below this concentration. The scTRACE Gold can be used with any Metrohm voltammetry measuring stand.

NEW: The proven all-rounder with Pt1000 temperature sensor now also with easyClean diaphragm – truly a clean affair! The present brochure provides you with its benefits at a glance.

This brochure provides further information on the silver/silver chloride reference electrode. The silver/silver chloride (Ag/AgCl) reference electrode is nowadays the most widely used reference electrode for potentiometric measurement and can be applied for the same applications as the SCE.

This brochure provides you information about the pHit kit. The pHit kit allows easy and gentle cleaning of pH electrodes.

This brochure provides further information on the spearhead electrode with integrated Pt1000 temperature sensor.

This brochure provides further information on the combined Ag ring electrode. The combined Ag ring electrode is both a measuring and reference electrode in one. It requires less space in the titration vessel, thus the total volume can be reduced, resulting in less waste, but still guaranteeing superior results.

This brochure provides further information on the Ag Titrode.

The combined fluoride ion selective electrode integrates both the measuring and reference electrode as well as a temperature sensor in a single housing. This design saves space, which makes this sensor ideal for measurements in small sample volumes.

The Bi drop electrode from Metrohm is a novel non-toxic alternative for metal analysis down to the ppt range. This electrode provides straightforward determination of heavy metals in drinking water completely mercury-free. Since the Bi drop electrode does not require mechanical treatment, it is especially suitable for online applications.

Titration with a photometric sensor is a widely used titration technique. In this brochure, we introduce you to the advantages of the Optrode and several application examples.

The 731 Relay Box is a supplementary instrument for controlling up to 4 external devices.

The 756 and 831 Coulometers continue Metrohm’s established line of Karl Fischer instruments for the determination of low-level water contents. Traces right down to the lower micro range can be determined with guaranteed precision and accuracy. Main features: Standard dialogue languages: English, French, German, Spanish, Portuguese, Swedish and Italian ; Backlit screen with graphic capabilities (live curve) ; Change of KF solution at the touch of a button ; Flexible but easy to operate ; Cell with or without diaphragm ; Methods memory ; Thermal sample preparation with KF oven ; Stand-alone or software-controlled ;

A handy instrument, powered by a solar cell, for the easy and rapid checking of titrators, KF instruments, pH meters, conductometers and Rancimats.

This pH meter generation offers numerous possibilities. In addition to the general functions for measuring pH, potential and temperature, the new pH meters boast features such as the optimized GLP-compliant electrode test as well as monitoring and service intervals. With the 781 pH/Ion Meter you can determine ion concentrations at a level of comfort offered only by Metrohm.

Cyclic Voltammetric Stripping (CVS) and Cyclic Pulse Voltammetric Stripping (CPVS) are widely used methods in the electroplating industry for the determination of organic additives in electroplating baths. The most important fields of application:Suppressors DT - Dilution Titration; Brighteners LAT - Linear Approximation TechniqueMLAT - Modified Linear Approximation Technique; Leveler RC - Response Curve;

The 797 VA Computrace opens up new possibilities:Voltammetric trace analysis and additive determination in electroplating baths with a single instrument; Outstanding sensitivity thanks to a combination of the unique Multi-Mode Electrode with the newly designed potentiostat; Automation with the 863 Compact Autosampler or 838 Advanced Sample Processor; Data archiving in the database program Autodatabase with report generator; More than 220 important analytical methods are supplied; Output of the result in as many formats as required; Unique EXPLORATORY mode specially designed for training students in technical colleges and universities. Ideal in combination with the Metrohm monographs «Introduction to Polarography and Voltammetry and «Practical Voltammetry; Built-in quality assurance with GLP mode, individual rights of access for each user and automatic electrode test; Simple operation thanks to the clearly laid out user interface oriented on Windows operating procedures;

The 797 VA Computrace is a modern voltammetric measuring stand that is connected to a PC via a USB port. The PC software provided controls the measurement, records the measured data and evaluates it. Operation is most straightforward due to the well-laid-out structure of the program. All of the methods described in the Metrohm Application Bulletins and Application Notes are already pre-installed.The newly designed integrated potentiostat with galvanostat guarantees the highest sensitivity with reduced noise. And of course the unique Multi-Mode Electrode pro (MME pro) and rotating disk electrode (RDE) made of various materials are available as the working electrodes.

Precise and reproducible results; Simple automation for medium numbers of samples; Measuring and titration directly in the sample beaker; Reliable, robust and safe; Grows along with your requirements;

Precise and reproducible results; Automation for high numbers of samples; Sample preparation and Liquid Handling; Parallel preparation and analysis; Reliable, robust and safe; Greatest possible flexibility;

The Robotic Soliprep is a new version of the proven 815 Robotic USB Sample Processor that makes everyday routine work easier for you. The main area of utilization for the Robotic Soliprep systems is professional preparation of your samples.

Metrohm instruments are known for their precision and reliability. Thanks to their robust construction they are hardly ever affected by external mechanical or electrical influences. Even though a malfunction can never be completely excluded, it is normally due to operator errors, faulty connections or third-party instruments. Should you ever suspect a fault in a Metrohm instrument, it is always advisable to localize the problem using fast and easy to perform diagnostic tests. These diagnostic tests require tools that are not readily found in the laboratory. The 822 Titration Curve Simulator is such a tool.

The 838 Advanced VA Sample Processor allows the fully automatic and extremely flexible processing of large sample series in the routine monitoring of electroplating baths.

The 846 Dosing Interface and the 800 Dosino turn the basic liquid handling operations into child's play. The 846 Dosing Interface is a control unit for up to four dosing elements. It can be used to expand existing Metrohm systems but also deals, as an independent system, with any liquid handling task occurring in the laboratory.

The system consists of 848 Titrino plus, 869 Compact Sample Changer, 802 Rod Stirrer, Ecotrode plus and additional accessories. The comprehensive accessories allow the easy and fast installation of the system, which is immediately ready for operation. A large number of predefined methods, combined with extremely easy operation, allow one to use the system without time-consuming configuration, user training or method optimization.

The Titrino plus range is Metrohm’s entry class in potentiometric titration. Its price-performance ratio is amazing.

The two coulometers 851 Titrando and 852 Titrando extend and complete the Titrando family of instruments. The advantages of the new coulometers:Parallel coulometric and volumetric titrations with the 852 Titrando; Bromine index; Automatic titration start; Automatic reagent replacement;

The 855 Robotic Titrosampler integrates automatic sample preparation and titrimetric analysis in a very small space. Main advantages:Space savings through compact design; Time savings due to automated routine tasks; Automatic sample preparation; High reproducibility and accuracy; High sample throughput; Automatic cleaning and conditioning of the sensor; Sample rack can be chosen at will; Stand-alone operation with Touch Control or software control through OMNIS; Possibility of connecting three burets; Robust and reliable; Tailorable packages for standard applications;

The 856 Conductivity Module introduces the five-ring measuring technique for conductivity measurements with a large linearity range. The 867 pH Module can be used with conventional potentiometric sensors for pH and ion measurement or with the «iTrodes» - the new generation of intelligent electrodes.

Simple, safe, precise - The KF oven method allows even for unsuitable substances to be prepared for Karl Fischer titration.

The 862 Compact Titrosampler - an all-in-one titrator and autosampler - is a completely automated titration station that takes up only as much bench space as a typical analytical balance. Forget lengthy system configuration processes and hours of user training. A large number of predefined titration methods, combined with straightforward operation, allow the system to be used immediately after installation.

Economical automation for voltammetric trace analysis.

Metrohm Dosimats facilitate the routine tasks of liquid handling and dosing in laboratories all over the globe. The new Dosimats can be used as independent, manually controlled instruments or as automatic dosing devices for the Titrino/Titrino plus titrators.

The present brochure introduces the 870 KF Titrino plus. The favorably priced 870 KF Titrino plus is Metrohm’s Karl Fischer titrator for volumetric water determinations.

ProcessLab - Monitoring wet-chemical Processes in Solar Cell ProductionYour advantages at a glance:Customized analyzer for comprehensive process control; Longer useful bath lives thanks to optimal use of the process window; Calibration-free, absolute determinations; Monitoring of several production lines; Traceability and compliant documentation thanks to integrated data management; Integration and control of external devices including data transfer; Export and import of data via Ethernet or 4...20-mA interfaces;

Accurate, reproducible results at the touch of a screen: The 875 Karl Fischer Gas Analyzer is a fully automated solution for reliable water determination in liquefied and permanent gases. Have a look at our brochure to get more information about the 875 Karl Fischer Gas Analyzer.

The 884 Professional VA in combination with viva software is currently the most modern and most flexible analysis system for voltammetry and polarography. The 884 Professional VA is outstanding for its unique flexibility. Due to its modular design, the system can be expanded at any time with additional components such as dosing devices, pumps, and sample changers.

Affordable, automated sample preparation for Karl Fischer titration.

The present brochure lays out convincing advantages of the 888 and 890 Titrando.

The 892 Professional Rancimat is used to determine the oxidation stability of natural oils and fats, fatty foods and cosmetics according to the Rancimat method. With the device and the StabNet software, you can easily and reliably determine the induction time of your samples according to the following standards: AOCS Cd 12b-92; ISO 6886; 2.4.28.2-93.

The 893 Professional Biodiesel Rancimat is an analyzer system for the simple and safe determination of the oxidation stability of biodiesel (fatty acid methyl ester, FAME) and biodiesel blends according to the standards EN 14112, EN 15751 and EN 16568. With 8 measuring positions in 2 heating blocks. The built-in display shows the status of the instrument and each measuring position. The cleaning effort can be reduced to a minimum by practical disposable reaction vessels and dishwasher-safe accessories.

This brochure presents the 894 Professional CVS portfolio, including automation and the viva software.

The 895 Professional PVC Thermomat is used to determine the thermal stability of polyvinyl chloride (PVC) and related copolymers.With 8 measuring positions in 2 heating blocks. The built-in display shows the status of the instrument and each measuring position.

Although small and compact, the 899 Coulometer does not compromise on performance. Water contents can be determined with utmost precision down to trace levels. Extremely small & compact; Maximum flexibility due to independent power supply; Automatic titration start; Built-in magnetic stirrer; Integrated titration cell holder ;

Powerful as a PC, smaller than a netbook and a brilliant touchscreen - that is the 900 Touch Control. Metrohms benchtop control module makes titration easier, safer and faster than ever before.

Convincing advantages:The Magic Touch - Favorites for quick titration start; iConnect - mobile measuring input with digital data transmission; iTrodes - intelligent sensors for automatic electrode detection; Intelligent dosing elements; Karl Fischer and SET titration; Sample Processor control; Client server database with tiamoTM; Parallel titration with tiamoTM; Liquid Handling with the disposable Dosino; Fully compliant with GMP/GLP and with FDA regulations such as 21 CFR Part 11; USB interfaces for sample changer, printer, PC keyboard, barcode reader…; Wireless communication via Bluetooth for printer and balance;

Thanks to its modular design, the Titrando System can be adapted to any application. It meets the requirements of FDA Regulation 21 CFR Part 11. Benefit from the system’s intelligence and communication capabilities!

Titrating means dosing intelligently. The Titrando System gives you the choice. With the 905 and 907 Titrando you dose with Dosinos and Dosing Units that are attached directly onto the reagent bottle. With the 904 and 906 Titrando dosing is carried out by using Exchange Units. One of these is located on the 904 or 906 Titrando, which can control additional Dosimats with their Exchange Units. Mixed systems with Dosing and Exchange Units are possible. This means that your choice doesnt lead you down a blind alley - full flexibility is retained.

Sample preparation for the determination of traces of heavy metals

This brochure gives you an overview about Metrohm's benchtop and portable meters for pH, redox potential, conductivity and dissolved oxygen measurement.

"Reduce to the max" – this is the concept behind Ti-Touch. The compact titrator from Metrohm offers maximum performance in routine analysis in the smallest possible space:- Maximum system integration- Maximum data security and network integration – without a PC- Maximum work safety- Maximum operating convenience

The NIRS XDS MasterLab Analyzer enables rapid, nondestructiveanalysis of solid-state dosage forms such as tablets, capsules, film-coated tablets, gel tablets and gel capsules for manufacturers in the pharmaceutical industry. We are presenting the most important advantages and features for you in this brochure.

The NIRS XDS RapidContent Analyzer enables rapid, nondestructive analyses of solid and liquid formulations and substances. This brochure presents the advantages and features of the NIRS XDS RapidContent Analyzer for you in detail.

The NIRS XDS Interactance OptiProbe Analyzer enables the simple and reliable monitoring of chemical reactions in technical centers and pilot plant stations. This brochure contains the most important advantages and features of the NIRS XDS Interactance OptiProbe Analyzer.

The NIRS XDS RapidLiquid Analyzer enables rapid, precise analyses of liquid formulations and substances. Precise measurement results at the push of a button make the NIRS XDS RapidLiquid Analyzer an equally reliable and simple solution for quality monitoring in laboratories and processes. This brochure shows you the most important advantages and features of the NIRS XDS RapidLiquid Analyzer.

The NIRS XDS MultiVial Analyzer enables rapid, nondestructive analyses of the identity and quality of solid material samples that are transferred into vials. This brochure explains the advantages and features of the NIRS XDS MultiVial Analyzer for you.

The NIRS XDS Transmission OptiProbe Analyzer enables efficient determination of the composition of aqueous products, clear liquids, solvents and viscous samples. This brochure details the advantages and features of the NIRS XDS Transmission OptiProbe Analyzer.

The NIRS XDS SmartProbe Analyzer enables rapid, nondestructive analyses of solid and liquid substances and formulations. This brochure contains information regarding the advantages and features of the NIRS XDS SmartProbe Analyzer.

This brochure gives you an insight into Mira DS, the latest handheld material identification system from Metrohm. With our new Mira DS police officers, hazmat teams, and military personnel can respond to threats faster and safer than ever. The Mira DS' intuitive design requires no instruction at all: Turn it on, put it on the sample, press a button, and get the result – that's it!

Mira P is one of the most compact and fastest portable Raman spectrometers on the market. Hardly any larger than a smartphone and weighing in at only 752 grams, Mira P enables convenient one-handed operation and provides reliable results in just a few seconds. The present brochure describes the advantages and properties of the Mira P.

Handheld Mira devices make identification and verification of materials fast, easy, and reliable – for everyone. Mira devices are available in flexible packages allowing you to select customized kits depending on your industry’s precise requirements. The following brochure introduces the new Mira Flex packages.

PowerPack radically extends the usefulness of Mira – in the lab, the field, or the warehouse. Mira has always been a portable powerhouse – now it can work as long as you do. PowerPack offers you a whole new form of flexibility:Many sampling attachments; Safest, user-friendly operation; Compact size; Now, up to 9 hours of use; In this brochure you can find more information about the new PowerPack for Mira.

Everyone should be able to profit from the advantages of ion chromatography – that is the concept behind the Eco IC. The present brochure describes the advantages of the Eco IC.

Introducing MIRA XTR, the next revolution in handheld Raman devices. MIRA XTR is an alternative to 1064 nm devices for fluorescence rejection.

This brochure presents the MIRA XTR handheld Raman Spectrometer. MIRA XTR is the ideal tool for fast, on-site RMID (Raw Material Identification) of thousands of materials. MIRA XTR is a 785 nm system and combines smaller size, higher resolution, and longer battery life with our patented XTR algorithm to eXTRact a Raman signal even from fluorescent samples.

Metrohm offers a turnkey solution for routine analysis of isocyanates. Based on a dedicated spectral database and a pre-calibration model, this solution enables isocyanate producers and processors, such as polyurethane manufacturers, to reduce the cost of their daily routine analysis while improving the quality of their products.

Pre-calibration for the determination of THC, CBD, CBG, and moisture in dried cannabis.

Pre-calibration for determination of calories, dry matter, lipids, moisture, and nitrogen content in human stool.

The instruments in the new 930 Compact IC Flex family raise ion chromatography to a new level in routine analysis. Developed and equipped in accordance with the requirements of control laboratories for job orders and in-house utilization, the new range of models impresses by the simplicity of their operation and their high reliability.

Metrohm is setting a new standard in ion chromatography with the 940 Professional IC Vario system. 940 Professional IC Vario stands for maximum flexibility in combination with the simplest operation imaginable and unique analysis reliability.

Inline Sample Preparation is indispensable for secure and true analysis. Previously, all sample preparation steps had to be carried out manually. That is history. Nowadays, the opportunity exists of automating this procedure completely and of making each individual step retraceable. The present brochure provides an overview of the various techniques used in Inline Sample Preparation.

In Ion Chromatography, anions, cations, carbohydrates and polar substances are determined in a wide variety of matrices. Depending on the applications, samples must be analyzed that were originally solid, liquid or gaseous. The complete automation of determinations of this type is becoming increasingly important. The present brochure contains interesting information regarding automation in Ion Chromatography.

With the 941 Eluent Production Module, Metrohm integrates inline eluent production in the ion chromatographsof the 940 Professional IC Vario and 930 Compact IC Flex series, as well as in all of the other intelligent ion chromatographs from Metrohm. This brochure introduces you to the advantages of inline eluent production.

Amperometric detectors are an alternative to conductivity and UV/VIS detectors. They are used when electroactive – i.e. oxidizable or reducible – substances are to be determined. The amperometric detector exists as an embedded detector – the IC Amperometric Detector – and as a stand-alone detector – the 945 Professional Detector Vario. The present brochure describes these two instruments

The Portable VA Analyzer is a dedicated solution for water analysis. Such measurements have been routinely performed in the laboratory – mostly for lack of viable alternatives for field use. With the 946 Portable VA Analyzer from Metrohm, there is now such an alternative. This brochure describes the advantages of the 946 Portable VA Analyzer.

The 947 Professional UV/VIS Detector Vario enables reliable and accurate quantification of substances that absorb light in the ultraviolet or visible range. The instrument is operated by the user-friendly MagIC Net software and allows a wide variety of analytes to be determined by direct or indirect detection.

Manual preparation of hydroxide eluents costs valuable laboratory time and requires certain safety measures due to the corrosiveness of such eluents. Moreover, manual handling of chemicals is prone to human error, which can negatively impact the reproducibility of analytical results. The Continuous IC Module is the solution to these issues. Fully automated hydroxide eluent generation with the Continuous IC Module provides for safe handling of hydroxide eluents while improving reproducibility and accuracy of results.

This brochure gives you an overview of the functions of the tabletop 949 pH Meter measuring pH, mV and redox potential. In addition, the brochure lists the recommended and compatible sensors for the respective application.

Food fraud is more common than most people think. Misa puts the latest food testing technology in your hands to help you detect and combat this scourge. With this portable tool, you can instantly identify substances most commonly found in adulterated food.

This brochure shows you the main features of the μStat 200 Bipotentiostat.

This brochure shows you the main features of the μStat 300 Bipotentiostat.

This brochure shows you the main features of the μStat 400 Bipotentiostat/Galvanostat

This brochure shows you the main features of the μStat ECL Electrochemiluminescence Instrument

This brochure shows you the main features of the DropStat Portable Electrochemical Reader

This brochure shows you the main features of the μStat 4000 Multi Potentiostat/Galvanostat

This brochure shows you the main features of the μStat 4000P Multi Potentiostat

This brochure shows you the main features of the μStat-i 400 Bipotentiostat/Galvanostat/EIS and μStat-i 400s Potentiostat/Galvanostat/EIS.

This brochure shows you the main features of the SpectroElectrochemiluminescence instrument for Screen-Printed Electrodes (SpectroECL).

This brochure shows you the main features of the μStat 8000 Multi Potentiostat/Galvanostat

This brochure shows you the main features of the μStat 8000P Multi Potentiostat

This brochure shows the main features of the RAMANPROBE.

This brochure shows you the main features of Spectroelectrochemical cell for bulk electrolysis (PTGRID-TRANSCELL).

This brochure shows you the main features of Spectroelectrochemical Reflection Flow-Cell for Thin-Layer Flow-Cell Screen-Printed Electrodes.

This brochure provides further information on products 110-C110

This brochure provides further information on products 110CSQD and C1110CSQD

This brochure provides further information on products 110GPHOX and C1110GPHOX

This brochure shows you the main features of Screen-Printed Carbon Electrodes modified with Polypyrrole (PPYR) (110PPYR).

This brochure shows you the main features of Screen-Printed Electrodes for Uric Acid Detection (UA10).

This brochure provides further information on product 910

This brochure provides further information on product CELL

This brochure provides further information on product TCELL

This brochure provides further information on products PPAR

This brochure provides further information on product PTAUNINW

This brochure shows you the main features of the Stirrer for Batch Injection Analysis Cell (BIASTIR).

This brochure shows you the main features of the Fluorescence spectroscopy experiments coupled to spectroelectrochemistry now with Screen-Printed Electrodes: real time & in situ (LEDUV280, LEDVIS395, LEDRGB, FLKITSPE, FLKIT, CUV).

This brochure provides further information on products PL1, PL2, PL3, PL4 and PL5

This brochure shows you the main features of Electrochemical Laboratory Kits.

MIRA XTR, AFSO, MIRA PowerPack